User Manual

FCC ID: 2ANH7-IAEPV38B

Users Manual

Download: PDF
FCCID_4012778

User’s Guide for Model IAEPV38 v2181-01 IAEPV38-2181-01-IB-0915.indd 1 15/09/2018 10:53:04 AM

IAEPV38-2181-01-IB-0915.indd 2 15/09/2018 10:53:04 AM

SAFETY WARNINGS FCC WARNINGS • WARNING: Where the mains plug WARNING: To assure continued operation, or appliance coupler is used as the follow the attached installation instructions disconnect device, such disconnect and use only shield cables when connecting device shall remain readily operable. not expressly approved by the party • Risk of electric shock. Grounding responsible for compliance could void the continuity must be maintained. user’s authority to operate the equipment. • Lithium batteries, like all rechargeable NOTE: This equipment has been tested and batteries, are recyclable and should found to comply with the limits for a Class be recycled or disposed of according B digital device, pursuant to Part 15 of the to state and local guidelines. They FCC Rules. These limits are designed to should never be disposed of in normal provide reasonable protection against harmful household waste, and they should interference in a residential installation. never be incinerated, as they might This equipment generates, uses, and can explode. Contact your local government radiate radio frequency energy and, if not for disposal or recycling practices in installed and used in accordance with the your area. instructions, may cause harmful interference • Only use the included power supply or to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or • To avoid hearing damage, make sure television reception, which can be determined that the volume on your music player by turning the equipment off and on, the is turned down before connecting your user is encouraged to try to correct the earbuds. After placing earbuds in/on interference by one or more of the following your ears, gradually turn up the volume measures: until you reach a comfortable listening level. • Reorient or relocate the receiving antenna. WARNING: This product can • Increase the separation between the expose you to chemicals including equipment and receiver. lead, which is known to the State of California to cause cancer and birth • Connect the equipment into an outlet on defects or other reproductive harm. a circuit different from that to which the For more information go to: www. receiver is connected. P65Warnings.ca.gov This product • Consult the dealer or an experienced meets and complies with all radio/TV technician for help. Federal regulations. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 3 IAEPV38-2181-01-IB-0915.indd 3 15/09/2018 10:53:04 AM

TABLE OF CONTENTS Introduction - 5 Features Includes Overview Earbuds Controls & Inputs - 6 Control Functions - 7 Setup 1. Charging the Earbuds - 8 2. Download the Alexa App - 9 3. Download the iLive Smart Bluetooth App - 9 4. iLive Smart Bluetooth App - 10 5. Things to Try with Alexa - 13 Smart Bluetooth App Home Screen - 14 Menu Screen - 15 Music Player Screen - 16 Other Ways to Play - 17 Bluetooth without the App Troubleshooting - 18 Customer Support - 20 Contact Information International Support Warranty Information 4 IAEPV38-2181-01-IB-0915.indd 4 15/09/2018 10:53:04 AM

INTRODUCTION Take Alexa with you where ever you go with our Wireless Earbuds. Link Amazon Alexa with the earbuds and ask Alexa to play music*, read the news, check weather, control your smart home and more. Features »» Voice-activated Amazon Alexa cloud-based voice service* »» Free iLive Smart Bluetooth app download »» Bluetooth Wireless - range 33 ft. »» Rubberized coating »» Voice prompts »» Built-in microphone for speakerphone functions »» Built-in rechargeable battery with Micro-USB port for battery recharge »» Battery life: approximately 4 hours Includes »» 3 sets of eartips: small, medium, and large »» Micro-USB charging cable »» Premium travel case »» User’s Guide »» Warranty *Free app download required. Mobile carrier/data charges may apply when Amazon Alexa not connected to a Wi-Fi network. Specifications, software updates, and third party content are subject to change without prior notice. 5 IAEPV38-2181-01-IB-0915.indd 5 15/09/2018 10:53:04 AM

OVERVIEW Earbuds Controls & Inputs 1 2 6 5 / 3 / PAIR 4 1. Ear Hook 4. Indicator LED & Microphone 2. Micro-USB Charging Port (side) 5. Volume Up/Down 3. Power/Pair/Play/Pause 6. Alexa Button 6 IAEPV38-2181-01-IB-0915.indd 6 15/09/2018 10:53:05 AM

Control Functions »» Volume Press to adjust the volume level. »» Power Press and hold to skip audio tracks. Press and hold to power ON and OFF. »» Play/Pause When music is playing, press to play or pause audio from a connected Bluetooth device. »» Speakerphone »» Alexa Button Press to answer or end a Press to activate Amazon phone call. Alexa and say a command. »» Pair Press to being pairing to a Bluetooth device (see pg. 10 for pairing procedure). 7 IAEPV38-2181-01-IB-0915.indd 7 15/09/2018 10:53:05 AM

SETUP 1. Charging the Earbuds Use a Micro-USB to USB cable (included) to connect the DC IN (Micro-USB power input) on the earbuds to the USB port on a powered on computer or USB power adapter (not included). A fully charged battery will provide up to 3 hours of playtime. Battery life will improve at lower volume levels and decrease at higher volume levels. Indicator light Battery Status Computer Red light ON Charging battery Blue light ON Charging complete Red light flashing Low battery, charge soon DC IN USB Power Adapter DC IN (not included) 8 IAEPV38-2181-01-IB-0915.indd 8 15/09/2018 10:53:05 AM

2. Download the Alexa App Download the Amazon Alexa app to your device by scanning the appropriate QR code below or search for the Amazon Alexa app in the Google Play™ Store, or Apple App Store ®. Android Apple The Amazon Alexa app connects your earbuds to Alexa’s voice services. It’s also where you can see an overview of your requests and manage your contacts, lists, news, music, and settings. Once downloaded, open the Alexa app and log into your Amazon account. If you do not already have an Amazon account, choose “Create a new Amazon account” and enter the requested info. Once logged in, the app will prompt you for setup. You can add these details now by choosing “Get Started,” or skip these steps and complete the process later. You cannot use Alexa Voice Services if you aren’t logged into an Amazon account. 3. Download the iLive Smart Bluetooth App The iLive Smart Bluetooth app connects your Amazon account and Amazon Alexa Voice Services with the earbuds. Download our free app to your device by scanning the QR codes below or search for the iLive Smart Bluetooth app in the Google Play™ Store, or Apple App Store ®. Android Apple Note: This app is designed for mobile devices only, such as smartphones or Wi-Fi enabled tablets. It is not available for use on regular desktop or laptop computers. If you are not connected to a Wi-Fi network, using Amazon Alexa may use your mobile carrier’s data to fulfill requests and answer questions. 9 IAEPV38-2181-01-IB-0915.indd 9 15/09/2018 10:53:06 AM

SETUP 4. iLive Smart Bluetooth App To use the earbuds with Amazon Alexa, your mobile device must both be connected to a Wi-Fi network and signed into the Amazon Alexa app. The iLive Smart Bluetooth app uses a Bluetooth connection with your device to access Wi-Fi and Alexa. The app will guide you through the connection process, just follow the on-screen instructions. After the initial Bluetooth connection, the earbuds will automatically have access to Amazon Alexa, as long as your device is signed in to the Amazon Alexa app. Initial App Connection 1. Beginning with the earbuds off, press and hold the Power button for 5 seconds to power on the earbuds and begin pairing Bluetooth. Be sure to press and hold until you see the LED indicator flash red and blue and you hear a voice prompt from the earbuds. (Image A, below). 2. Open the app and select IAEVP38, then begin following the on screen instructions (Image B, below). A. B. / / PAIR 10 IAEPV38-2181-01-IB-0915.indd 10 15/09/2018 10:53:06 AM

3. On your Bluetooth device, open the Bluetooth Settings and select IAEPV38 from the list of available devices. It may take a moment before your device detects the earbuds and is available in the list. When pairing, remain within 3 ft. of your device. You may also need to scan for Bluetooth devices manually from your mobile device (Image C, below). 4. When successfully paired, the Mode/Connection LED on the earbuds will flash blue twice every 5 seconds and a voice prompt will announce the connection. Audio from the connected device will now be played through the earbuds. 5. Return to the iLive Smart Bluetooth app. After a few moments, the app should automatically pair with your phone (Image D, below). Setup instructions continued on the next page. C. D. 11 IAEPV38-2181-01-IB-0915.indd 11 15/09/2018 10:53:06 AM

SETUP Initial App Connection (continued) 6. When the connection is complete, the app will prompt you to link the earbuds with the Amazon Alexa app on your device (Image E, below). If you do not have the Amazon Alexa app on your device, refer to the instructions on pg. 9. 7. Enter your Amazon account information and sign in (Image F, below). 8. The Amazon Alexa app will show you some examples to try out. Press “Done” to finish setup and begin using your earbuds (Image G, right). E. F. 12 IAEPV38-2181-01-IB-0915.indd 12 15/09/2018 10:53:07 AM

5. Things to Try with Alexa Now that you’re connected, press the button to try interacting with Alexa. Here are some things to try: »» “Tell me a joke.” »» “What’s in the news?” »» “Add apples to my shopping list.” »» “What can you do?” Note: Most Alexa devices work by listening for the “Alexa” wake word to activate Alexa and respond to your queries. Due to the unique nature of this product and their intended use, this feature is not enabled for these earbuds. To make use of Alexa, you must press the button. G. 13 IAEPV38-2181-01-IB-0915.indd 13 15/09/2018 10:53:07 AM

SMART BLUETOOTH APP Home Screen This is the default screen when you open the iLive Smart Bluetooth app. 1 2 3 5 4 1. Menu & Settings 4. Alexa Button/Indicator View and adjust settings. Press to activate Alexa and ask her 2. Information Area a question. Displays information from Alexa, 5. Music for example weather, shopping Press to go to the Music player. list, etc. 3. Home Press to go to the Home screen. 14 IAEPV38-2181-01-IB-0915.indd 14 15/09/2018 10:53:07 AM

Menu Screen 1 2 3 4 5 1. Devices 4. Device Information Linked devices shown here. View and change the device name. 2. Alexa Account 5. Send Feedback Sign in or out of Amazon Alexa. Send feedback to the app 3. Alexa Language developer. Press to change Alexa’s interface language. 15 IAEPV38-2181-01-IB-0915.indd 15 15/09/2018 10:53:07 AM

SMART BLUETOOTH APP Music Player Screen 1 2 1. Audio information Artist and track info displayed here. 2. Play Controls Use to play, pause, or skip audio. 16 IAEPV38-2181-01-IB-0915.indd 16 15/09/2018 10:53:07 AM

OTHER WAYS TO PLAY Bluetooth without the App The earbuds can also function as a standard Bluetooth earbuds without using the app or Amazon Alexa Voice Services. Use a connected Bluetooth device to select and begin playing audio. Use the controls on the device or the earbuds to play, pause, or skip audio. 17 IAEPV38-2181-01-IB-0915.indd 17 15/09/2018 10:53:07 AM

TROUBLESHOOTING PROBLEM POSSIBLE SOLUTION Unit will not power on »» Make sure the earbuds’ battery is charged. Recharge if needed. Audio distortion »» Volume on the earbuds or connected Bluetooth device may be too high. Reduce the volume of one or both of the devices. Bluetooth won’t play or »» Make sure the volume on your Bluetooth fails to connect device is turned up to an audible level. »» Make sure the earbuds’ battery is charged and is powered on. »» Make sure both the earbuds and your device are in Bluetooth mode. »» Stay within 3 ft. of the earbuds when pairing. »» Stay within 33 ft. of the earbuds when paired. Amazon Alexa not »» Be sure the connected Bluetooth device is responding connected to a Wi-Fi network or mobile data. »» Be sure the connected Bluetooth device has the Amazon Alexa app and is logged into your Amazon account. »» Be sure the Wi-Fi network or router is functioning normally. Restart if needed. White noise/Earbuds will »» Power the earbuds OFF, then ON again. not function properly 18 IAEPV38-2181-01-IB-0915.indd 18 15/09/2018 10:53:07 AM

IAEPV38-2181-01-IB-0915.indd 19 15/09/2018 10:53:07 AM

CUSTOMER SUPPORT Contact Information Warranty Information Website: www.iLiveElectronics.com For Warranty Information and the most Email Support: prodinfo@dpiinc.com up-to-date version of this User’s Guide, Email Parts: partsinfo@dpiinc.com go to www.iLiveElectronics.com. Phone Support: 1-888-999-4215 International Support To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en: www.iLiveElectronics.com Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique: www.iLiveElectronics.com Made Green Protect for Today Sustain for Tomorrow Copyright © 2018 Digital Products International (DPI, Inc.) Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. All other trademarks appearing herein are the property of their respective owners. 20 IAEPV38-2181-01-IB-0915.indd 20 15/09/2018 10:53:07 AM


Document Created: 2018-09-19 18:00:45
Document Modified: 2018-09-19 18:00:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC