Uers Manuall

FCC ID: 2AO89PGMIC

Users Manual

Download: PDF
FCCID_4024632

QUICK START GUIDE © DOWNLOAD THE LATEST FIRWMARE © sEet your miccain Je. We regularly add new features through free firmware updates. This gain should be adapted depending on your sound MICROPHONE GAIN / SENSITIVITY > i PICOBAsE [wavsyuc BCE We highly recommend that you update your PicoMic at its first use, environment. Set it up so that you have medium levels on the VU—meter to benefit from the latest features & developments. (—20dB) when speaking normally. Set it up so you have medium levels when speaking normally. J PICOGEAR 1. Get the latest firmware at picogear.com. A Noise reduction feature is available at higher gains to get a crystal—clear speech quality. 2. Turn your PicoBase on, go to the Settings menu VU METER and select Firmware update. Color bar: RMS value White bar: peak value 3. Follow the instructions on the screen. This will update your PicoBase receiver, and the PicoMics when they are put in the charging dock. OUTPUT MIX SELECTION PAIR YOUR PICOMICs If your PicoMic are not already paired: AUDIO OUTPUT GAIN 1. Use the UP and DOWN keys to navigate to the MIC1 or MIC2 The right output level depends on your camera / SETTINGS MENU box showing"NO PAIRED MIC". recorder. Set it up at the highest level possible, You can set your mic as MIC1 or MIC2. but low enough so that your camera / recorder doesn‘t clip when you blow into the mic. 2. Click on the OK button, and follow the instructions. MICROPHONE OUTPUT MODE CAPSULE is here 1 _i TRS: output a stereo signal (L+R). Used for cameras, SET YOUR OUTPUT GAIN & oas recorders, etc. PICOMIC > 1. Set the audio gain on the camera / recorder to its lowest level. TRRS: mimick a headset microphone. This is useful STATUS LED Beause the pre—amps in many cameras perform poorly and have to record on a smartphone or a tablet. @ vic i high noise levels at high gains. Your PicoBase will use the right mode automatically. @ mic? Always connect the cable to your PicoBase Charging 2. Use the highest gain level on the PicoBase receiver (without first, then to your audio device. clipping) Else, the auto—detection might not work and PICOMIC f> Use the VU—meter on your camera or recorder to check if you clip your equipment might not detect that the when you blow into the mic. Set the highest gain on the PicoBase MAKE SURE TO CLIP YOUR PICOMIC PicoBase is connected. receiver which doesn‘t clip on your camera. Typical gains for DSLR THE RIGHT WAY: cameras are near —24dB. Note: once you have found the appropriate gain, do not change it to get more or less audio gain. Instead, depending on your sound environment, always use the Mic gain setting. TRS / TRRS AUDIO OUTPUT HEADPHONES WARRANTY INFORMATION PicoGear warrants thatthe sold products and accessories will be free from defects in materials and workmanship from a period of 1 year from the date of original purchase from a PicoGear—authorized supplier. THANK YOU This warranty is exclusively for the benefit of the original purchaser and is not assignable or transferable. If during the warranty period the product is shown to be defective, PicoGear may at its option replace the defective goods or repair them. The customer must notify PicoGear of any defect in the goods in writing prior to the expiry of the warranty periods set out above. The customer will be solely responsible for returning the goods to PicoGear or its authorized distributor. PicoGear will pay for the initial shipment of the defective goods for inspection. If upon inspection, the goods are found not to be defective, or if the warranty does not apply, the customer may have to pay for the shipping cost and inspection. If the warranty does apply, PicoGear will pay for the shipping back to the customer. PicoGear does not provide replacement goods or compensation during the shipping, inspection and repair of the goods. FOR YOUR PURCHASE The warranty applies only to defects in workmanship and does not cover defects caused by: 1. A failure to comply with the operating instructions provided by PicoGear. 2. Improper or negligent use. 3. Unauthorized repair or attempted repairs. 4. Tempering or modifications of the goods. 5. Normal wear and tear (including pits on the LCD glass}. 6. Exposure to any liquid or excessive heat (>70°C). 7. Connection to improper devices or power sources. OF A PICOGEAR PRODUCT 8. Damage caused by external devices. EXCEPT AS STATED IN THIS WARRANTY, PICOGEAR, IT‘S VENDORS, AGENTS, RESELLERS AND DISTRIBUTORS DISCLAIM IN THEIR ENTIRETY ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ALL WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE REMEDIES OUTLINED IN THIS WARRANTY ARE THE EXCLUSIVE REMEDY A CUSTOMER HAS ARISING FROM DEFECTIVE GOODS WHICH ARE SUBJECT TO THE WARRANTY, PICOGEAR DOES NOT WARRANT THAT THE GOODS WILL OPERATE IN A MANNER WHICH IS ERROR FREE, OR UNINTERRUPTED. SAFETY INSTRUCTIONS Contains small parts which may be a choking hazard. Not suitable for children under age 3. DO NOT expose this product to rain, liquids or moisture. DO NOT make unauthorized alterations to this product. Use this product only with an agency approved power supply which meats local regulatory requirements (e.g., UL, CSA, VDE, CCC). DO NOT expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire, oven, microwave, etc}. DO NOT apply excessive pressure on the product, DO NOT insert anything inside the product, DO NOT expose the product to any shock. YOU NOW OWN A TOP—OF—THE—RANGE Please dispose of used batteries properly, following local regulations. Do NOT incinerate. This product must not be used near people using any life—support device, such as pacemaker, implantable defibrillator, insulin pump, ete. It must not be used in hospitals. WIRELESS MICROPHONE SYSTEM, MADE This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natura E resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. mm Removal of the rechargeable lithium ion battery in this product should be conducted only by a qualified professional. FOR AUDIO & VIDEO PROFESSIONALS. REGULATORY INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. Prior to using this product, you must select your region in the Settings menu for regulatory complience. LEARN HOW TO USE IT NoOw! $J Changes or modifications not expressly approved by PicoGear could void the user‘s authority to operate this equipment. SUPPORT For FAQ, user manual and more information, please visit: ®ym® picogear.com/support


Document Created: 2019-04-05 23:28:48
Document Modified: 2019-04-05 23:28:48
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC