RF Exposure report

FCC ID: 2ANTA-LIGE770D

RF Exposure Info

Download: PDF
FCCID_4355852

RF EXPOSURE EVALUATION

According to FCC 1.1310: The criteria listed in the following table shall be used to
evaluate the environment impact of human exposure to radio frequency(RF) Radiation
as specified in §1.1307(b)

FCC ID: 2ANTA-LIGE770D

EUT Specification
EUT                            speaker
Frequency band (Operating)        WLAN: 2.412GHz ~ 2.462GHz
                                  WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz
                                  WLAN: 5.745GHz ~ 5825GHz
                                  Others 2402~2480MHz
Device category                   Portable (<20cm separation)
                                  Mobile (>20cm separation)
                                  Others ___
Exposure classification           Occupational/Controlled exposure (S = 5mW/cm2)
                                  General Population/Uncontrolled exposure (S=1mW/cm2)
Antenna diversity                 Single antenna
                                  Multiple antennas
                                  Tx diversity
                                  Rx diversity
                                  Tx/Rx diversity
Max. output power              0.928dBm (0.0012W)
Antenna gain (Max)             -0.58 dBi
Evaluation applied                MPE Evaluation
                                  SAR Evaluation

Limits for Maximum Permissible Exposure(MPE)

  Frequency     Electric Field Magnetic Field         Power               Average
 Range(MHz)     Strength(V/m) Strength(A/m) Density(mW/cm2)                Time
                (A) Limits for Occupational/Control Exposures
  300-1500            --               --             F/300                  6
 1500-100000          --               --                5                   6
            (B) Limits for General Population/Uncontrol Exposures
  300-1500            --               --             F/1500                 6
 1500-100000          --               --                1                   30


     Friis transmission formula: Pd=(Pout*G)\(4*pi*R2)

    Where
    Pd= Power density in mW/cm2
    Pout=output power to antenna in Mw
    G= gain of antenna in linear scale
    Pi=3.1416
    R= distance between observation point and center of the radiator in cm
    Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and
    total power input to the antenna, through the calculation, we will know the distance
    where the MPE limit is reached.


    Measurement Result

             Channel    Measured      Tune up      Max. Tune   Antenna   Power density     Power density
Operating
            Frequency    Power       tolerance     up Power     Gain       at 20cm            Limits
 Mode
              (MHz)      (dBm)         (dBm)        (dBm)       (dBi)     (mW/ cm2 )        (mW/cm2 )
              2402       -0.378       -0.378±1       0.622       -0.58      0.0002              1
              2441       -1.811       -1.811±1       -0.811      -0.58      0.0001              1
              2480       0.928        0.928±1        1.928       -0.58      0.0003              1
 BT5.0
              2402       -0.944       -0.944±1       0.056       -0.58      0.0002              1
              2441       -2.587       -2.587±1       -1.587      -0.58      0.0001              1
              2480       0.077        0.077±1        1.077       -0.58      0.0002              1



Document Created: 2019-07-12 10:36:35
Document Modified: 2019-07-12 10:36:35

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC