EMC Test Report

FCC ID: 2ANDLTY-R8810

Test Report

Download: PDF
FCCID_4476739

FCC TEST REPORT Report No.: ARFR-19AU0430VTSHPB-3 Test Model: SC002-WM2 Received: Sept.05, 2019 ISSUED: Sept.27, 2019 Applicant: Hangzhou Tuya Information Technology Co., Ltd Address: Room701, Building3, More Center,No.87 GuDun Road, Hangzhou, Zhejiang, China Issued By: BUREAU VERITAS ADT (Shanghai) Corporation Lab Location: No. 829, Xinzhuan Road, Shanghai, P.R.China (201612) This test report consists of 22 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by A2LA, CNAS, or any government agency. The test results in the report only apply to the tested item. The test results in this report are traceable to the national or international standards. Report No.: ARFR-19AU0430VTSHPB-3 Page 1 of 22 FCC/IC-ITE V1.1

Contents 1. TEST PROGRAM.................................................................................................................................... 3 2. Summary of Test Procedure and Test Results ..................................................................................... 4 3. Test Configuration of Equipment under Test ....................................................................................... 5 3.1 Manufacturer information............................................................................................................. 5 3.2 Feature of Equipment under Test................................................................................................. 5 3.3 Description of support units ......................................................................................................... 5 3.4 Measurement Uncertainty ........................................................................................................... 6 4 Test of Conducted Emission ................................................................................................................. 7 4.1 Test Limit .................................................................................................................................... 7 4.2 Test Procedures .......................................................................................................................... 8 4.3 Typical Test Setup ....................................................................................................................... 8 4.4 Measurement Equipment ............................................................................................................ 9 4.5 Test Result and Data ................................................................................................................. 10 4.6 Test Photographs ...................................................................................................................... 12 5 Test of Radiated Emission .................................................................................................................. 13 5.1 Test Limit .................................................................................................................................. 13 5.2 Test Procedures ........................................................................................................................ 14 5.3 Typical Test Setup ..................................................................................................................... 14 5.4 Measurement Equipment .......................................................................................................... 15 5.5 Test Result and Data (30MHz ~ 1GHz) ...................................................................................... 16 5.6 Test Result and Data (1GHz ~ 18GHz) ...................................................................................... 18 5.7 Test Photographs (30MHz ~ 1000MHz) ..................................................................................... 20 5.8 Test Photographs (1000MHz ~ 18000MHz) ............................................................................... 21 6 Photographs of EUT ............................................................................................................................ 22 Report No.: ARFR-19AU0430VTSHPB-3 Page 2 of 22 FCC/IC-ITE V1.1

g@ 1. TEST PROGRAM PRODUCT: Smart Camera TEST MODEL: SCO02—WM2 SERIES MODEL: APPLICANT: Hangzhou Tuya Information Technology Co., Ltd TESTED: Sept.05 to Spet.24, 2019 STANDARDS: 47 CFR FCC Part15, Subpart B, Class B ANSI C63.4:2014 We, BUREAU VERITAS ADT (Shanghai) Corporation, declare that the equipment above has been tested and found compliance with the requirement limits of applicable standards. The test record, data evaluation and Equipment Under Test (EUT) configurations represented herein are true and accurate under the standards herein specified. PREPARED BY : , DATE: Sept.27, 2019 Will YAN Project Engineer APPROVED BY : _ — , DATE: Sept.27, 2019 \ .\ ‘Daniel Sun«— RF:Supervisor,,, < Report No.: ARFR—19AUO0430VTSHPB—3 Page 3 of 22 FCC/IC—ITE V1.1

2. Summary of Test Procedure and Test Results EMISSION(47 CFR FCC Part15, Subpart B) Test Item Normative References Test Result Meets the Class B Conducted Emission 47 CFR FCC Part15, Subpart B 15.107 requirements Meets the Class B Radiated Emission 47 CFR FCC Part15, Subpart B 15.109 requirements Special Comment: All tests were performed on 120Vac 60Hz. Report No.: ARFR-19AU0430VTSHPB-3 Page 4 of 22 FCC/IC-ITE V1.1

3. Test Configuration of Equipment under Test 3.1 Manufacturer information Manufacturer : Hangzhou Tuya Information Technology Co., Ltd Room701, Building3, More Center,No.87 GuDun Road, Hangzhou, Zhejiang, Address : China 3.2 Feature of Equipment under Test Product Name: Smart Camera Test Model: SC002-WM2 Series Model: -- Model Discrepancy: -- EUT Power Rating: 5VDC/1A with adaptor 100-240Vac~, 50/60Hz Note: Please refer to user manual. 3.3 Description of support units NO. PRODUCT BRAND MODEL NO. 1 AC adapter -- KA1517-0502000USU 2 Mobile Phone Vivo -- 3 Cable -- -- Report No.: ARFR-19AU0430VTSHPB-3 Page 5 of 22 FCC/IC-ITE V1.1

3.4 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT: This listed uncertainties are the worst case uncertainty for the entire range of measurement. Please note that the uncertainty values are provided for informational purposes only and are not used in determining the PASS/FAIL results. Measurement Value Conducted emissions 2.55 dB 30 MHz ~ 1GHz 3.22 dB Radiated emissions Above 1GHz 2.89 dB Report No.: ARFR-19AU0430VTSHPB-3 Page 6 of 22 FCC/IC-ITE V1.1

4 Test of Conducted Emission 4.1 Test Limit TEST STANDARD: CFR 47 FCC Part 15, Subpart B (Section: 15.107) Class A (dBµV) Class B (dBµV) FREQUENCY (MHz) Quasi-peak Average Quasi-peak Average 0.15 - 0.5 79 66 66 - 56 56 - 46 0.50 - 5.0 73 60 56 46 5.0 - 30.0 73 60 60 50 NOTES: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 3. All emanations from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. Report No.: ARFR-19AU0430VTSHPB-3 Page 7 of 22 FCC/IC-ITE V1.1

4.2 Test Procedures 5 The EUT was placed on a desk 0.8 meters height from the metal ground plane and 0.4 meter from the conducting wall of the shielding room and it was kept at least 0.8 meters from any other grounded conducting surface. 6 Connect EUT to the power mains through a Artificial Mains Network (AMN). 7 All the support units are connecting to the other AMN. 8 The AMN provides 50 ohm coupling impedance for the measuring instrument. 9 The CISPR states that a 50 ohm, 50 micro-Henry AMN should be used. 10 Both sides of AC line were checked for maximum conducted interference. 11 The frequency range from 150 kHz to 30 MHz was searched 12 Set the test-receiver system to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. 4.3 Typical Test Setup Report No.: ARFR-19AU0430VTSHPB-3 Page 8 of 22 FCC/IC-ITE V1.1

4.4 Measurement Equipment CALIBRATED DESCRIPTION & MANUFACTURER MODEL NO. SERIAL NO. UNTIL Test Receiver ESCS30 E1R1001 Mar.04, 2020 ROHDE & SCHWARZ LISN ENV216 E1L1011 Jul.17, 2020 ROHDE & SCHWARZ Software ADT_Cond_V7.3.0 N/A N/A ADT Report No.: ARFR-19AU0430VTSHPB-3 Page 9 of 22 FCC/IC-ITE V1.1

4.5 Test Result and Data a. Conducted Emission Test Data Phase : LINE REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: ARFR-19AU0430VTSHPB-3 Page 10 of 22 FCC/IC-ITE V1.1

Phase : NEUTRAL REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: ARFR-19AU0430VTSHPB-3 Page 11 of 22 FCC/IC-ITE V1.1

4.6 Test Photographs Report No.: ARFR-19AU0430VTSHPB-3 Page 12 of 22 FCC/IC-ITE V1.1

5 Test of Radiated Emission 5.1 Test Limit TEST STANDARD: CFR 47 FCC Part 15, Subpart B (Section: 15.109) FOR FREQUENCY BELOW 1000 MHz Class A (at 10m) Class B (at 3m) FREQUENCY (MHz) µV/m dBµV/m µV/m dBµV/m 30 – 88 90 39.1 100 40.0 88 – 216 150 43.5 150 43.5 216 – 960 210 46.4 200 46.0 960 – 1000 300 49.5 500 54.0 LIMIT OF RADIATED EMISSION OF FCC PART 15, SUBPART B FOR FREQUENCY ABOVE 1000 MHz Class A (dBµV/m) (at 3m) Class B (dBµV/m) (at 3m) FREQUENCY (MHz) PEAK AVERAGE PEAK AVERAGE Above 1000 80.0 60.0 74.0 54.0 Note: (1) The lower limit shall apply at the transition frequencies. (2) Emission level (dBuV/m) = 20 log Emission level (uV/m). (3) All emanation from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. Report No.: ARFR-19AU0430VTSHPB-3 Page 13 of 22 FCC/IC-ITE V1.1

5.2 Test Procedures a. The EUT was placed on a rotatable table top 0.8 meter above ground. b. The EUT was set 3/10 meters from the interference receiving antenna which was mounted on the top of a variable height antenna tower. c. The table was rotated 360 degrees to determine the position of the highest radiation. d. The antenna is a half wave dipole and its height is varied between one meter and four meters above ground to find the maximum value of the field strength both horizontal polarization and vertical polarization of the antenna are set to make the measurement. e. For each suspected emission the EUT was arranged to its worst case and then tune the antenna tower (from 1 M to 4 M) and turn table (from 0 degree to 360 degrees) to find the maximum reading. f. Set the test-receiver system to Peak Detect Function and specified bandwidth with Maximum Hold Mode. g. If the emission level of the EUT in peak mode was 3 dB lower than the limit specified, then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions which do not have 3 dB margin will be repeated one by one using the quasi-peak method and reported. 5.3 Typical Test Setup Report No.: ARFR-19AU0430VTSHPB-3 Page 14 of 22 FCC/IC-ITE V1.1

5.4 Measurement Equipment CALIBRATED DESCRIPTION & MANUFACTURER MODEL NO. SERIAL NO. UNTIL EMI Test Spectrum ESR7 E1R1005 Dec.03, 2019 ROHDE & SCHWARZ Spectrum Analyzer N9030B E1S1003 Jul.22, 2020 Keysight Broad-Band Antenna VULB9168 E1A1012 Aug.25, 2020 Schwarzbeck Double Riaged Vroadband Horn Antenna BBHA9120D E1A1017 Jan.26, 2020 Schwarzbeck Preamplifier 8447D E1A2001 Oct.14, 2019 Agilent Preamplifier EMC051845SE E1A2009 Jul.18, 2020 Agilent Report No.: ARFR-19AU0430VTSHPB-3 Page 15 of 22 FCC/IC-ITE V1.1

5.5 Test Result and Data (30MHz ~ 1GHz) Position: Horizontal REMARKS: 1. Q.P. is abbreviation of quasi-peak individually. 2. The emission levels of other frequencies were very low against the limit. 3. QP Margin value = QP Limit value – QP value. 4. Factor = Antenna Factor + Amplifier Factor + Cable loss. 5. QP value = Factor + Reading Value. Report No.: ARFR-19AU0430VTSHPB-3 Page 16 of 22 FCC/IC-ITE V1.1

Position: Vertical REMARKS: 1. Q.P. is abbreviation of quasi-peak individually. 2. The emission levels of other frequencies were very low against the limit. 3. QP Margin value = QP Limit value – QP value 4. Factor = Antenna Factor + Amplifier Factor + Cable loss 5. QP value = Factor + Reading Value. Report No.: ARFR-19AU0430VTSHPB-3 Page 17 of 22 FCC/IC-ITE V1.1

5.6 Test Result and Data (1GHz ~ 18GHz) Position: Horizontal REMARKS: 1. The emission levels of other frequencies were very low against the limit. 2. Margin = Limit –Level Report No.: ARFR-19AU0430VTSHPB-3 Page 18 of 22 FCC/IC-ITE V1.1

Position: Vertical REMARKS: 1. The emission levels of other frequencies were very low against the limit. 2. Margin = Limit –Level Report No.: ARFR-19AU0430VTSHPB-3 Page 19 of 22 FCC/IC-ITE V1.1

5.7 Test Photographs (30MHz ~ 1000MHz) Report No.: ARFR-19AU0430VTSHPB-3 Page 20 of 22 FCC/IC-ITE V1.1

5.8 Test Photographs (1000MHz ~ 18000MHz) Report No.: ARFR-19AU0430VTSHPB-3 Page 21 of 22 FCC/IC-ITE V1.1

6 Photographs of EUT --- END --- Report No.: ARFR-19AU0430VTSHPB-3 Page 22 of 22 FCC/IC-ITE V1.1


Document Created: 2019-10-14 17:06:09
Document Modified: 2019-10-14 17:06:09
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC