RF Exposure

FCC ID: 2ANDLTYBT2

RF Exposure Info

Download: PDF
FCCID_4258150

Bay Area Compliance Laboratories Corp. (Kunshan)                                 Report No.: RSHD190131002-00A

FCC §1.1310& §2.1091 - MAXIMUM PERMISSIBLE EXPOSURE (MPE)
Applicable Standard

According to subpart 15.247(i) and subpart §1.1310, systems operating under the provisions of this section
shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in
excess of the Commission’s guidelines.

Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091)

                              (B) Limits for General Population/Uncontrolled Exposure
  Frequency Range           Electric Field          Magnetic Field          Power Density          Averaging Time
        (MHz)              Strength (V/m)           Strength (A/m)            (mW/cm2)               (minutes)
       0.3-1.34                  614                      1.63                  *(100)                    30
       1.34-30                  824/f                    2.19/f                *(180/f²)                  30
       30-300                   27.5                     0.073                    0.2                     30
      300-1500                    /                                             f/1500                    30
    1500-100,000                  /                                               1.0                     30

f = frequency in MHz; * = Plane-wave equivalent power density;

According to §1.1310 and §2.1091 RF exposure is calculated.


Calculated Formulary:

Predication of MPE limit at a given distance
S = PG/4πR² = power density (in appropriate units, e.g. mW/cm2);
P = power input to the antenna (in appropriate units, e.g., mW);
G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain
factor, is normally numeric gain;
R = distance to the center of radiation of the antenna (appropriate units, e.g., cm);


Calculated Data:

                Frequency                              Tune-up      Evaluation                Power
                                  Antenna Gain                                                            MPE Limit
   Mode           Range                             Conducted Power Distance                 Density
                                                                                                          (mW/cm2)
                  (MHz)          (dBi)    (numeric) (dBm)    (mW)     (cm)                  (mW/cm2)

    BLE           2402~2480      2.00        1.58       6.50         4.47        20          0.0014            1.0

Conclusion: The EUT meets exemption requirement- RF exposure evaluation greater than 20cm distance specified in
§ 2.1091. If the device built into a host as a portable usage, the additional RF exposure evaluation may be required as
specified by§ 2.1093.




FCC Part 15.247                                                                                        Page 11 of 43



Document Created: 2019-04-30 02:31:07
Document Modified: 2019-04-30 02:31:07

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC