User Manual 2

FCC ID: 2ANM3NTUDT3

Users Manual

Download: PDF
FCCID_4337541

1. General Operational Description This document is to specify the product requirements for 802. 11bigin Module. This Card is based on MT 7603chipset . It is a highly integrated VWi—Fi single chip which supports 300 Mbps PHY rate. It fully complies with IEEE 802.11n and IEEE 802.11 big standards, offering feature—rich wireless connectivity at high standards, and delivering reliable, cost—effective throughput from an extended distance. . Features D & Compatible with IEEE 802.11b standard to provide wireless 11Mbps data rate. ® Compatible with IEEE 802.119 standard to provide wireless 54Vbps data rate. ® Compatible with IEEE 802.11n standard to provide wireless 300Mbps data rate. ® Operation at 2.4~2.483.5@Hz frequency band to meet worldwide regulations ®@ Supports infrastructure networks via Access Point and ad—hoo network via peer—to—peer com munication @ Supports IEEE 802.11) (WPAand WPA2), WAPL enhanced security ®@ Friendly user configuration and diagnostic utilities @— Orivers support Win10,WinBWMn7 XP,Linux ® ROHS compliant 6 RF specification 2.4~2.483.5GHe frequency 3. Application Diagrams 3.1 Functional Block Diagram RFO » _ System weo_ ina_ext(— : mac/ (—3 Y receiver control Packet ::} buffer/ RFO security transmitter/ |~~, engine y USB :fl use receiver Baseband RFL _ wei_Lna_ext bolke ¢ receiver " 32—bit RISC RF1 wei_ior f werion transnfltter/ _ receiver

3.2 General Requirements 3.2.1 IEEE 802.11b Section Feature Detailed Description 3.2.1.1 Standard ● IEEE 802.11b 3.2.1.2 Radio and Modulation ● DQPSK , DBPSK , DSSS , and CCK Schemes 3.2.1.3 Operating Frequency ● 2400 ～ 2483.5MHz ISM band 3.2.1.4 Channel Numbers ● 11 channels for United States ● 13 channels for Europe Countries ● 14 channels for Japan 3.2.1.5 Data Rate ● 11,5.5,2,and 1Mbps 3.2.1.6 Media Access Protocol ● CSMA/CA with ACK 3.2.1.7 Transmitter Output Power at ● Typical RF Output Power at each RF chain, Data Antenna Connector Rate and at room Temp. 25 degree C ● 17dBm(±2dB) at 1,2,5.5,11Mbps 3.2.1.8 Receiver Sensitivity at ● Typical Sensitivity at Which Frame(1000-byte Antenna Connector PDUs)Error Rate=8% ● -76 dBm at 2Mbps ● -76 dBm for 11Mbps 3.2.2 IEEE 802.11g Section Feature Detailed Description 3.2.2.1 Standard ● IEEE 802.11g 3.2.2.2 **Radio and Modulation Type ● QPSK , BPSK , 16QAM ,64QAM with OFDM 3.2.2.3 Operating Frequency ● 2400 ～ 2483.5MHz ISM band 3.2.2.4 Channel Numbers ● 11 channels for United States ● 13 channels for Europe Countries ● 13 channels for Japan 3.2.2.5 Data Rate ● 6,9,12,18,24,36,48,54Mbps 3.2.2.6 Media Access Protocol ● CSMA/CA with ACK 3.2.2.7 Transmitter Output Power at ● Typical RF Output Power(tolerance±2dB) at Antenna Connector each RF chain, Data Rate and at room Temp. 25degree C ● +17(±2) dBm at 6,9Mbps ● +16(±2) dBm at 12,18Mbps ● +15(±2) dBm at 24,36Mbps ● +14(±2) dBm at 48,54Mbps 3.2.2.8 Receiver Sensitivity at Antenna Connector ● Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate<10% at room 4

Temp 25 degree C ● -82 dBm at 6Mbps ● -81 dBm at 9Mbps ● -79 dBm at 12Mbps ● -77 dBm at 18Mbps ● -74 dBm at 24Mbps ● -70 dBm at 36Mbps ● -66 dBm at 48Mbps ● -65 dBm at 54Mbps 3.2.3 IEEE 802.11n Section Feature Detailed Description 3.2.3.1 Standard ● IEEE 802.11n 3.2.3.2 Radio and Modulation Type ● BPSK , QPSK , 16QAM ,64QAM with OFDM 3.2.3.3 Operating Frequency ● 2.4GHz band:2400 ~ 2483.5MHz 20MHz 40MH 20MHz 40MHz 0 6.5 13.5 7.2 15 1 13 27 14.4 30 2 19.5 40.5 21.7 45 3 26 54 28.9 60 4 39 81 43.3 90 5 52 108 57.8 120 6 58.5 121.5 65.0 135 7 65 135 72.2 150 8 13 27 14.444 30 9 26 54 28.889 60 10 39 81 43.333 90 11 52 108 57.778 120 12 78 162 86.667 180 13 104 216 115.556 240 14 117 243 130.000 170 15 130 270 144.444 300 3.2.3.4 Media Access ● CSMA/CA with ACK 5

Protocol 3.2.3.5 Transmitter Output ● Typical RF Output Power (tolerance：±2dB) at each RF chain, Data Power at Antenna Rate and at room Temp. 25 degree C Connector ● 2.4GHz Band/HT20 ● 2.4GHz Band/HT40 +14(±2)dBm at MCS0~7 +14(±2)dBm at MCS0~7 Typical Sensitivity at each RF chain at Which Frame(1000-byte PDUs)Error 3.2.3.6 Receiver Sensitivity Rate=10% and at room Temp.25 degree C at Antenna 3.2.3.7 Connector 2.4GHz Band/HT20 2.4GHz Band/HT40 ● -82dBm at MCS0 ● -79dBm at MCS0 ● -79dBm at MCS1 ● -76dBm at MCS1 ● -77dBm at MCS2 ● -74dBm at MCS2 ● -74dBm at MCS3 ● -71dBm at MCS3 ● -70dBm at MCS4 ● -67dBm at MCS4 ● -66dBm at MCS5 ● -63dBm at MCS5 ● -65dBm at MCS6 ● -62dBm at MCS6 ● -64dBm at MCS7 ● -61dBm at MCS7 4. Electrical and Thermal Characteristics 4.1 Environmental Requirements Parameter Minimum Maximum Units Storage Temperature -40 +80 ℃ Ambient Operating Temperature 0 60 ℃ Junction Temperature 0 125 ℃ Operating Humidity conditions 10 90 % Non-Operating Humidity Conditions 5 95 % 4.2 General Section Feature Detailed Description 4.2.1 Antenna Type ● WIFI ANT :PIFA Antenna 4.2.2 Operating Voltage ● 3.3V ±10% 4.2.3 Current Consumption ● ＜1000mA 4.2.4 Form Factor and Interface ● High Speed USB2.0 Interface 5、Connector Pin Symbol 1 NC 2 Host_wake 3 GND 6

4 GND 5 D+ 6 D- 7 3.3V 8 Rest 6、Product photo



Document Created: 2019-03-05 09:25:25
Document Modified: 2019-03-05 09:25:25
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC