user manual

FCC ID: 2AO23-BTSP47

Users Manual

Download: PDF
FCCID_4398410

Cut Line wireless speaker charging + Full charge requires approximately 3—4 hours, charge complete when red light turns off +Open charge port cover on speaker + Plug micro end of charging cable into speaker +Plug USB end of charging cable into a computer or 5V DC USB power supply TWS (True Wireless Stereo) pairing * Turn Bluetooth off on your device * Place two matching speakers together, turn the speakers on +On one speaker, press the bluetooth button twice quickly and they will pair automatically left side right side * Enable Bluetooth on your device and connect to HEYDAY SPEAKER 06 + Sound will play from both speakers when connected correctly + Speakers will pair automatically after TWS pairing press — pair bluetooth pause/play charge * To use speakers individually, hold the bluetooth button on the main speaker for 2 seconds power hold — unpair bluetooth answer/end calls light and follow individual speaker pairing troubleshooting T 7 *~—7 + If the speakeris not working correctly, turn it on/off to reset + If the speaker won‘t turn on recharge the battery and try again ©O O O L elfMei @®A |—_ch charge « + If the speaker won‘t charge, make sure the supply works, is 5V>1A, and not damaged If the speaker makes no sound or does not show as an available device, make sure it is not paired, if so unpair the device and repair the desired device * This device does not have a pairing code. If you are prompted for one make sure press — volume down press — volume up you are connecting to the correct device. If you are, "forget" the device and repair. hold — last track hold — next track If you are still prompted enter 0000. IPX7 water resistance + With the charge flap closed this speakeris water resistant and can be submerged up 5.6 in to 3 ft for up to 30 minutes, perfect for the bathroom, beach and anywhere in between need some help? included Can‘t get it to pair? Have a question or comment? Cl» « Bluetooth speaker +Micro USB charging cable call us at: 877—698—4883 or: 877—MyTgtTech online at: TargetTechSupport.com pairing + Power ON speaker safety ©Rapid flashing white light + Submersible up to one meter of water for less than 30 minutes * Use Bluetooth settings on your phone to pair with HEYDAY SPEAKER 06 + Do not modify orrepair this device oWhite light turns solid followed by a chime — pairing successful + Do not use in high temperatures or extreme weather indicators + Do not use chemical detergents to clean your device, use a soft dry cloth *Flashing Red — Low Battery « Solid Red — Charging e No Red Light — Fully Charged heyday6X aRapid Flashing White — Pairing Mode FCC ID:2A023—BTSP47 Model:BTSP47 Input:SV m Max1A Made in China This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1} this device may not cause oSolid White — Bluetooth Connected harmful interference, and 2) this device must accept interference received, including interference that may cause undesired operation. Werning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could vaid the user‘s authority to operate the equipment. + Ascending Tones — Power on NOTE: This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This + Descending Tones — Power off equipment generates, uses and can radiate radio frequency energy and, if not installed and used in eccordancewith the instructions, may cause harmful interference to radio communications. * Three Rapid Tones — Ready to pair However, there is no guarantee that interference will not occur in a particular installation.. If this equipment does cause harmful + Single Chime — Paired interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: * Two Rapid Dings — Low battery « Recrient or relocate the receiving antennc. + Quick Ascending Tone — Max Volume « Increase the separation between the equipmentand receiver. * Connect the equipmentinto an outlet on a circuit different from that to which the receiver is connected. + Quick Descending Tone — Min. Volume « Consult the dealer or an experienced radio/TV technicion for help. Target Corp. Mpis. MN, 55403 Phone: 1—612—304—6073 front back Rt:102x142mm


Document Created: 2019-08-12 18:03:28
Document Modified: 2019-08-12 18:03:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC