RF Exposure Report

FCC ID: 2ANK8-S06

RF Exposure Info

Download: PDF
FCCID_4084735

Report No.: TB-MPE162760 Page: 1 of 3 Maximum Permissible Exposure Evaluation FCC ID: 2ANK8-S06 1. Client Information Applicant : Shenzhen Forever Young Technology Co.,Ltd 4/F, No.5 Bldg, Fu Hong Industrial Park, Fu Yong Town, Bao'an Address : District, Shenzhen, China Manufacturer : Shenzhen Forever Young Technology Co.,Ltd 4/F, No.5 Bldg, Fu Hong Industrial Park, Fu Yong Town, Bao'an Address : District, Shenzhen, China 2. General Description of EUT EUT Name : WiFi Infrared Remote Control Models No. : S06 Model Difference : N/A Operation 802.11b/g/n(HT20): 2412MHz~2462MHz Frequency: Number of Channel: 802.11b/g/n(HT20):11 channels Product RF Output Power: 802.11b: 15.78 dBm : 802.11g: 14.72 dBm Description 802.11n (HT20): 14.45 dBm Modulation Type: 802.11b: DSSS(CCK, DQPSK, DBPSK) 802.11g/n: OFDM(BPSK, QPSK,16QAM, 64QAM) Power Supply : DC 5V for USB Port. Software Version : N/A Hardware Version : N/A Connecting I/O : Please refer to the User's Manual Port(S) Note: More test information about the EUT please refer the RF Test Report. TB-RF-075-1.0

Report No.: TB-MPE162760 Page: 2 of 3 MPE Calculations for WiFi 1. Antenna Gain: PCB Antenna: 2.5dBi. 2. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 4. Test Result: Worst Maximum MPE Result Conducted Max tune up Power Turn-up ANT Gain Distance Density Freq. Power(max) power Mode NTX Power (dBi) (cm) 2 (MHz) (dBm) (dBm) (mW/ cm ) (dB) [G] [R] [P] [S] 2412 15.78 16±1 17 2.5 20 0.0177 802.11b 1 2437 15.48 16±1 17 2.5 20 0.0177 2462 15.24 16±1 17 2.5 20 0.0177 2412 14.41 14±1 15 2.5 20 0.0112 802.11g 1 2437 14.36 14±1 15 2.5 20 0.0112 2462 14.72 14±1 15 2.5 20 0.0112 2412 14.28 14±1 15 2.5 20 0.0112 802.11n 1 2437 14.23 14±1 15 2.5 20 0.0112 (HT20) 2462 14.45 14±1 15 2.5 20 0.0112 Note: (1) NTX= Number of Transmit Antennas (2) RF Output power specifies that Maximum Conducted Peak Output Power. TB-RF-075-1.0

Report No.: TB-MPE162760 Page: 3 of 3 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range Power density (MHz) (mW/ cm2) 300-1,500 F/1500 1,500-100,000 1.0 For 802.11b/g/n (2412~2462 MHz) MPE limit S: 1 mW/ cm2 The MPE is calculated as 0.0177mW / cm2 < limit 1 mW / cm2. So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report. -----END OF REPORT----- TB-RF-075-1.0


Document Created: 2018-11-20 17:20:40
Document Modified: 2018-11-20 17:20:40
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC