User Manual

FCC ID: 2ANM3NHS8902

Users Manual

Download: PDF
FCCID_4311725

Shenzhen skyworth RGB electronic co., LTD. Model: HS-8902 Operation Instruction Dear customer, thank you for purchasing skyworth products. I will give you some information about this product. This product meets the Bluetooth Version 5.0 specification. Speech recognition performance can reach more than 95%(7M). Bluetooth remote control is over 15 meters away. Vertical infrared remote-control distance of 8 meters. Battery you need: 2*1.5 V AAA size. The usage of this product is as follows: 1. Turn on the TV ac, press the standby button on the remote control. 2. Long-press the composite key“home + left”on the remote control until the light flashes. 3. Keep the remote control within one meter of the TV. 4. Facing the TV, press the Google button. 5. The remote control is paired with the TV via Bluetooth. The TV screen pops up a pairing prompt. 6. Start using the product. Television system has the memory function, for the first time to use should be according to the above steps, later need not

operation, boot automatically connected. If you need to reconnect, need according to the above steps again. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is - connected. - Consult the dealer or an experienced radio/television technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This device complies with FCC radiation limits set forth for an uncontrolled environment.


Document Created: 2019-06-04 11:53:16
Document Modified: 2019-06-04 11:53:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC