RF Exposure report

FCC ID: 2ANNWAN-H310C

RF Exposure Info

Download: PDF
FCCID_3579591

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE156054 Page: 1 of 4 Maximum Permissible Exposure Evaluation FCC ID: 2ANNWAN-H310C 1. Client Information Applicant : Shenzhen Annidigital Technology Co., Ltd 3rd Floor, Hasee Bldg, NO.1, Banlan Road, Bantian, Buji Town, Address : Longgang, Shenzhen, China Manufacturer : Shenzhen Annidigital Technology Co., Ltd Address : 3rd Floor, Hasee Bldg, NO.1, Banlan Road, Bantian, Buji Town, Longgang, Shenzhen, China 2. General Description of EUT EUT Name : IP Camera AN-H310C, AN-H310X, AN-H310X-XX, AN-HXXXX, AN-HXXXX-XX Models No. : ("X" dedicated to A to Z and/or 0 to 999 up to 10 digits) Model All models are identical in the same PCB layout interior structure and : Difference electrical circuits, The only difference is pixel. 802.11b/g/n(HT20): 2412MHz~2462MHz Operation Frequency: 802.11n(HT40): 2422MHz~2452MHz 802.11b/g/n(HT20):11 channels see note(3) Number of Channel: 802.11n(HT40): 7 channels see note(3) RF Output Power: 802.11b: 17.45dBm 802.11g: 18.23dBm 802.11n (HT20): 16.72dBm Product : 802.11n (HT40): 15.62dBm Description Antenna Gain: 4dBi PFC Antenna Modulation Type: 802.11b: DSSS(CCK, QPSK, BPSK) 802.11g: OFDM 802.11n: OFDM Bit Rate of 802.11b: 11/5.5/2/1 Mbps Transmitter: 802.11g: 54/48/36/24/18/12/9/6 Mbps 802.11n:up to 150Mbps Power Supply : DC Voltage supplied by AC/DC Adapter. TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE156054 Page: 2 of 4 Power Rating : AC/DC Adapter (KSD200): Input: AC 110~240V, 50/60Hz, 0.3A. Output: DC 5V, 2A. Connecting : Please refer to the User's Manual I/O Port(S) Note: More information about the RF function, please refer the RF test reports. TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Report No.: TB-MPE156054 Page: 3 of 4 MPE Calculations for WIFI 1. Antenna Gain: PFC Antenna: 4dBi. 2. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 4. Test Result: Worst Maximum MPE Result Conducted Max tune up Power Turn-up ANT Gain Distance Density Freq. Power(max) power Mode N TX Power (dBi) (cm) 2 (MHz) (dBm) (dBm) (mW/ cm ) (dB) [G] [R] [P] [S] 2412 16.31 17±1 18 4 20 0.0315 802.11b 1 2437 16.80 17±1 18 4 20 0.0315 2462 17.45 17±1 18 4 20 0.0315 2412 16.93 17±1.5 18.5 4 20 0.0354 802.11g 1 2437 17.69 17±1.5 18.5 4 20 0.0354 2462 18.23 17±1.5 18.5 4 20 0.0354 2412 15.24 16±1 17 4 20 0.0251 802.11n 1 2437 16.18 16±1 17 4 20 0.0251 (HT20) 2462 16.72 16±1 17 4 20 0.0251 2422 14.82 15±1 16 4 20 0.0199 802.11n 1 2437 15.29 15±1 16 4 20 0.0199 (HT40) 2452 15.62 15±1 16 4 20 0.0199 Note: (1) N TX = Number of Transmit Antennas (2) RF Output power specifies that Maximum Conducted Peak Output Power. TB-RF-075-1.0

Report No.: TB-MPE156054 Page: 4 of 4 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range Power density (MHz) (mW/ cm2) 300-1,500 F/1500 1,500-100,000 1.0 For 802.11b/g/n (2412~2462 MHz) MPE limit S: 1mW/ cm2 The MPE is calculated as 0.0354mW / cm2 < limit 1mW / cm2. So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report. -----END OF REPORT----- TB-RF-075-1.0


Document Created: 2017-09-19 19:09:45
Document Modified: 2017-09-19 19:09:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC