Modular Approval Letter

FCC ID: 2ANDL-TYZS3

Cover Letter(s)

Download: PDF
FCCID_4447184

Company: Hangzhou Tuya Information Technology Co.,Ltd Address: Room701,Building3,More Center,No.87 GuDun Road, Hangzhou,Zhejiang, China Tel: 86-571-86581786 Fax: 86-571-86581786 Date (07/23/2019) Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Modular Approval Request FCC ID: 2ANDL-TYZS3 The following attestation addresses the requirements to support modular approval: Modular approval requirement Yes (provide brief statement) No * (a) The radio elements must have the The module has a metal shied. radio frequency circuitry shielded. Refer to the external photo of Physical components and tuning EUT. capacitor(s) may be located external to the shield, but must be on the module assembly (b) The module must have buffered Data to the modulation circuit is modulation/data inputs to ensure that buffered as described in the the device will comply with Part 15 operational description provided requirements with any type of input with the application. signal (c) The module must contain power The module contains its own supply regulation on the module power supply regulation. Please refer to schematic filed with this application. (d) The module must contain a The module connects to its permanently attached antenna, or antenna using an UFL

Company: Hangzhou Tuya Information Technology Co.,Ltd Address: Room701,Building3,More Center,No.87 GuDun Road, Hangzhou,Zhejiang, China Tel: 86-571-86581786 Fax: 86-571-86581786 contain a unique antenna connector, connector which is considered a and be marketed and operated only non-standard connector. A list with specific antenna(s), per Sections of antennas tested and 15.203, 15.204(b), 15.204(c), approved with this device may 15.212(a), 2.929(b) be found in users manual provided with the application (e) The module must demonstrate The module was tested stand- compliance in a stand-alone alone as shown in test setup configuration photographs filed with this application. (f) The module must be labelled with The FCC ID is printed on the its permanently affixed FCC ID label, label of the module.Refer to the or use an electronic display (See label of EUT. KDB Publication 784748 about labelling requirements) (g) The module must comply with all The module comply with all specific rules applicable to the specific rules.Refer to the transmitter. The grantee must provide datasheet. comprehensive instructions to explain compliance requirements Modular approval requirement Yes (provide brief statement) No * (h) The module must comply with RF The module meets Portable exposure requirements exclusion levels as shown in the RF exposure information filed with this application. * Please provide a detailed explanation if the answer is “No.” Yours sincerely,

Company: Hangzhou Tuya Information Technology Co.,Ltd Address: Room701,Building3,More Center,No.87 GuDun Road, Hangzhou,Zhejiang, China Tel: 86-571-86581786 Fax: 86-571-86581786 Name: Title: General Manager


Document Created: 2019-09-18 19:36:09
Document Modified: 2019-09-18 19:36:09
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC