18_S08 RFExp

FCC ID: 2ANK8-S08

RF Exposure Info

Download: PDF
FCCID_4266666

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE165563 Page: 1 of 3 Maximum Permissible Exposure Evaluation FCC ID: 2ANK8-S08 1. Client Information Applicant : Shenzhen Forever Young Technology Co.,Ltd 4/F, No.5 Bldg, Fu Hong Industrial Park, Fu Yong Town, Bao'an Address : District, Shenzhen, China Manufacturer : Shenzhen Forever Young Technology Co.,Ltd 4/F, No.5 Bldg, Fu Hong Industrial Park, Fu Yong Town, Bao'an Address : District, Shenzhen, China 2. General Description of EUT EUT Name : WiFi Infrared Remote Control Models No. : S08 Model Different : N/A Operation 802.11b/g/n(HT20): 2412MHz~2462MHz Frequency: RF Output Power: 802.11b: 15.97dBm 802.11g: 15.45dBm Product 802.11n (HT20): 14.48dBm : Description Antenna Gain: 2.5dBi PCB Antenna Modulation Type: 802.11b: DSSS(CCK, DQPSK, DBPSK) 802.11g/n: OFDM(BPSK,QPSK,16QAM, 64QAM) Power Supply : DC Voltage by AC/DC Adapter supplied Power Rating : Input: DC 5V1A Software Version : N/A Hardware Version : N/A Connecting I/O : Please refer to the User's Manual Port(S) TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Report No.: TB-MPE165563 Page: 2 of 3 MPE Calculations for WIFI 1. Antenna Gain: PCB Antenna: 2.5dBi. 2. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 4. Test Result: Conducted Max tune up Power Turn-up ANT Gain Distance Density Power(max) power Mode Power (dBi) (cm) 2 (dBm) (dBm) (mW/ cm ) (dB) [G] [R] [P] [S] 802.11b 15.97 15±1 16 2.5 20 0.01408 802.11g 15.45 15±1 16 2.5 20 0.01408 802.11n 14.48 14±1 15 2.5 20 0.01119 (HT20) TB-RF-075-1.0

Report No.: TB-MPE165563 Page: 3 of 3 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range Power density (MHz) (mW/ cm2) 300-1,500 F/1500 1,500-100,000 1.0 For 802.11b/g/n:2412~2462 MHz MPE limit S: 1mW/ cm2 The MPE is calculated as 0.01408mW / cm2 < limit 1mW / cm2. So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report. -----END OF REPORT----- TB-RF-075-1.0


Document Created: 2019-05-09 13:53:50
Document Modified: 2019-05-09 13:53:50
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC