Test Report

FCC ID: 2AO23QI1019R

Test Report

Download: PDF
FCCID_4312799

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 1 of 33 TEST REPORT Application No.: SZEM1905013795CR Applicant: Chug, Inc. Address of Applicant: 7157 Shady Oak Road, Eden Prairie, Washington, Minnesota, 55344, United States. Manufacturer: Shenzhen PYS Industrial Co., LTD Address of Manufacturer: No.9 LianHua Industrial Zone, Longyuan Road, Longhua Street, Longhua District, Shenzhen, Guangdong, China. Factory: Shenzhen PYS Industrial Co., LTD Address of Factory: No.9 LianHua Industrial Zone, Longyuan Road, Longhua Street, Longhua District, Shenzhen, Guangdong, China. Equipment Under Test (EUT): EUT Name: Wireless Charging Pad Model No.: IH-QI1019R Trade mark: SHUTTERFLY, GEMS FCC ID: 2AO23QI1019R Standard(s) : 47 CFR Part 15, Subpart C Date of Receipt: 2019-05-10 Date of Test: 2019-05-10 to 2019-05-20 Date of Issue: 2019-05-21 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Keny Xu EMC Laboratory Manager

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 2 of 33 Revision Record Version Chapter Date Modifier Remark 01 2019-05-21 Original Authorized for issue by: Powell Bao /Project Engineer Eric Fu /Reviewer

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 3 of 33 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result 47 CFR Part 15, 47 CFR Part 15, Subpart Antenna Requirement N/A Pass Subpart C C 15.203 Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions 47 CFR Part 15, ANSI C63.10 (2013) 47 CFR Part 15, Subpart at AC Power Line Pass Subpart C Section 6.2 C 15.207 (150kHz-30MHz) 47 CFR Part 15, ANSI C63.10 (2013) 47 CFR Part 15, Subpart 20dB Bandwidth Pass Subpart C Section 6.9.2 C 15.215 47 CFR Part 15, ANSI C63.10 (2013) 47 CFR Part 15, Subpart Restricted Bands Pass Subpart C Section 6.10.5 C 15.205 Radiated Emissions 47 CFR Part 15, ANSI C63.10 (2013) 47 CFR Part 15, Subpart Pass (9kHz-30MHz) Subpart C Section 6.4 C 15. 205 & 15.209 Radiated Emissions 47 CFR Part 15, ANSI C63.10 (2013) 47 CFR Part 15, Subpart Pass (30MHz-1GHz) Subpart C Section 6.5 C 15. 205 & 15.209

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 4 of 33 3 Contents Page COVER PAGE ... ... c nnememenenenenrenrererererenreererereereereereereereereereereereereereereereereereernernennennennennnnnnnnn en 1 TEST SUMMARY ... ... .cc ccnenneeneeneereereereereereereerereereereereereereereereereereereereereereereereeneeneeneeneennennennennennennennennen 3 CONTENTS .. ... en en emeeeeeeerreererrerreereereereereereenereereereereereereereernereereereereereereereereereereernennernennennennennnnnnnnn en 4 GENERAL INFORMATION ... ... ... .000 00000meeeerrerrerrerrerreereereereereereereereereereereereereereereernernernennennennennennnnnn 6 4.1 DetaAiLs oF E.U.T.. .6 4.2 DescRirtion or Suppont Units.. .6 4.3 MEASUREMENT UNCERTAINTY . «.7 4.4 TEST LOCATION .......ccccccccclkll. .. 8 4.5 TEST FAGILITY «sc .. 8 4.6 DEvIATION FROM STANDARDS . .. 8 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ... . ... ... 00. 0 000000 eee en en n en neereereereereenevrevnevnevnevnevnevnevnev nc n 8 EQUIPMENT LIST ... ... c00000memeeeeerererrerrerreeerrererererereereereereereereereereereereereereereereereereeneennennennennnnnnnns 9 RADIO SPECTRUM TECHNICAL REQUIREMENT ...... ... c0000emeeeeeeeeeeereerereerereereereereereereernennnnes 12 6.1 ANTENNA REQUIREMENT ... .0. 00.00000 00000 en e e e e e e reereerernernernernernernernevnernevnevnevnevnevnevnevnevnecnecne 12 6.1.1 Test Requirement: ... 12 6.1.2 Conclusion......... .12 RADIO SPECTRUM MATTER TEST RESULTS ... 13 7.1 Conpuctep Emissions at AC Powenr LingE (150KkHz—30MHz) ... .13 7.1.1 E.U.T. OD&@FANOM...........cccceeereermermerernernernernernernerererrenee .... 14 7.1.2 Test Setup Diagram ... .... 14 7.1.3 Measurement Procedure and Data .... 14 7.2 200B BANDWIDTH ..... maré 7,2.1 E.U.T. Operation 2. 47 7,2.2 Test Setup Diagram ... ... 17 7.2.3 Measurement Procedure and Data 2. 47 7.3 RestRictED Banps ... «...19 7.8.1 E.U.T. Operation. .20 7.3.2 Test Setup Diagram. .20 7.3.3 Measurement Procedure and Data .20 7.4 RapiaTED EMissions (9KHz—30MHz) . .23 7.4.1 E.U.T. Operation... .24 7.4.2 Test Setup Diagram. .24 7.4.3 Measurement Procedure and Data .24 7.5 RapiatED Emissions (3OMHz—1GHz) .27 7.5.1 E.U.T. Operation... .28 7.5.2 Test Setup Diagram. .28 7.5.3 Measurement Procedure and Data... ...29 PHOTOGRAPHS . ... ... ... nn00mmeeeererrerrerreereeerrereereereereereereereereereereereereereereereereereernernernennennennennennennnnnn 33 8.1 TEST SETUP .. .20 en en eee en en en en en en en en eereneeneereereeneeneereeneeneeneeneeneeneeneeneeneeneeneeneeneeneeneeneeneeneeneeneee 33 Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed overieaf, available on request or accessible at hitp:/Iwaw. sgs.com/en/Terms—and—Conditions.aspx and. for electronic format documents, subject io Terms and Conditons for bleattontemwn.ags. Documents at hip; comfent Terms:ang:conditionsyTerms—0.Bocument aapx. Attention is drawn to the limitation of liability, ndemnification and Jurisdiction Issues defined therein. Any holder of this document is advised that information contained hereon reflacts the Company‘s tindings at the time of its intervention only and within the !imits of Client‘s instructions, if any. The Company‘s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced exeept in full. without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the contant or t appearance of this doctment is unlawlul and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the spectond Testng Sevices results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. ‘ Aftention: To check the authenticity of testing /inspection report & certificate, please contact us at telephone: (86—755) 8307 1443 > or email: CN.Doccheck@sas.com No.t Worishop, N10 Médl Secton, Scence &Technology Pat, Shonthen, China 518057 t (B6—758)26012058 1 (86—755) 28710504 wnnsgeqroup.com.en Olabwaby *B —20l— ARBRENM—108—STB ABS: steosr t (86—755) 26012053 1 (66—755)26710504 sgs.ctina@sgs.com t Member of the SGS Group (SGS SA)

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 5 of 33 8.2 EUT ConstRuctionaL DetaiLs (EUT PHoTOS) .. Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed overieaf, available on request or accessible at hitp:/Iwaw. sgs.com/en/Terms—and—Conditions.aspx and. for electronic format documents, subject io Terms and Conditons for bleattontemwn.ags. Documents at hip; comfent Terms:ang:conditionsyTerms—0.Bocumentaapx. Attention is drawn to the limitation of liability, ndemnification and Jurisdiction Issues defined therein. Any holder of this document is advised that information contained hereon reflacts the Company‘s tindings at the time of its intervention only and within the !imits of Client‘s instructions, if any. The Company‘s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced excent in full, tithout prior wtten appraval of ihe company, Any unauithorized alteration. forgery or falsification of the conte\,of appearance of this document is unlawful and offendars may be prosecuted to the fullest extent the law. Unless otherwiso stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Aftention: To check the authonticity of testing /inspestion report & certificate, please contact us at tdisphdne: (e0—755) saor 1aa3, N.Doccheck@sas.c C a a Jt No|kashcp‘M10 Middle Secion Scnem&TecMo\ogyPak Shenzhen, China 518057 t (86—755) 26012058 f (86—786) 26710504 wnnw.sgogroup.com.en aboatory *B —20l— ARBRENM—108—ST B ABS: steosr t (86—755)26012053 f (66—755)26710504 sgs.china@sgs.com T Member of the SGS Group (SGS SA)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 6 of 33 4 General Information 4.1 Details of E.U.T. Power Supply: Input: DC5V, 2A; DC9V,1.67A Output: 5W,7.5W,10W Cable: USB cable(Unshielded, 187cm) Antenna Type: Loop Antenna Antenna Gain: 0dBi Modulation Type: Load Modulation Operation Frequency: 110.66kHz to 205.43kHz Remark: Tests were conducted in all three load modes and the worst case 10W is reported only. 4.2 Description of Support Units Description Manufacturer Model No. Serial No. iPhone 8 Apple A1863 F4GVQ656JC6D S2D7N191240141 Mobile Phone HUAWEI LYA-AL00 16 Mobile Phone SAMSUNG SM-G9500 R28J9140LPB CD122 Adapter UGREEN Input:AC100-240V,50/60Hz, 500mA N/A (Provided by client) Output: DC5V,3A; DC9V,2A; DC12V,1.5A

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 7 of 33 4.3 Measurement Uncertainty No. Item Measurement Uncertainty 1 Radio Frequency ± 7.25 x 10-8 2 Conduction Emission ± 3.0dB (150kHz to 30MHz) 3 Occupied Bandwidth ± 3% ± 4.5dB (Below 1GHz) 8 Radiated Spurious emission test ± 4.8dB (Above 1GHz) 9 Temperature test ± 1°C 10 Humidity test ± 3% 11 Supply voltages ± 1.5% 12 Time ± 3%

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 8 of 33 4.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 4.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. 4.6 Deviation from Standards None 4.7 Abnormalities from Standard Conditions None

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 9 of 33 5 Equipment List Conducted Emissions at AC Power Line (150kHz-30MHz) Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room ZhongYu Electron GB-88 SEM001-06 2017-05-10 2020-05-09 Measurement Software AUDIX e3 V5.4.1221d N/A N/A N/A Coaxial Cable SGS N/A SEM024-01 2018-07-12 2019-07-11 LISN Rohde & Schwarz ENV216 SEM007-01 2018-09-25 2019-09-24 LISN ETS-LINDGREN 3816/2 SEM007-02 2019-04-01 2020-03-31 EMI Test Receiver Rohde & Schwarz ESCI SEM004-02 2019-04-01 2020-03-31 20dB Bandwidth Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date DC Power Supply ZhaoXin RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSP SEM004-06 2018-09-27 2019-09-26 JS1120-2 Measurement Software JS Tonscend N/A N/A N/A BT/WIFI V2. Coaxial Cable SGS N/A SEM031-02 2018-07-12 2019-07-11 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz NRVS SEM014-02 2018-09-25 2019-09-24 Restricted Bands Measurement Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date DC Power Supply ZhaoXin RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSP SEM004-06 2018-09-27 2019-09-26 JS1120-2 Measurement Software JS Tonscend N/A N/A N/A BT/WIFI V2. Coaxial Cable SGS N/A SEM031-02 2018-07-12 2019-07-11 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz NRVS SEM014-02 2018-09-25 2019-09-24 Radiated Emissions (9kHz-30MHz) Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date 10m Semi-Anechoic SAEMC FSAC1018 SEM001-03 2018-03-31 2021-03-30 Chamber e3 V8.2014-6- Measurement Software AUDIX N/A N/A N/A 27 Coaxial Cable SGS N/A SEM029-01 2018-07-12 2019-07-11

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 10 of 33 EMI Test Receiver Rohde & Schwarz ESR SEM004-03 2019-04-01 2020-03-31 (9kHz-7GHz) Trilog-Broadband Schwarzbeck VULB9168 SEM003-18 2016-06-29 2019-06-28 Antenna(30MHz-1GHz) Sonoma Instrument Pre-amplifier 310N SEM005-04 2019-04-12 2020-04-11 Co Active Loop Antenna ETS-Lindgren 6502 SEM003-08 2017-08-22 2020-08-21 Radiated Emissions (30MHz-1GHz) Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date 10m Semi-Anechoic SAEMC FSAC1018 SEM001-03 2018-03-31 2021-03-30 Chamber e3 V8.2014-6- Measurement Software AUDIX N/A N/A N/A 27 Coaxial Cable SGS N/A SEM029-01 2018-07-12 2019-07-11 EMI Test Receiver Rohde & Schwarz ESR SEM004-03 2019-04-01 2020-03-31 (9kHz-7GHz) Trilog-Broadband Antenna Schwarzbeck VULB9168 SEM003-18 2016-06-29 2019-06-28 (30MHz-1GHz) Sonoma Instrument Pre-amplifier 310N SEM005-04 2019-04-12 2020-04-11 Co Active Loop Antenna ETS-Lindgren 6502 SEM003-08 2017-08-22 2020-08-21

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 11 of 33 General used equipment Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shanghai Humidity/ Temperature Meteorological ZJ1-2B SEM002-03 2018-09-27 2019-09-26 Indicator Industry Factory Shanghai Humidity/ Temperature Meteorological ZJ1-2B SEM002-04 2018-09-27 2019-09-26 Indicator Industry Factory Humidity/ Temperature Mingle N/A SEM002-08 2018-09-27 2019-09-26 Indicator Changchun Barometer Meteorological DYM3 SEM002-01 2019-04-04 2020-04-03 Industry Factory

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 12 of 33 6 Radio Spectrum Technical Requirement 6.1 Antenna Requirement 6.1.1 Test Requirement: 47 CFR Part 15, Subpart C 15.203 6.1.2 Conclusion Standard Requirement: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit permanently attached antenna or of an so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. EUT Antenna: The antenna is integrated on the main PCB and no consideration of replacement. The best case gain of the antenna is 0dBi. Antenna location: Refer to Appendix(Internal photos)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 13 of 33 7 Radio Spectrum Matter Test Results 7.1 Conducted Emissions at AC Power Line (150kHz-30MHz) Test Requirement 47 CFR Part 15, Subpart C 15.207 Test Method: ANSI C63.10 (2013) Section 6.2 Limit: Conducted limit(dBμV) Frequency of emission(MHz) Quasi-peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 *Decreases with the logarithm of the frequency.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 14 of 33 7.1.1 E.U.T. Operation Operating Environment: Temperature: 25 °C Humidity: 51 % RH Atmospheric Pressure: 1005 mbar Pretest these a:Charge mode_Keep the EUT charging(5W) modes to find b:Charge mode_Keep the EUT charging(7.5W) the worst case: c:Charge mode_Keep the EUT charging(10W) The worst case c:Charge mode_Keep the EUT charging(10W) for final test: 7.1.2 Test Setup Diagram 7.1.3 Measurement Procedure and Data 1) The mains terminal disturbance voltage test was conducted in a shielded room. 2) The EUT was connected to AC power source through a LISN 1 (Line Impedance Stabilization Network) which provides a 50ohm/50μH + 5ohm linear impedance. The power cables of all other units of the EUT were connected to a second LISN 2, which was bonded to the ground reference plane in the same way as the LISN 1 for the unit being measured. A multiple socket outlet strip was used to connect multiple power cables to a single LISN provided the rating of the LISN was not exceeded. 3) The tabletop EUT was placed upon a non-metallic table 0.8m above the ground reference plane. And for floor-standing arrangement, the EUT was placed on the horizontal ground reference plane, 4) The test was performed with a vertical ground reference plane. The rear of the EUT shall be 0.4 m from the vertical ground reference plane. The vertical ground reference plane was bonded to the horizontal ground reference plane. The LISN 1 was placed 0.8 m from the boundary of the unit under test and bonded to a ground reference plane for LISNs mounted on top of the ground reference plane. This distance was between the closest points of the LISN 1 and the EUT. All other units of the EUT and associated equipment was at least 0.8 m from the LISN 2. 5) In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed according to ANSI C63.10 on conducted measurement. Remark: LISN=Read Level+ Cable Loss+ LISN Factor

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 15 of 33 Mode:c; Line:Live Line

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 16 of 33 Mode:c; Line:Neutral Line

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 17 of 33 7.2 20dB Bandwidth Test Requirement 47 CFR Part 15, Subpart C 15.237(b) Test Method: ANSI C63.10 (2013) Section 6.9.2 Limit: N/A 7.2.1 E.U.T. Operation Operating Environment: Temperature: 23 °C Humidity: 53 % RH Atmospheric Pressure: 1005 mbar Pretest these a:Charge mode_Keep the EUT charging(5W) modes to find b:Charge mode_Keep the EUT charging(7.5W) the worst case: c:Charge mode_Keep the EUT charging(10W) The worst case c:Charge mode_Keep the EUT charging(10W) for final test: 7.2.2 Test Setup Diagram 7.2.3 Measurement Procedure and Data Test Frequency(KHz) 20dB bandwidth (KHz) Limit (KHz) Results 111.66 0.262 N/A Pass

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 18 of 33 * RBW 100 Hz Marker 1 [T1 ] * VBW 300 Hz -23.11 dBm Ref -10 dBm * Att 10 dB SWT 120 ms 111.660000000 kHz -10 ndB [T1] 20.00 dB BW 262.000000000 Hz Temp 1 [T1 ndB] A -20 1 -43.13 dBm 1 PK 111.529000000 kHz VIEW -30 Temp 2 [T1 ndB] -43.17 dBm 111.791000000 kHz -40 T1 T2 -50 -60 3DB -70 -80 -90 -100 -110 Center 111.66 kHz 100 Hz/ Span 1 kHz

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 19 of 33 7.3 Restricted Bands Test Requirement 47 CFR Part 15, Subpart C 15.205 Test Method: ANSI C63.10 (2013) Section 6.10.5 Measurement Distance: 3m Limit: The fundamental wave can not fall in the restricted band 90KHz-110KHz

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 20 of 33 7.3.1 E.U.T. Operation Operating Environment: Temperature: 56.3 °C Humidity: 58.6 % RH Atmospheric Pressure: 1020 mbar Test mode: a:Charge mode_Keep the EUT charging 7.3.2 Test Setup Diagram 7.3.3 Measurement Procedure and Data

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 21 of 33 * RBW 1 kHz Marker 1 [T1 ] * VBW 3 kHz -22.62 dBm Ref -10 dBm * Att 10 dB SWT 130 ms 113.910000000 kHz -10 OBW 94.770000000 kHz Temp 1 [T1 OBW] 1 -26.07 dBm A -20 T1 110.660000000 kHz 1 PK Temp 2 [T1 OBW] VIEW T2 -30 -32.35 dBm 205.430000000 kHz -40 -50 -60 3DB -70 -80 -90 -100 -110 Start 100 kHz 13 kHz/ Stop 230 kHz

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 22 of 33 According the test data above, the fundamental wave is not fall in the restricted band 90KHz-110KHz, the field strength also meet the 15.209 requirement, so this test is Pass.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 23 of 33 7.4 Radiated Emissions (9kHz-30MHz) Test Requirement 47 CFR Part 15, Subpart C 15.237(c) Test Method: ANSI C63.10 (2013) Section 6.4&6.5 Measurement Distance: 3m Limit: Frequency(MHz) Field strength(microvolts/meter) Measurement distance(meters) 0.009-0.490 2400/F(kHz) 300 0.490-1.705 24000/F(kHz) 30 1.705-30.0 30 30 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 Remark: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90kHz, 110-490kHz and above 1000 MHz. Radiated emission limits in these three bands are based on measurements employing an average detector, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. If field strength is measured at only a single point, then that point shall be at the radial from the EUT that produces the maximum emission at the frequency being measured, as described in 5.4. If that point is closer to the EUT than λ/2π and the limit distance is greater than λ/2π, the measurement shall be extrapolated to the limit distance by conservatively presuming that the field strength decreases at a 40 dB/decade of distance rate to the λ/2π distance, and at a 20 dB/decade of distance rate beyond λ/2π. This shall be accomplished using Equation (2): FS(10m) = FS(30/300m) + 40log{d(near field)/d(10m)} + 20log{d(30/300m)/d(near field)} (2) If the single point measured is at a distance greater than λ/2π, then extrapolation to the limit distance shall be calculated using Equation (3): FS(10m) = FS(30/300m) + 20log{d(30/300m)/d(10m)} (3) If both the single point and the limit distance are equal to or closer to the EUT than λ/2π, then extrapolation to the limit distance shall be calculated using Equation (4): FS(10m) = FS(30/300m) + 40log{d(30/300m)/d(10m)} (4) Remark: dnear field = 47.77 / fMHz where f MHz is the frequency of the emission being measured in MHz.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 24 of 33 7.4.1 E.U.T. Operation Operating Environment: Temperature: 23 °C Humidity: 54 % RH Atmospheric Pressure: 1005 mbar Pretest these a:Charge mode_Keep the EUT charging(5W) modes to find b:Charge mode_Keep the EUT charging(7.5W) the worst case: c:Charge mode_Keep the EUT charging(10W) The worst case c:Charge mode_Keep the EUT charging(10W) for final test: 7.4.2 Test Setup Diagram 7.4.3 Measurement Procedure and Data For testing performed with the loop antenna, the center of the loop was positioned 1 m above the ground and positioned with its plane vertical at the specified distance from the EUT. During testing the loop was rotated about its vertical axis for maximum response at each azimuth and also investigated with the loop positioned in the horizontal plane. Only the worst position of vertical was shown in the report.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 25 of 33 Mode:c 9kHz-150KHz

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 26 of 33 150kHz-30MHz

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 27 of 33 7.5 Radiated Emissions (30MHz-1GHz) Test Requirement 47 CFR Part 15, Subpart C 15.237(c) Test Method: ANSI C63.10 (2013) Section 6.4&6.5 Measurement Distance: 10m Limit: Frequency(MHz) Field strength(microvolts/meter) Measurement distance(meters) 0.009-0.490 2400/F(kHz) 300 0.490-1.705 24000/F(kHz) 30 1.705-30.0 30 30 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 Remark: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90kHz, 110-490kHz and above 1000 MHz. Radiated emission limits in these three bands are based on measurements employing an average detector, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 28 of 33 7.5.1 E.U.T. Operation Operating Environment: Temperature: 23 °C Humidity: 54 % RH Atmospheric Pressure: 1005 mbar Pretest these a:Charge mode_Keep the EUT charging(5W) modes to find b:Charge mode_Keep the EUT charging(7.5W) the worst case: c:Charge mode_Keep the EUT charging(10W) The worst case c:Charge mode_Keep the EUT charging(10W) for final test: 7.5.2 Test Setup Diagram

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 29 of 33 7.5.3 Measurement Procedure and Data a. The EUT was placed on the top of a rotating table 0.8 meters above the ground for below 1GHz at a 3 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. g. Test the EUT in the lowest channel,the middle channel,the Highest channel h. The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode,And found the X axis positioning which it is worse case. i. Repeat above procedures until all frequencies measured was complete. Remark: Level= Read Level+ Cable Loss+ Antenna Factor- Preamp Factor

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 30 of 33 Mode: c; Polarization: Horizontal

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 31 of 33 Mode: a; Polarization: Vertical

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 32 of 33 The test was performed at a 10m test site. According to below formulate and the test data at 10m test distance, L3 / L10 = D10 / D3 Note: L3: Level @ 3m distance. Unit: uV/m; L10: Level @ 10m distance. Unit: uV/m; D3: 3m distance. Unit: m D10: 10m distance. Unit: m The level at 3m test distance is below: Frequency Level @ 10m Level @ 3m Limit @ 3m Polarity Margin (dB) (MHz) (dBuV/m) (dBuV/m) (dBuV/m) 41.20 H 15.12 25.58 40.00 -14.42 67.20 H 15.77 26.23 40.00 -13.77 139.85 H 22.32 32.78 43.50 -10.72 340.78 H 22.32 32.78 46.00 -13.22 706.70 H 25.74 36.20 46.00 -9.80 935.55 H 29.77 40.23 46.00 -5.77 35.62 V 17.79 28.25 40.00 -11.75 66.03 V 23.22 33.68 40.00 -6.32 140.84 V 25.95 36.41 43.50 -7.09 199.99 V 26.56 37.02 43.50 -6.48 429.52 V 22.03 32.49 46.00 -13.51 935.55 V 29.01 39.47 46.00 -6.53

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501379501 Page: 33 of 33 8 Photographs 8.1 Test Setup Refer to Setup Photos 8.2 EUT Constructional Details (EUT Photos) Refer to EUT external and internal photos - End of the Report -


Document Created: 2019-06-06 01:01:57
Document Modified: 2019-06-06 01:01:57
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC