RF Exposure Report

FCC ID: 2ANDR-OF1001904

RF Exposure Info

Download: PDF
FCCID_4379863

Test Report No.: FS190522N040 RF EXPOSURE REPORT Applicant SZ DJI Osmo Technology Co., Ltd. 2F, Building 3, Binhai Mingzhu Industrial Park No. 291 Louming Road, Xinhu Street Address Guangming District, Shenzhen, China Manufacturer or SZ DJI Osmo Technology Co., Ltd. Supplier 2F, Building 3, Binhai Mingzhu Industrial Park No. 291 Louming Road, Xinhu Street Address Guangming District, Shenzhen, China Product Osmo Mobile 3 Brand Name DJI Model OF100 Additional Model & N/A Model Difference Date of tests May 23, 2019 ~ June 06, 2019 FCC Part 2 (Section 2.1093) KDB 447498 D01 IEEE C95.1 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Evans He Approved by David Huang Project Engineer / EMC Department Supervisor / EMC Department Date: June 10, 2019 This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 1 of 6 Report Version 1

Test Report No.: FS190522N040 Table of Contents RELEASE CONTROL RECORD ................................................................................ 3 1. CERTIFICATION .............................................................................................. 4 2. RF EXPOSURE DEFINE ................................................................................. 5 3. CLASSIFICATION ........................................................................................... 5 4. SAR TEST EXCLUSION THRESHOLDS ........................................................ 6 No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 2 of 6 Report Version 1

Test Report No.: FS190522N040 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED FS190522N040 Original release June 10, 2019 No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 3 of 6 Report Version 1

Test Report No.: FS190522N040 1. CERTIFICATION FCC ID: 2ANDR-OF1001904 PRODUCT: Osmo Mobile 3 BRAND NAME: N/A MODEL NO.: OF100 ADDITIONAL NO.: N/A TEST SAMPLE: Engineering Sample APPLICANT: SZ DJI TECHNOLOGY CO.,LTD STANDARDS: FCC Part 2 (Section 2.1093) KDB 447498 D01 IEEE C95.1 No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 4 of 6 Report Version 1

Test Report No.: FS190522N040 2. RF EXPOSURE DEFINE The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. 3. CLASSIFICATION The antenna of this product, under normal use condition, is at less than 20cm away from the body of the user. So, this device is classified as Portable Device. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 5 of 6 Report Version 1

Test Report No.: FS190522N040 4. SAR TEST EXCLUSION THRESHOLDS The tuned conducted Average Power (declared by client) Target Lower Upper Frequency Tolerance Mode Power Tolerance Tolerance (MHz) (dBm) (dBm) (dBm) (dBm) BT-LE (1Mbps) 2402-2480 2 +-2 4 0 BT-LE (2Mbps) 2402-2480 2 +-2 4 0 The measured conducted Average Power Frequency Averaged Power Mode (MHz) (dBm) BT-LE (1Mbps) 2402 0.21 BT-LE (2Mbps) 2402 0.19 SAR Test Exclusion Thresholds Maximum source-based Minimum Limit for Frequency time averaged separation Result of Limit for 10-g Verdict (MHz) conducted distance Eq. 1 1-g SAR extremity output power (mm) SAR (dBm) Exempt 2402-2480 1 5 0.39 3.0 7.5 from SAR Conclusion Therefore this device complies with FCC’s RF radiation exposure limits for general population without SAR evaluation. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8593 5656 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 6 of 6 Report Version 1


Document Created: 2019-07-08 13:47:09
Document Modified: 2019-07-08 13:47:09
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC