18_IP99 RFExp r1

FCC ID: 2ANBQ-IP99

RF Exposure Info

Download: PDF
FCCID_4312071

EXPOSURE REPORT FCC ID: 2ANBQ-IP99 Date of issue: June 10, 2019 Report Number: MTi190423E155 Sample Description: Q. POWER PRO Model(s): IP99 Applicant: Momax Technology (Shenzhen) Limited Address: No.709, Floor 7, Vanke Fuchun Eastern Mansion Shennan Road 7006, Futian District, Shenzhen, China Date of Test: Feb. 21, 2019 – June 10, 2019 Shenzhen Microtest Co., Ltd. http://www.mtitest.com

Table of Contents Applicant’s name: Momax Technology (Shenzhen) Limited No.709, Floor 7, Vanke Fuchun Eastern Mansion Shennan Road Address: 7006, Futian District, Shenzhen, China Manufacture's name: iMX Electronic (Shenzhen) Co., LTD F/4 East Side Mech. Factory, EVOC Tech. Industrial. Park, No.11 Address: Gaoxin Rd., Gaoxin Area, Guangming New Area, Shenzhen City, Guangdong, PRC. Product name: Q. POWER PRO Trademark: MOMAX Model name: IP99 Standard: FCC CFR 47 PART 1 , 1.1310 RF Exposure Procedures: KDB 680106 D01 RF Exposure Wireless Charging App v03 This device described above has been tested by Shenzhen Microtest Co., Ltd. and the test results show that the equipment under test (EUT) compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Tested by: Jone Lee June 10, 2019 Reviewed by: Blue Zheng June 10, 2019 Approved by: Smith Chen June 10, 2019

1 General Information 1.1 Description of EUT Product name: Q. POWER PRO Brand name: MOMAX Model name: IP99 Series model: N/A Deference in serial model: N/A Operation frequency: 115–205 kHz Operational mode: Wireless charging Modulation type: Load modulation Antenna type: Coil antenna Power source: DC 5V from adapter or DC 3.8V by battery Battery: 3.8V 8000mAh Adapter information: N/A 1.2 Ancillary equipment list Equipment Model S/N Manufacturer Adapter HA832 / ZIMI Load / / / 1.3 Measurement uncertainty Measurement Uncertainty for a Level of Confidence of 95 %, U=2xUc(y) Radiated emission(150kHz~30MHz) ± 2.5 dB Radiated emission(30MHz~1GHz) ± 4.2 dB Radiated emission (above 1GHz) ± 4.3 dB Temperature ±1 degree Humidity ±5%

2 Testing site Test Site Shenzhen Microtest Co., Ltd No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Test Site Location Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China FCC Registration No.: 448573

3 List of test equipment Equipment Equipment Serial Calibration Manufacturer Model Due date No. Name No. date Narda Safety Broadband NBM- MTI-E068 Test Solutions D-1699 2018/07/13 2019/07/12 Field Meter 520 GmbH Narda Safety MTI-E069 Probe E-Field EF0691 H-0571 2018/07/13 2019/07/12 Test Solutions

4 Test Results 4.4 Maximum permissible exposure 4.4.1 Limit Frequency Electric field Magnetic field Power Averaging range(MHz) strength(V/m) strength(A/m) density(mW/cm2) time(minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f2 6 30-300 61.4 0.163 1.0 6 6 300-1500 f/300 6 1500-100000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f2 30 30-300 27.5 0.073 0.2 30 300-1500 f/1500 30 1500-100000 1 30 f = frequency in MHz * = Plane-wave equivalent power density 4.4.2 Test Procedures E and H-field measurements should be made with the center of the probe at a distance of 15 cm surrounding the device and 20 cm above the top surface of the primary/client pair. These measurements should be repeated for three different client battery levels, 1%, 50%, and 99%. Record the test results. KDB 680106 D01 RF Exposure Wireless Charging App v03: (1) Power transfer frequency is less than 1MHz. (2) Output power from each primary coil is less than or equal to 15 watts. (3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. (4) Client device is placed directly in contact with the transmitter. (5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). (6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Note: The device is in compliance with KDB 680106 D01 RF Exposure Wireless Charging App v03 6 conditions.

4.4.3 Test Setup Top Side Back Side Left Side 15cm Right Side Field Probe Front Side Bottom Side

4.4.4 Test Result Maximum permissible Exposure Battery Test Test sides E –field(V/m) H–field(A/m) levels distance(cm) <1% Top 20 0.416 0.116 <1% Bottom 15 0.424 0.110 <1% Left 15 0.421 0.112 <1% Right 15 0.423 0.107 <1% Front 15 0.418 0.104 <1% Back 15 0.414 0.109 Limit 614 1.63 Margin Limit (%) 0.069% 7.12% Maximum permissible Exposure Battery Test Test sides E –field(V/m) H–field(A/m) levels distance(cm) <50% Top 20 0.423 0.120 <50% Bottom 15 0.409 0.116 <50% Left 15 0.413 0.113 <50% Right 15 0.414 0.109 <50% Front 15 0.416 0.112 <50% Back 15 0.411 0.107 Limit 614 1.63 Margin Limit (%) 0.069% 7.36% Maximum permissible Exposure Battery Test Test sides E –field(V/m) H–field(A/m) levels distance(cm) <99% Top 20 0.435 0.119 <99% Bottom 15 0.424 0.108 <99% Left 15 0.421 0.103 <99% Right 15 0.418 0.102 <99% Front 15 0.422 0.113 <99% Back 15 0.416 0.105 Limit 614 1.63 Margin Limit (%) 0.071% 7.30%

4.4.5 MPE Setup photo ----END OF REPORT----


Document Created: 2019-06-10 18:28:05
Document Modified: 2019-06-10 18:28:05
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC