User Manual

FCC ID: 2ANDR-OT1121807

Users Manual

Download: PDF
FCCID_4063311

User Guide Disclaimer and Warning Congratulations on purchasing your new DJI OSMOTM product. The information in this document affects your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, damage to your DJI OSMO product, or damage to other objects in the vicinity. This document and all other collateral documents are subject to change at the sole discretion of DJI OSMO. For up‐to‐date product information, visit http://www.dji.com and click on the product page for this product. By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all applicable laws, rules, and regulations, and all terms, precautions, practices, policies and guidelines DJI OSMO has made and may make available. DJI OSMO accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. The user shall observe safe and lawful practices including, but not limited to, those set forth in this document. OSMO is a trademark of SZ DJI OSMO TECHNOLOGY CO., LTD. (abbreviated as “DJI OSMO”) and its affiliated companies. Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective owner companies. Introduction The osmo packet wireless module provides a WIFI connection between the osmo pocket and your mobile device, making the transmission of photos more convenient and flexible. The osmo packet wireless module should be placed on the table when in use. The Osmo Pocket also can be placed in the wireless module.

1. USB‐C Port Connects this port to the Osmo Pocket. 2. Status Indicator Indicates the connection status. 3. Power Port (USB‐C) Connect this port to a USB charger to charge the Osmo Pocket. Installation 1. Insert the Osmo Pocket to the wireless module as shown. Power on the Osmo Pocket, the status indicator grows solid red. 2. In your mobile device, select the Wi‐Fi network named Osmo Pocket XXXX and then input the default password 12341234. The Wi‐Fi connection is established successfully when the status indicator become solid green. Launch the DJI Mimo App to use Osmo Pocket.

Specification Model OT‐112 Operating Frequency 2.412‐2.462 GHz, 5.745‐5.825 GHz Input 5V/2A Bluetooth Operating 2.402‐2.480GHz Frequency Compliance Information FCC Compliance Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information This equipment complies with FCC/ISEDC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC/ISEDC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation. Cet équipement est conforme aux limites d'exposition aux rayonnements FCC / ISEDC définies pour un environnement non contrôlé Afin d'éviter tout risque de dépassement des limites d'exposition aux fréquences radio FCC / ISEDC, la proximité humaine de l'antenne ne doit pas être inférieure à 20 cm en fonctionnement normal.

ISEDC RSS Warning This device complies with ISEDC licence‐exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'ISEDC applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. KCC Warning Message “해당무선설비는 운용 중 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다.” “해당 무선설비는 운용 중 전파혼신 가능성이 있음” NCC Warning Message 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自 變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時， 應改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功 率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 2.1 應避免影響附近雷達系統之操作。 2.1 高增益指向性天線只得應用於固定式點對點系統。 EU Compliance Statement: SZ DJI Osmo Technology Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. A copy of the EU Declaration of Conformity is available online at www.dji.com/euro‐compliance EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Declaración de cumplimiento UE: SZ DJI Osmo Technology Co., Ltd. por la presente declara que este dispositivo cumple los requisitos básicos y el resto de provisiones relevantes de la Directiva 2014/53/EU. Hay disponible online una copia de la Declaración de conformidad UE en www.dji.com/euro‐compliance

Dirección de contacto de la UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany EU‐verklaring van overeenstemming: SZ DJI Osmo Technology Co., Ltd. verklaart hierbij dat dit apparaat voldoet aan de essentiële vereisten en andere relevante bepalingen van Richtlijn 2014/53/EU. De EU‐verklaring van overeenstemming is online beschikbaar op www.dji.com/euro‐compliance Contactadres EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Declaração de conformidade da UE: A SZ DJI Osmo Technology Co., Ltd. declara, através deste documento, que este dispositivo está em conformidade com os requisitos essenciais e outras disposições relevantes da Diretiva 2014/53/EU. Existe uma cópia da Declaração de conformidade da UE disponível online em www.dji.com/euro‐compliance Endereço de contacto na UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Dichiarazione di conformità UE: SZ DJI Osmo Technology Co., Ltd. dichiara che il presente dispositivo è conforme ai requisiti essenziali e alle altre disposizioni rilevanti della direttiva 2014/53/EU. Una copia della dichiarazione di conformità UE è disponibile online all'indirizzo Web www.dji.com/euro‐compliance Indirizzo di contatto UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Déclaration de conformité UE : Par la présente, SZ DJI Osmo Technology Co., Ltd. déclare que cet appareil est conforme aux principales exigences et autres clauses pertinentes de la directive européenne 2014/53/EU. Une copie de la déclaration de conformité UE est disponible sur le site www.dji.com/euro‐compliance Adresse de contact pour l'UE : DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany EU‐Compliance: Hiermit erklärt SZ DJI Osmo Technology Co., Ltd., dass dieses Gerät den wesentlichen Anforderungen und anderen einschlägigen Bestimmungen der EU‐Richtlinie 2014/53/EU entspricht. Eine Kopie der EU‐Konformitätserklärung finden Sie online auf www.dji.com/euro‐compliance. Kontaktadresse innerhalb der EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

CAUTION: RISK OF EXPLOSIO ON IF BATTEERY IS REPLACED BY ANN INCORRECTT TYPE. DISP POSE OF USED U BATTERIES ACCORDING TO THE IN NSTRUCTIONSS Environmentally friendly dispo osal Old electrical appliances musst not be disp posed of toge ether with thhe residual wwaste, but havve to be disposed of seeparately. The disposal at the commun nal collectingg point via prrivate persons is for freee. The ownerr of old appliaances is respo onsible to bring the appliaances to thhese collecting points orr to similar collection c po oints. With th his little perssonal efforrt, you contribute to recyycle valuable raw materiaals and the treatment of toxic subsstances. Thhailand Warn ning message e เครืรื่ องโทรคมนาคมแลละอุปกรณ์น้ ี มีความสอดคล้องตามข้อกําหนดของ า กทช. Mexxico Warning message “Laa operación de d este equipo está sujetta a las siguiientes dos co ondiciones: (1) es posible e que este equipo o disspositivo no cause interfeerencia perju udicial y (2) este e equipo o dispositivo debe acep ptar cualquier interferenciia, incluyendo o la que pued da causar su operación o noo deseada.” Brazzil Warning message m Este equipamento opera em m caráter secundário, istto é, não teem direito a proteção co ontra interrferência preejudicial, messmo de estações do mesmmo tipo, e nãão pode caussar interferên ncia a sisteemas operand do em caráter primário UAEE logo require ements The characters sh hall appear in n black print against a a whitte backgroun nd. No character c shall be less than 2mm in heiight. The letters “TRA”” shall be atleeast 3mm in height. h


Document Created: 2019-03-21 12:24:23
Document Modified: 2019-03-21 12:24:23
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC