RF exposure report

FCC ID: 2AO94-H2

RF Exposure Info

Download: PDF
FCCID_3902707

RF Exposure Evaluation Statement Product Name: H3 Model No.：H3-i5202NN, H3-X5202NN, H3-i5202D3, H3-X5202D3, H3-i5202D6, H3- X5202D6, H3-i5202DH, H3-X5202DH, H3-i5201NN, H3-X5201NN, H3-i5201D3, H3-X5201D3, H3-i5201D6, H3-X5201D6, H3-i5201DH, H3-X5201DH FCC ID：2AO94-H3 1.1 RF Exposure Compliance Requirement 1.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. 1.1.2 Limits The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz 17  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion 1.1.3 EUT RF Exposure Operational Mode: BLE Maximum tune-up Power Maximum Peak (dBm) (mW) Tune up Conducted Calculated Exclusion Channel tolerance Output value threshold Power (dB) (dBm) 2402MHZ -0.45 ±1 0.55 1.14 0.35 3.0 2442MHz -0.43 ±1 0.57 1.14 0.36 2480MHz -1.74 ±1 -0.74 0.84 0.27 Conclusion: the calculated value ≤3.0, SAR is exempted.


Document Created: 2018-06-27 14:44:16
Document Modified: 2018-06-27 14:44:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC