RF Exposure

FCC ID: 2AO3C-M1BT

RF Exposure Info

Download: PDF
FCCID_4475112

MPE REPORT FCC ID: 2AO3C-M1BT Date of issue: July 15, 2019 Report number: MTi180731E184 Sample description: RADIO Model(s): MODEL ONE BT Applicant: Tivoli Audio, Inc. Address: 745 Atlantic Avenue Boston, MA 02111 USA Date of test: July 13, 2018 to Nov. 21, 2018 Shenzhen Microtest Co., Ltd. http://www.mtitest.com This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen Microtest Co., Ltd. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 2 of 4 - Report No.: MTi180731E184 TEST RESULT CERTIFICATION Applicant’s name: Tivoli Audio, Inc. Address: 745 Atlantic Avenue Boston, MA 02111 USA Manufacture's name: Jwoodaudio Industry Co., Ltd Address: No.4 industrial District, Liuwu village, Yuanzhou Town, Huizhou City,Guangdong province, P.R.C 516123 Product name: RADIO Trademark: Tivoli Audio Model and/or type reference . : MODEL ONE BT Serial model ........................... : N/A RF exposure procedures........ : KDB 447498 D01 v06 This device described above has been tested by Shenzhen Microtest Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Tested by: Leo Su Nov. 21, 2018 Reviewed by: Blue Zheng July 15, 2019 Approved by: Smith Chen July 15, 2019 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 3 of 4 - Report No.: MTi180731E184 RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) MPE Calculation Method Friis transmission formula: Pd= (Pout*G)\ (4*pi*R2) Where Pd= Power density in mW/cm2 Pout=output power to antenna in mW G= Numeric gain of the antenna relative to isotropic antenna Pi=3.1415926 R= distance between observation point and center of the radiator in cm(20cm) Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 4 of 4 - Report No.: MTi180731E184 Measurement Result BT: Operation Frequency: BT GFSK, π/4-DQPSK, 8DPSK: 2402-2480MHz Power density limited: 1mW/ cm2 Antenna Type: BT Antenna: PCB Antenna; BT antenna gain: 1dBi R=20cm mW=10^(dBm/10) antenna gain Numeric=10^(dBi/10)= 10^(1/10)=1.26 Power conducted Evaluation Tune- Max Antenna density Channel power result up Limits Freq. modulation power tune-up (MHz) Gain (dBm) (dBm) power (mW/cm2 ) (mW/cm2) (dBm) (mW) (dBi) Numeric 2402 0.906 1±1 2 1.585 1.00 1.26 0.0004 1 2441 GFSK 0.995 1±1 2 1.585 1.00 1.26 0.0004 1 2480 1.766 1±1 2 1.585 1.00 1.26 0.0004 1 2402 0.805 1±1 2 1.585 1.00 1.26 0.0004 1 π/4- 2441 1.698 1±1 2 1.585 1.00 1.26 0.0004 1 DQPSK 2480 1.902 1±1 2 1.585 1.00 1.26 0.0004 1 2402 1.302 2±1 3 1.995 1.00 1.26 0.0005 1 2441 8DPSK 2.197 2±1 3 1.995 1.00 1.26 0.0005 1 2480 2.696 2±1 3 1.995 1.00 1.26 0.0005 1 Conclusion: For the max result: 0.0005≤ 1.0 for 1g SAR, No SAR is required. ----END OF REPORT---- Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China


Document Created: 2019-10-09 09:42:51
Document Modified: 2019-10-09 09:42:51
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC