18_UPPXF5KBK-T RFExp r1

FCC ID: 2AOAF-800

RF Exposure Info

Download: PDF
FCCID_4508903

TEST REPORT Reference No. ................... : WTF19S10071528W002 V1 FCC ID ................................ : 2AOAF-800 Applicant ............................ : TYLT, inc. Address .............................. : 685 Cochran St.Suite 200 Simi Valley, California, 93065 United States Manufacturer .................... : SHENZHEN GOODWIN TECHNOLOGY CO., LTD 4/F Buiding A, Huayuan Industrial park, Fenghuang No.1 Industrial Address .............................. : Area, Fuyong, Baoan Dist, Shenzhen, China Product............................... : Xact Flip 5K Model(s) ............................ : UPPXF5KBK-T, UPPXF5KXX-T, UPPXF5KB-TC, UPPXF5KXX-TC FCC CFR 47 Part 1.1307 Standards........................... : FCC CFR 47 Part 1.1310 Date of Receipt sample .... : 2019-10-23 Date of Test ....................... : 2019-10-24 to 2019-10-28 Date of Issue ...................... : 2019-11-08 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Services (Shenzhen) Co., Ltd. Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China Tel :+86-755-83551033 Fax:+86-755-83552400 Compiled by: Approved by: Ford Wang / Project Engineer Philo Zhong / Manager Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Page 1 of 14

Reference No.: WTF19S10071528W002 V1 Page 2 of 14 1 Laboratories Introduction Waltek Services (Shenzhen) Co., Ltd is a professional third-party testing and certification laboratory with multi-year product testing and certification experience, established strictly in accordance with ISO/IEC 17025 requirements, and accredited by ILAC (International Laboratory Accreditation Cooperation) member. A2LA (American Association for Laboratory Accreditation, the certification number is 4243.01) of USA, CNAS (China National Accreditation Service for Conformity Assessment, the registration number is L3110) of China.Meanwhile, Waltek has got recognition as registration and accreditation laboratory from EMSD (Electrical and Mechanical Services Department), and American Energy star, FCC(The Federal Communications Commission), CEC(California energy efficiency), ISED Canada (Innovation, Science and Economic Development Canada). It’s the strategic partner and data recognition laboratory of international authoritative organizations, such as Intertek(ETL-SEMKO), TÜV Rheinland, TÜV SÜD, etc. Waltek Services (Shenzhen) Co., Ltd is one of the largest and the most comprehensive third party testing laboratory in China. Our test capability covered four large fields: safety test. ElectroMagnetic Compatibility(EMC), and energy performance, wireless radio. As a professional, comprehensive, justice international test organization, we still keep the scientific and rigorous work attitude to help each client satisfy the international standards and assist their product enter into globe market smoothly. Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTF19S10071528W002 V1 Page 3 of 14 1.1 Test Facility A. Accreditations for Conformity Assessment (International) Country/Region Scope Covered By Scope Note USA FCC ID \ SDoC(VOC/DOC) 1 Canada IC ID \ VOC 2 Japan MIC-T \ MIC-R - Europe EMCD \ RED - Taiwan NCC - ISO/IEC 17025 Hong Kong OFCA - Australia RCM - India WPC - Thailand NTC - Singapore IDA - Note: 1. FCC Designation No.: CN1201. Test Firm Registration No.: 523476. 2. ISED CAB identifier : CN0013. Test Firm Registration No.: 7760A. B.TCBs and Notify Bodies Recognized Testing Laboratory. Recognized Testing Laboratory of … Notify body number TUV Rheinland Intertek Optional. TUV SUD SGS Phoenix Testlab GmbH 0700 Element Materials Technology Warwick Ltd. 0891 Timco Engineering, Inc. 1177 Eurofins Product Service GmbH 0681 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTF19S10071528W002 V1 Page 4 of 14 2 Contents Page COVER PAGE ...................................................................................................................................... 1 1 LABORATORIES INTRODUCTION ................................................................................................................... 2 1.1 TEST FACILITY ............................................................................................................................................ 3 2 CONTENTS ............................................................................................................................................................ 4 3 REVISION HISTORY ............................................................................................................................................ 5 4 GENERAL INFORMATION .................................................................................................................................. 6 4.1 GENERAL DESCRIPTION OF E.U.T ............................................................................................................. 6 4.2 DETAILS OF ACCESSORIES ......................................................................................................................... 6 4.3 TEST MODE ................................................................................................................................................ 6 5 EQUIPMENT USED DURING TEST .................................................................................................................. 7 5.1 EQUIPMENTS LIST ...................................................................................................................................... 7 5.2 DESCRIPTION OF AUXILIARY EQUIPMENT .................................................................................................. 7 5.3 TEST EQUIPMENT CALIBRATION ................................................................................................................ 7 6 RF EXPOSURE ...................................................................................................................................................... 8 6.1 TEST SETUP ............................................................................................................................................... 8 6.2 RF EXPOSURE LIMIT................................................................................................................................... 9 6.3 TEST DATA ................................................................................................................................................. 9 6.4 EUT COUPLING SURFACE AREA ............................................................................................................... 11 7 PHOTOGRAPH – RF EXPOSURE TEST SETUP ......................................................................................... 12 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTF19S10071528W002 V1 Page 5 of 14 3 Revision History Date of Date of Test report No. Receipt Date of Test Purpose Comment Approved Issue sample 2019-10-24 WTF19S1007152 2019-10-23 to 2019-10-29 original - Replaced 8W002 2019-10-28 2019-10-24 WTF19S1007152 2019-10-23 to 2019-11-08 Version 1 Updated Valid 8W002 V1 2019-10-28 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTF19S10071528W002 V1 Page 6 of 14 4 General Information 4.1 General Description of E.U.T Product: Xact Flip 5K Model(s): UPPXF5KBK-T, UPPXF5KXX-T, UPPXF5KB-TC, UPPXF5KXX-TC Model Description: XX means different colors Frequency Range: 110~205kHz Modulation Type: ASK Antenna Type: Coil Antenna Antenna Gain: 0dBi 4.2 Details of accessories Input: USB-C 5V/2A, Output: 5V/2.4A Ratings： Wireless Output: 5W, Battery DC 3.7V, 5000mAh 4.3 Test Mode All the test model(s) and condition(s) mentioned were considered and evaluated respectively by performing full tests, the worst data were recorded and reported. Description Test channel Test mode Full Load* 123.4kHz Transmitting with Ant Half Load 123.4kHz Transmitting with Ant No Load 123.4kHz Transmitting with Ant All the mode were tested and passed, “*” show the worst case mode which were recorded in this report. Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTF19S10071528W002 V1 Page 7 of 14 5 Equipment Used during Test 5.1 Equipments List RF EXPOSURE Last Calibration Item Equipment Manufacturer Model No. Serial No. Calibration Due Date Date MPE Measuring 1 Narda TLE-400 M-0170 2019-07-15 2020-07-14 Instrument 5.2 Description of Auxiliary Equipment Equipment Manufacturer Model No. Specification Wireless charging Waltek Services (Shenzhen) Co., Ltd / 5W receiver Resistive Load Waltek Services / 5W (Shenzhen) Co., Ltd 5.3 Test Equipment Calibration All the test equipments used are valid and calibrated by GUANG ZHOU GRG METROLOGY & TES T CO., LTD. address is No.163, Pingyun Rd. West of Huangpu Ave,Tianhe District, Guangzhou, Guangdong, China. Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTF19S10071528W002 V1 Page 8 of 14 6 RF Exposure Test Requirement: Environmental evaluation and exposure limit according to FCC CFR 47 Part 1.1307 (c) and (d), 1.1310. According KDB680106 D01 RF Exposure Wireless Charging Apps v03 6.1 Test Setup These testing were performed at test configuration as follows. EUT was placed on a table, and the measure probe was placed at a measurement distance of 20cm from the top of EUT to the center of the probe and 15cm from other directions of EUT to the center of the probe.. The EUT was put in different directions (Left, Right, Front, Rear, Top) to obtain the maximum reading. Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTF19S10071528W002 V1 Page 9 of 14 6.2 RF Exposure limit (A) Limits for Occupational / Controlled Exposure Magnetic Field Averaging Time Frequency Range Electric Field Power Density (S) Strength (H) |E|2,|H|2or S (MHz) Strength (E) (V/m) (mW/ cm2) (A/m) (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Magnetic Field Averaging Time Frequency Range Electric Field Power Density (S) Strength (H) |E|2,|H|2 or S (MHz) Strength (E) (V/m) (mW/ cm2) (A/m) (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 6.3 Test Data E-Field(Transmitting with Ant Load): Test Side Separation E-Field MPE Limit(V/m) Result Distance(cm) Measured(V/m) Left 15 2.35 614 Compliance Right 15 2.64 614 Compliance Front 15 2.60 614 Compliance Rear 15 2.59 614 Compliance Top 20 3.01 614 Compliance % of MPE Limit 0.49% Limit 50% Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTF19S10071528W002 V1 Page 10 of 14 H-Field(Transmitting with Ant Load): Test Side Separation H-Field MPE Limit(A/m) Result Distance(cm) Measured(A/m) Left 15 0.35 1.63 Compliance Right 15 0.31 1.63 Compliance Front 15 0.32 1.63 Compliance Rear 15 0.37 1.63 Compliance Top 20 0.45 1.63 Compliance % of MPE Limit 27.61% Limit 50% Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTF19S10071528W002 V1 Page 11 of 14 Remark: The device meets the RF exposure limit at separation distance as specified in §1.1310 of the FCC Rules and meeting all of the following requirements as follows. (1) Power transfer frequency is less than 1 MHz. (2) Output power from each primary coil is less than or equal to 15 watts. (3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. (4) Client device is placed directly in contact with the transmitter. (5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). (6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. 6.4 EUT coupling surface area The inductive area is below: Ant Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTF19S10071528W002 V1 Page 12 of 14 7 Photograph – RF Exposure Test Setup Left Side(measurement distance of 15cm) Right Side(measurement distance of 15cm) Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTF19S10071528W002 V1 Page 13 of 14 Front Side(measurement distance of 15cm) Rear Side(measurement distance of 15cm) Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTF19S10071528W002 V1 Page 14 of 14 Top Side(measurement distance of 20cm) ======End of Report====== Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn


Document Created: 2019-11-08 20:37:01
Document Modified: 2019-11-08 20:37:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC