2AO5HWLAN-DONGLE_User Manual_20180720

FCC ID: 2AO5HWLAN-DONGLE

Users Manual

Download: PDF
FCCID_3933582

Panasonic Operation Manual Wireless LAN Dongle part No. DVOPM20105 panasonic * Thank you very much for purchasing the Panasonic product (STeTe) +Carefully read this operation manual prior to use the product correctly. +Always read "Cautions for Safety" prior to use * Store this operation manual carefully. * This equipmentis used only for the industrial purpose You cannot use in ordinary homes aSCF arTemen eenm®seaseics) Read operation manual for setup support software down— BXA ®s| DVOPM20105 loaded from our website prior to use [Panasonic Corporation Motor Business Unit Website] https //indlustrial. panasonic.com/ww/products/motors— compressors/fa—motors HEskk Hand over this operation manual to the end—user. (1) Republication of any part or all of this document B( ) ~ without permission is prohibited (2) Contents of this document are subject to change IMES8 — C28 — Z1016—0 without notice,

Cautions for safety Be sure to comply with. ■ Contents The following section explains the items that you page shall comply with to prevent dangers to humans and Cautions for safety ..................................................... E3 damage to properties. Requests to use Wireless LAN Dongle .................... E7 Application ........................................................................ E10 ■ This section explains the level of dangers and Listed contents on the website.......................................... E10 damages by the classification, which may occur 1. Introduction............................................................E11 when the wrong usage is carried out. When you unpacked ......................................................... E11 The content that Name of parts ................................................................... E12 “it may result in death Outline............................................................................... E13 DANGER or serious injury.” 2. Connection mode ................................................. E15 3. Connection............................................................ E17 The content that 4. Setting ................................................................... E18 WARNING “it may lead to death English 5. General Specifications......................................... E23 or serious injury.” 6. When you are in trouble....................................... E25 ■ Following pictographic symbol explains the content Guarantee.................................................................. E27 that you shall comply with. Precautions for use .................................................. E28 Federal Communication Commission Interference The content that you shall not Statement................................................................... E30 perform. After-sales service.................................................... E32 The content that you must execute. － E2 － － E3 －

Cautions for safety Be sure to comply with. DANGER WARNING Do not use the prod- Otherwise, it may uct in the place where Do not use the product cause problems to water may splash over, Otherwise, it may in an airplane. the safety of aircraft in the corrosive atmo- cause fire, electric operation. sphere or flammable shock, malfunction gas atmosphere or near or breakage. The electric wave the combustible ob- from the product jects. Do not use the product may have an effect in a hospital or a place on the electro-med- Do not install the prod- where an electro-medi- ical apparatus and uct near the heating ele- Otherwise, it may cal apparatus is placed. cause accident due ment such as a heater cause fire or mal- to the abnormal function. English or a large fixed wire- operation. wound resistor. If the installation Otherwise, the Do not use the product Install the product in place is not cor- electric wave may when there is a person the place with few dust rect, it may cause adversely affect the nearby who has a car- and water or oil is not electric shock, operation of pace- diac pacemaker. splashed over. fire, malfunction or maker. breakage. The electric wave Always check the safety Otherwise, it may from the product Do not use near the after the occurrence of cause electric may have an effect automatic control earthquakes. shock, injury or fire. on the automatic equipment such as an control equipment Ensure to install and set automatic door or a fire and cause accident the equipment so that Otherwise, it may alarm box. due to the abnor- fire, accident causing cause electric mal operation. injury or death does not shock, injury or fire. occur in earthquakes. － E4 － － E5 －

Cautions for safety Be sure to comply with. Requests to use Wireless LAN Dongle ◇ Frequency band for use Do not approach the equipment because the The product uses the frequency band of 2.4 GHz band, and equipment may oper- also other wireless equipment may use the same frequency. Otherwise, it may ate suddenly or the cause injuries. To prevent the radio wave interference with other wireless movement may change equipment, please use paying attention to the following terms. rapidly by changing the setting. Cautions to use Wireless LAN equipment The person who has a Otherwise, the In the frequency band for use of this equipment, the in-plant cardiac pacemaker electric wave may radio stations for the mobile identification which is used on shall keep the distance adversely affect the the manufacturing lines in factories (Radio station that needs 22 cm or more off the operation of pace- the license), specified low power radio stations (Radio station product. maker. that needs no license) and amateur radio stations (Radio station that needs the license) are operated in addition to the To discard this product, process as the industrial waste. industrial/scientific/medical equipment like microwave ovens. English 1. Check that the in-plant radio stations for the mobile identification, specified low power radio stations and amateur radio stations are not operated in the vicinity prior to use this equipment. 2. If the case of harmful radio wave interference occurred from this equipment to the in-plant radio stations for the mobile identification, immediately change the location or stop the use of electric wave and then contact to our company (Page E30) to have a talk about the action to the interference avoidance (e.g. the installation of partitions). 3. If you have any problem, for example; when the case of harmful radio wave interference occurred from this equipment to the in-plant radio stations for the mobile identification or the amateur radio stations, please contact to our company (Page E30). － E6 － － E7 －

Requests to use Wireless LAN Dongle (continued) ◇ Equipment qualification ・Do not use the product where magnetic field/static The product needs no license of radio stations because it electrical charge/radio disturbance occurs. has been approved for the certification of conformance to When you use the product near the following equipment, technical standards in accordance with the Radio Act. How- the communication may break up or the speed may be ever, it is prohibited to implement the following acts to the slow. product by the Radio Act. ・ Microwave oven ・To disassemble or remodel, ・Digital cordless telephone set ・To erase the nameplate attached to the side of product. ・Near the equipment that uses the electric wave of ◇ Usage restrictions 2.4 GHz band. Please note that there are following restrictions to use the Example; Equipment supporting Bluetooth, wireless product. audio apparatus or game machine. When those restrictions are not complied, we deny any li- Select the wireless broad band router (Access point) of ability for the incidental loss and damage raised by the use 802.11 n (2.4 GHz). Use the encryption scheme of “AES.” of the product or the unusable product. ・ Transmitting and receiving data by electric wave may English ・Use the product as the wireless LAN equipment. be intercepted. ・The product can be used only in the operational countries ・ To reduce the security risk of the interception of com- listed on our website. munications or illegal access, set the password for the ・ The product is designed to be able to operate in the coun- access point and PIN code to set for the driver so as try where the legal regulation standard is different. Set to be complicated containing the alphanumeric char- the country code corresponding to the country to use the acters. product because the specified country code has been ・You are required to set the country code. set at manufacturing. Please set the code with great care Please set with great care because it will be the violation because it will be the violation of law if you set the wrong of law if you set the wrong country code. country code. ・Do not connect to the wireless network which you have no authority of utilization. During automatic search in the wireless network circum- stances, a wireless network (SSID*) which you have no * It means the name to identify the specified network by wireless authority of utilization may be indicated. It may be deemed LAN. When this SSID is matched by mutual equipment, the as an illegal access. communication is enabled. － E8 － － E9 －

Requests to use Wireless LAN Dongle (continued) 1. Introduction Application When you unpacked * Is the product type correct by your order? The product is the dedicated device to our * Is there any broken part during transportation? servo driver. (You cannot use it by connecting to PC.) If you found any defective portion, please contact the retailer that you purchased the product. * For the servo driver you can connect with the product, terminals that can be connected by wireless, setup of the Type confirmation product and using method, check on Nameplate is attached to the side of product. our website; https: /industrial.panasonic.com/ww/products/ motors—compressors/fa—motors _ l Panasonic ysyBu3 W When there is a person nearby who uses a pacemaker or you cannot use the wireless LAN, please use the communi— cation cable (Use USB mini—B connector for the driver, and Part No P1s040001 select a proper connector according to specification of the Serial Number cumt m 2orepr2s04 terminal.}. Example: P 1604000 1 Panasonio Corporation 1 Sequential number Listed contents on the website Manufacturing month * List of servo drivers possible to connect Manufacturing year (Last wo digits of the Christian year) * List of functions available in the wireless communications + Operating procedure manual of the setup support software + Countries where you can use the product. + Supported wireless authentication standards * Specifications of the recommended terminals * Specifications of the recommendedaccess points — E10 — — EM —

1. Introduction (continued) Name of parts Wireless LAN Dongle This product is the wireless LAN dongle which enables the wireless connection between the servo driver and your ter— minals (PC, smartphones, tablet type terminals) by connect— Lamp Connector ing to the servo driver. When you use the Windows OS ap— (Blue LED) l s— plicable setup support software "PANATERMor the iPhone terminals and Android terminals applicable setup support software "Panasonic Motor Setup App,"it is required to con— nect your PC and servo driver with cables, but the wireless system will be possible by using this product. The lamp shows the state of product when itis connected to the servo driver. * Lights on: ysibug The state when the power is supplied to the product but it is not communicating with the application. (Standby state) * Low speed blinking (Light off 1 sec. Light on 1 sec.): The state when communicating with the application. (Communicating state) * High speed blinking (Light off 0.1 sec. Light on 0.1 sec.): The state when the product failed to initialize and cannot communicate. (Brror state) By using this product and setup support software, primarily * Lights off: the following items will be realized in wireless communica— The state when the power is not supplied to the product. tion. (Non—energized state) * Edition of parameters for the servo driver * Monitoring the operation and inner conditions * Monitoring and clearing the alarm — E12 — — E13 —

1. Introduction (continued) 2. Connection mode However, you cannot use the product in the wireless com— You can use the STA mode (Station mode) with the product. munication for the function to drive the motor, such as com— * STA mode (Station mode) missioning or frequency characteristics measurement. This is the mode that this product operates as a station Since the function which is available varies depending on (Wireless LAN adapter) and communicates with the terminal the using application, refer to the instruction manual of each via the equipment that operates as an access point (Wireless setup support software listed on the website for details. LAN access point). When you connect in this mode, please The product cannot be connected to the Internet. separately prepare the equipment which operates as an ac— * iPhone is the trademark of Apple Inc. registered in the cess point. In addition, change the network setting of the ter— minal and internal parameters in the driver so as to connect United States and other countries. The trademark of with the prepared access point. iPhone is used based on the license of Aiphone Co., Ltd. In this mode, all the products in the same local area network + Android is the trademark or the registered trademark of can be selected from the terminal. Google Inc. * Windows is the registered trademark or the trademark of . ysbug Microsoft Corporation in the United States and other coun— tries. + You can download "PANATERM" applicable to Windows OS from our website. 4 + You can download "Panasonic Motor Setup App" appli— Access point cable to iPhone terminals from App Store. hq + For "Panasonic Motor Setup App" applicable to Android terminals, the smartphone version and tablet version are available. You can download cither one from Google Play. — E14 — — E15 —

2. Connection mode (continued) 3. Connection The access point to be prepared shall satisfy all the fol— Connect the product to the connector X1 of the servo driver. lowing specifications. If the following specifications are not When servo driver is connected by wireless for the first time, satisfied, change the access point setting or prepare other initial setup is necessary. Refer to "4. Setting" for details. access point. * The wireless communication standard supports either IEEE 802 11 n, g or b. Connector X1 * The security protocol supports either WPA or WPA2. * Use 24 GHz band as the frequency range (5 GHz band is prohibited to use). + Communications between terminals located in the same local area is permitted. For recommended access points, please check them on our website. Do not hook or place other wiring on the main body of product. fi; ‘“H“I Wireless LAN Dongle Cable }“I;:/ — E16 — — E17 —

4. Setting The servo driver has the parameter for setting the wireless 2. Start up the setup support software to start the communi— LAN communications as the internal parameters. Before cations with the driver. starting the wireless communications with the product, it is 3. Set the following parameters on the "Wireless LAN/Driver required to set (Initial setup) the parameters for wireless Information Setting" screen of the setup support software LAN communications by the use of USB communication. and then write those parameters in EEPROM of driver. The following section shows the initial setup method. For the initial setup, you need to install the setup support software, and at the same time the terminal (ie. Windows PC or An— droid terminal) that can use the USB communication and a Select cither WPA or WPA2 Security Select to match the setting of Default: WPA USB mini—B cable is required. the terminal and access point. [£] Initial setup (Wired connection) Select the country to use the 1. Connect the servo driver and terminal with the USB mini— product. Please set with great B cable. Sg;;luy care because it will be the Defoult: JP Use a USB mini—B type in the marketplace as the driver violation of law if you set the jul side connector. Select the terminal side connector to wrong country code. S. match to the specifications of the terminal. C Match to SSID of the access point to be connected Connector X1 -l USB mini—8 Settable number of characters: Default cable SSID 1 to 32 characters Panasonic (Prepare a cable) Accepted characters: Servo000 on the market half—width characters 0 to 9, a to z, Ato Z, — _ Connector X1 -l USB mini—B cable (Prepare a cable on the market Android ter;mna\ — E18 — — E19 —

4. Setting (continued) Item Description Remarks Item Description Remarks Match to the password of the Set the PIN code which is re- access point to be connected. quired when the setup support Settable number of characters: software is used by wireless Default: connection. PWD 8 to 32 characters (*) Panasonic Accepted characters: At the start of wireless commu- Servo000 nication, the function cannot half-width characters 0 to 9, a to z, A to Z, -, _, !, @, #, $, be used by wireless communi- %, ^, *, ,, ., / cation if the PIN code set here is not input. Default: When it is set valid, the IP ad- PIN code Also, the function cannot be Not set up dresses are automatically as- used by wireless communica- signed from the access point. tion if the PIN code has not DHCP Default: Valid When it is set invalid, you are been set. required to set the IP address Settable number of characters: English manually. 8 characters (*) Accepted characters: Set only when half-width characters 0 to 9, Set the IP address to be used DHCP is invalid IP address a to z, A to Z when DHCP is invalid. Default: 192.168.0.1 Set the driver nickname which is indicated on the setup sup- Set only when port software. Default: Subnet Set the subnet mask to be DHCP is invalid Driver NoName Settable number of characters: mask used when DHCP is invalid. Default: nickname 1 to 8 characters Setting is 255.255.255.0 Accepted characters: voluntary. half-width characters 0 to 9, Set only when a to z, A to Z, -, _ Default Set the default gateway to be DHCP is invalid * To ensure the safety on the security, set the password and gateway used when DHCP is invalid. Default: PIN code for the access point in the long and complicated 192.168.0.1 character string as much as possible. － E20 － － E21 －

4. Setting (continued) 5. General Specifications 4. Turn off the power supply: of driver. The initial setup is now completed. Power DC 5V (Supplied from USB) 500 mA supply Next, establish the wireless system between the terminal and driver by using the product. Power consumption 0| mMax.2500 mW C 1. Turn on the power supply ofaccess point. 2. Connectthe product to the connector XI of the driver. 3. Turn on the power supply of driver and check that the Outline lamp of the product lights up. dimensions 4. Change the network setting of the terminal you want to use and connect to the target access point. 5. Use the terminal to start up the setup support software. Urit: mm 6. When. the communication with the product has been suc— felere] ceeded, the nickname, part number and serial number of Weight Appr 4g the corresponding driver will be displayed on the driver select screen. . Temperature for use: Ambient 7. When. the driver is selected which is the target to connect, mhie 0 °C — 55 °C (Shall be no freeze} temperature the entry of PIN code willbe requested, and so enter the for use Temperature for storage: PIN code you set at the initial setup. —20 °C — 65 °C (Shall be no condensation) 8. When the correct PIN code is input, the main screen of the setup support software will open. ::ln'::::“ for 20 % —85 % XH both for use and storage ty (Shall be no condensation} Afterward, parameter setting or status monitoring can be use carried out by wireless communications by using the setup support software. Interface USB mini—B For the method to use the setup support software, sepa— rately refer to the operating manual of each setup support Standard Conformable to IEEE802, 11b/IEEESO2. software. andards 11g/[EEE802. 11n — E22 — — E23 —

5. General Specifications (continued) 6. When you are in trouble Q. I connected the product to the driver and then turned on Frequency the power supply but the lamp of the product does not range/Chan- 2.412 GHz – 2.462 GHz light up (Power is not supplied). Or the lamp immediately nels (Center 1 – 11 ch lights off. frequency) A. The servo driver may not support the product. For the Data transfer supported servo drivers, please check them on our web- IEEE802.11b: Max.11 Mbps speed site. IEEE802.11g: Max.54 Mbps (Value of standard *1) IEEE802.11n: Max.72.2 Mbps Q. The lamp of the product blinks at a high speed and the communication is impossible. Access A. The servo driver fails to read the parameters for setting Infrastructure mode system wireless communications. Contact failure with the con- nector X1 may have occurred, therefore, reinsert the WPA-PSK (TKIP/AES) Security product and then turn on the power supply again. /WPA2-PSK (TKIP/AES) English When the syndrome is not improved even if the above Max. trans- action was taken, the servo driver may not be supported mission Indoors: Appr. 20 m (Varies depending on in the system. Please check the supported servo drivers distance the installation circumstances) on our website. (Prospect) Q. The lamp of the product lights up, but the communication * １ This is the theoretical speed and the actual communica- is impossible. tion speed differs due to the usage circumstances or the A. Communication setting may be wrong. First of all, check connected equipment. the wireless LAN/driver parameter setting of the servo driver and check whether the SSID/password of the access point and parameter setting of the driver are matched, and whether the security protocol satisfies the setting of access point. Check if the same IP address as other equipment has been set when DHCP is set invalid and the IP address is set manually. － E24 － － E25 －

6. When you are in trouble (continued) Guarantee However, if the situation is not still improved, check Guarantee period whether the network setting of the terminal is set to con- ● The guarantee period of the product shall be one year nect to the target access point. Also check that the access point is in accordance with after your purchase or one year and six months after our manufacturing month. the specifications for access point as described before. Q. Wireless communication breaks up during communica- Guarantee description tions. ● We will replace the product without charge when a failure A. The wireless communication circumstances may be in occurred in the guarantee period in the normal use the interference. Check if the situation can be improved situation in accordance with this operation manual. by the method to change the communication channel or However, the following cases shall be charged even if it is eliminate the interference of communications after stop- in the guarantee period. ping the wireless communication of other equipment. (1) Failures caused by the wrong usage method and Electric wave may be blocked off by obstacles. Since the improper repair or remodeling. English metal has property difficult to transmit the electric wave (2) Failures caused by the fall after the purchase and in particular, the wireless communication may be impos- damages during the transportation. sible if the circumstances are covered by metal. (3) Failures caused because the product is used beyond the scope of specifications. (4) Failures caused by fire, earthquake, lightning strike, wind and flood, brine damage, abnormal voltage or other Acts of God and disasters. (5) Failures caused by the intrusion of water, oil, metal fragments or other foreign matters. ● The scope of the guarantee shall be only for the delivered product unit. The damage induced by the failure of the delivered product shall be out of the scope. － E26 － － E27 －

Precautions for use ● Cautions to export the product or the equipment installed the cause that the far distance between the product and with the product. access point or the access point and terminal, communi- When the final user or the final application of the product cation interception by obstacles such as the metal which is involved in the military affair or weapons, make sure to blocks electric waves, failure of the terminal or access take the sufficient probation and required export proce- points. When the communication breaks out, please check dures because the situation may be subject to the export the using wireless communication circumstances and the control regulated by the “Foreign Exchange and Foreign condition of using terminals and access points. Trade Control Law.” ● Since this product uses radio wave and it may generate ● The product is manufactured only aiming at the use for unexpected actions by the delay until the result is reflected general industrial products but not designed or manufac- actually on the movement of equipment when the setting tured for the purpose to be used with the equipment or the change is carried out, please check there are no people system involving human lives. around the site when the setting is changed and please ● The specialist who has the knowledge shall perform deal- take it into consideration to ensure the safety. ing with the product such as the installation, wiring, opera- ● Smoke of a cigarette may be generated depending on the tion, maintenance and inspection. content of failure of the product. Give consideration to it ● To apply to the facility where the occurrence of serious when the product is used in a clean room. English accident or damage is forecasted due to the failure of the ● When the product is used in the environment where the product, make sure to install the safety device. concentration of sulfur or sulfide-based gas (H2S, SO2, ● If you conduct a study on the use of product in the special NO2, Cl2 etc) is high, please take the conditions into ac- circumstances as for the nuclear energy control, aero- count because the disconnection of chip resistor or bad space instruments, transport facilities, medical equipment, contact of contacts by the sulfurization may occur. various safety devices and equipment that demands the ● For the matching of structure, dimensions, lifespan, char- cleanness class, please contact us. acteristics and laws and regulations with the installing ● We make our maximum effort to ensure the quality of the equipment and parts, or the matching when the specifica- product, however, please take it into consideration to es- tion of installing equipment is changed, please make the tablish your fail safe design and ensure the safety in the final decision by the customer. operable range at the operation place because the product ● We cannot guarantee the use beyond the scope of speci- may generate unexpected actions caused by the loading fications of the product. Please use the product with great of external noise or static electrical charge exceeding ex- care. pectation or the possible failure of the input power source, ● A part may be partially changed to improve the perfor- wiring or parts. mance. ● The wireless communications may break out and the func- ● Do not disassemble or remodel the product because it is tion may not be accomplished normally due to the inter- prohibited by the Radio Act. ference in the wireless communication circumstances or － E28 － － E29 －

Federal Communication Commission Interference Statement ● This device complies with Part 15 of the FCC Rules. Operation ● This transmitter must not be co-located or operating in is subject to the following two conditions: (1) This device may conjunction with any other antenna or transmitter. not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ● Radiation Exposure Statement: ● This equipment has been tested and found to comply with the The product comply with the FCC portable RF exposure limit set limits for a Class B digital device, pursuant to Part 15 of the forth for an uncontrolled environment and are safe for intended FCC Rules. These limits are designed to provide reasonable operation as described in this manual. The further RF exposure protection against harmful interference in a residential reduction can be achieved if the product can be kept as far as installation. This equipment generates, uses and can radiate radio possible from the user body or set the device to lower output frequency energy and, if not installed and used in accordance power if such function is available. with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. ● FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. － E30 － － E31－

After-sales service MEMO Repair. • Consult to a dealer from whom you have purchased the product for details of repair. Wh e n th e p ro d u ct i s i n co rp o ra te d to th e machi ne or equipment you have p urchased , consult to the manufacturer or the dealer of the machine or equipment. Technical information • Technical informatio n of this produ ct (Operating Instructions, CAD data, Inquiries) can be downloaded from the following web site. https://industrial.panasonic.com/ww/products/motors- compressors/fa-motors English ■ Convenient note (Write in for your inquiry or repair.) Date of Part No. DV0PM20105 purchase Purchase store name Phone:（ ） － IME98 － E32 － Z1016-0

パナソニック株式会社 モータビジネスユニット 〒 574-0044 大阪府大東市諸福７丁目１番１号 電話（代表）（072）871-1212 松下电器产业株式会社 马达经营单位 日本大阪府大东市诸福 7 丁目 1 番 1 号 邮编 574-0044 电话 +81-72-871-1212（总机） Motor Business Unit, Panasonic Corporation 7-1-1 Morofuku, Daito City, Osaka, 574-0044, Japan Phone : +81-72-871-1212 制造商 ：珠海松下马达有限公司 中国广东省珠海市南屏科技工业园屏东 3 路 3 号 原产地 ：中国 © Panasonic Corporation 2016 Printed in China IME98 Z1016-0


Document Created: 2018-07-19 20:28:59
Document Modified: 2018-07-19 20:28:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC