User Manual

FCC ID: 2ANVW-MA-3040

Users Manual

Download: PDF
FCCID_4479919

FCC Statement Thank you for trusting MUVEACOUSTICS with delivering NOTE: This equipment has been tested and found to comply you excellence in sound. We encourage you to connect with the limits for a Class B digital device, pursuant to part 15 of with us and become a part of our community! the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. SCAN THE QR CODE YOU WILL FIND INSIDE. SHARE This equipment generates uses and can radiate radio frequency WITH US YOUR PRODUCT EXPERIENCE. energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: USER MANUAL AND WARRANTY - Reorient or relocate the receiving antenna. MA-3040 - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio / TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and JOIN THE COMMUNITY (2) this device must accept any interference received, including interference that may cause undesired operation. SIGN UP to receive Changes or modifications not expressly approved by the party ∙ Special Offers! responsible for compliance could void the user's authority to ∙ Access to Events! operate the equipment. ∙ Contests! ∙ News on new products launched FCC ID: 2ANVW-MA-3040 1936032 www.muveacoustics.com/community Bluetooth Connection This product has Bluetooth wireless technology. It is compatible with Bluetooth wireless equipped computers, Warning And Cautions for the charging case and earbuds: smartphones and MP3 players. 1. Do not fully submerge in water. The earbuds are IPX5 water resistance only. To use Bluetooth for you audio connection pair TAO with your 2. Keep the earbuds and charging box clean and dry for audio source (music player, smartphone, laptop or other storage and charging. Avoid dusty, damp, and dirty Bluetooth equipped device that can act as audio source). First of environments. Using the device in these environments may all, take out the TAO earbuds from the charging case for power damage the circuitry. on and go to pairing mode. Then the Bluetooth feature is 3. Do not use the device during thunderstorms to avoid any enabled on your mobile device in order to search for available lightning-related damage or injury. devices. In a few moments ‘MUVEACOUSTICS:TAO’ will appear 4. Only charge or use the device at ambient temperatures on your list of possible Bluetooth connections. Press ‘pair’ or between 0 deg °C/ 32 deg °F and 45 deg °C/ 113 deg °F. ‘connect’ on your device and when the connection is made, you 5. Keep the device away from excessive heat sources and direct can hear “your device is connected”. sunlight. Do not throw it into fire or in heating devices, such as microwave ovens, stoves or radiators. The device may even The period of Bluetooth pairing is about 90 seconds. If there is no explode in extreme overheating circumstances. pairing, TAO will shut off automatically after 10 minutes. 6. Do not store device in enclosed vehicle. 7. Do not attempt to disassemble or remanufacture the device, From now on, when you turn on TAO, it will automatically search insert foreign objects into it, or immerse or expose it to water for the last Bluetooth device it was paired with. or other liquids. Doing so may lead to fire, explosion or other hazards. To pair with another device, you should shut off both earbuds 8. Do not attempt to burn the device as it may explode. and disable the Bluetooth connection of your device. Then turn 9. Dispose of the device in accordance with local regulations. on the earbuds and repeat pairing procedure for another device. Do not dispose of the device in normal household waste. Improper device disposal is dangerous and could cause an explosion. Please respect local laws on the disposal of MUVEACOUSTICS ONE-YEAR LIMITED WARRANTY electronic products and their accessories and support MUVEACOUSTICS TAO earbuds have been subjected to a recycling efforts. thorough series of tests to ensure the highest level of 10. Keep the device out of reach of children and pets to prevent dependability. It is unlikely that you will experience any problem, them from accidentally swallowing and choking on the small but if a defect should become apparent during the use of this parts of the device. Biting or swallowing the device could lead product, MUVEACOUSTICS warrants to the original purchaser to serious injury. that this product will be free from defects in material and 11. Do NOT allow small children to use the earbuds. workmanship for a period of 12 months from the date of your 12. Do not drop, squeeze, or pierce the device. If excessive original purchase from an authorized dealer. If a defect covered pressure is applied to the device, the device may short-circuit by this warranty occurs, MUVEACOUSTICS, at its option, will or overheat. repair or replace the product purchase at no repair charge 13. When the device is being charged, make sure the power (postage charges will apply). If a replacement is necessary and source is close to the device and easy to reach. your product is no longer available, a comparable product may 14. When the device is fully charged, disconnect the charger be substituted at the sole discretion of MUVEACOUSTICS. from the device and unplug the charger from the power outlet. Do not leave charging overnight. This warranty does not cover normal wear and tear, abusive use 15. Do not use the charging case in excess of its output rating. or misuse, modification, tampering or by any other cause not 16. Use caution and follow applicable laws regarding mobile related to either materials or workmanship. This warranty does phone and headphones use if using the earbuds for phone not apply to product used for any industrial, professional or calls while driving. Some jurisdictions impose specific commercial purposes. limitations, such as single ear piece configuration, on the use of such products while driving. DON’T use the earbuds for any other purpose while driving. CUSTOMER SERVICE 17. Do not use a charging case that is damaged or modified. Damaged or modified batteries may exhibit unpredictable For any service or technical queries, please contact our behavior resulting in fire, explosion or risk of injury to persons. service team on the below email. 18. Do NOT use the earbuds at a high volume for any extended period. Email: consumersupport@zeeva.com - To avoid hearing damage, use your earbuds at a comfortable, moderate volume level. Keep all relevant information for future reference - Turn the volume down on your device before placing the earbuds in/on your ears, then turn the volume up gradually until you reach a comfortable listening level. 19. Please note that we won’t take any responsibility for any Imported and distributed by Zeeva Electronics Private Limited. wrong operation (eg. Voltage higher than 5V) as this may All rights reserved. result in severe injury or loss of property and we cannot control the operating process during the time the user using 901-902, Trade World C wing this product. Kamla Mill Compound, Senapati Bapat Marg, 20. In extreme cases, abuse or misuse of Lithium battery pack Lower Parel West, can lead to explosion, heat generation, fire development or Mumbai-400013 smoke development.

Before your first use, please insert the earpbuds into the charging case and connect the micro USB cable provided to the charging case and to a USB power source. It takes about 2-2.5 hours for a full charge. Earbuds Bluetooth Sync Indicator White LED lights up during charging and it will turn off once fully charged. Power / Multifunction Button (MFB) For power on: ∙ When the earbuds are inside the charging case (being charged or fully charged): Take the earbuds from the charging case, both earbuds switch on automatically and you can hear “power on”. Then, they will connect to each other automatically and you can hear “connecting”. Or ∙ When the earbuds are off (outside charging case): Press the MFB of both earbuds for 2 seconds to turn the earbuds on. Pairing the earbuds with a Bluetooth device ∙ Take both earbuds out of the charging case and insert them into your ears. The distance between left and right earbud should not exceed 50 cm otherwise there may be problem in connecting each other. ∙ You will hear the voice prompt “power on”, “connecting” and “pairing” from both left and right earbud. The earbuds are in pairing mode now. The LED of the right earbud is flashing in blue and white. ∙ Activate the Bluetooth feature of your Bluetooth device. ∙ Select the ‘MUVEACOUSTICS:TAO’ from the list of found Bluetooth devices. If pairing was successful, you can hear the voice prompt “your device is connected” from right earbud. Then the LED of the earbud turns off. If there is no connection is made within 90 seconds, pairing mode is terminated and the earbuds will turn to idle mode. Please turn off the earbuds and repeat the pairing procedure if necessary. For power off: ∙ Place both earbuds into the charging case. They will turn off automatically and also be recharged. Or ∙ You can also press and hold the MFB of any earbud for 4 seconds. Both earbuds will turn off and you hear “power off”. Play / Pause Music playback pauses when you press the MFB of any earbud once and resumes when you press once again. Volume Up Double press the MFB button of the right earbud. Next Song Press and hold the MFB of the right earbud for 1 second and hear the tone notification. Volume Down Double press the MFB button of the left earbud. Previous Song Press and hold the MFB of the left earbud for 1 second and hear the tone notification. Voice Assistant Triple click the MFB of either left or right earbud to activate the voice assistant feature of your Bluetooth device. Voice assistant functions vary depending on your phone, tablet or application. Receive a phone call Press the MFB once of either left or right earbud. End a phone call Press the MFB once of either left or right earbud. Refuse a phone call Press and hold MFB for 2 seconds of either left or right earbud. Reset earbuds to factory settings When there is problem in connecting the earbuds to each other, turn off the earbuds, then press and hold the MFB simultaneously for 10 seconds. You can hear the voice notification of “reset”. The earbuds are reset to the factory settings. All pairing information is deleted. Then put the earbuds in the charging case for next use. Charging Case *1 When the power of the earbuds is low, you can hear “battery low” every 2 minutes. Please re-charge them by placing them in the charging case otherwise they will turn off automatically after some minutes. Charging case is also a storage for the earbuds. ∙ Use the micro USB cable provided with this device for connecting USB power source to the charging case in order to charge up the built-in battery of the charging case. ∙ The input voltage to the charging case is DC 5V and minimum 1A current capacity. In order to charge the device in safe manner and reliable conditions, please only adopt certified appropriate charger / adapter for charging. ∙ The white LED indicators are flashing while the charging case is being charged. All of them will be always on when the charging case has been fully charged. Indication of power level of built-in battery of charging case Power level of Power level of LED status LED status built-in battery built-in battery 0 - 25 % 50 - 75 % 25 - 50 % 75 - 99 % 100 % ∙ White LED of both earbuds lights up during charging and it will turn off once fully charged. ∙ You can charge the earbuds as long as the charging case still has power, no matter the charging case is being charged or not. ∙ You must charge the charging case and earbuds if they have not been used for more than 6 months. ∙ When the charging case is not being charged and you want to check the power level of it, please take out the right earbud from the charging case or put the right earbud back into the charging case. The LED indicators of the charging case show the power level of the built-in battery for 3 seconds. Operational Guidance Function Button Play / pause Press MFB on either one of the earbuds once Increase volume Press MFB of the right earbud twice Decrease volume Press MFB of the left earbud twice Previous song Press and hold MFB of the left earbud for 1 second, with tone notification Next song Press and hold MFB of the right earbud for 1 second, with tone notification Answer / end a call Press MFB on either one of the earbuds once Refuse incoming call Press and hold MFB on either one of the earbuds for 2 seconds Voice assistance *2 Triple click MFB on either one of the earbuds Please Note: 1. TAO earbuds come with a lithium-ion polymer battery. For best results, fully charge TAO earbuds before use. It will take 2 – 2.5 hours to fully charged. Place the earbuds in the charging case before you start charging. To charge, plug the micro USB cable into charging case and plug the standard USB connector into your DC5V USB power source. You can also charge the earbuds as long as the charging case still has power (without connecting to USB power source). RF warning statement: The charging case can be charged up individually and can be used for The device has been evaluated to meet general RF exposure requirement. The charging the earbuds later. device can be used in portable exposure condition without restriction. 2. Voice assistant functions vary depending on your phone, tablet or application. 3. TAO earbuds is rated at IPX5 waterproof and true wireless. 4. Charging case is not a waterproof device.


Document Created: 2019-10-16 03:51:00
Document Modified: 2019-10-16 03:51:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC