Tune-up-Procedure

FCC ID: 2ANMU-W3

Parts List/Tune Up Info

Download: PDF

FCCID_4132773

W3 Tune up procedure
Tune up procedure shall be over the power range or at specific operating power levels.

1. It must provide an operational voltage to turn on the device and on one certain channel in

service mode by means of company proprietary software..

2. The maximum gains of each individual device are adjusted until the target value met.

Tune‐up Power
Mode Frequency Bands Tune‐up Power
2.4GHz‐Low ‐3.0dBm±1dB
BT 2.4GHz‐Middle ‐5.0dBm±1dB
2.4GHz‐High ‐5.0dBm±1dB

Then these appropriate gain settings are stored in each device individually.

The user has no possibility to change these settings later on, and during manufacturing each device

will be individual calibrated. Furthermore, the highest power level is verified afterwards in a call

measurement on three channels (low, middle and high).

Document Created: 2018-12-29 11:30:23
Document Modified: 2018-12-29 11:30:23

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC