User manual

FCC ID: 2AN8RYK-11

Users Manual

Download: PDF
FCCID_4504930

Introduction Product Overview Test and Coding It can put into your pockets or purses or just be attached to your key ring. 1 1 Control C Panel enters connecting state. ( For details, please refer to the EN In case of emergency, press the [SOS] button, the alarm will be activated 1 .L E D i n d ic a to r 2 3 relative user manual） immediately. 2.Arm SOS 3 .D is a r m 4 SOS 5 2 Then press any key on the Remote controller. The control panel beeps 4.S tay once: the Remote controller is registered. If you hear two beeps, the Remote Wireless Remote Controller 5 . SOS controller has already been connected. YK-11 1 2 3

Specifications FCC Warning used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or This device complies with part 15 of the FCC rules. Operation is subject to the following two television reception, which can be determined by turning the equipment off and on, the user Battery: Quiescent current: Alarm current: conditions: is encouraged to try to correct the interference by one or more of the following measures: DC 3V(1*CR2032) ≤3UA ≤15mA 1)this device may not cause harmful interference, and 1)Reorient or relocate the receiving antenna. 2)this device must accept any interference received, including interference that may cause 2)Increase the separation between the equipment and receiver. Wireless standard: Wireless distance: Working environment: undesired operation. 3)Connect the equipment into an outlet on a circuit different from that to which the receiver 433MHz 70m(no obstacle) temperature -10 ℃ ~ +55 ℃ Changes or modifications not expressly approved by the party responsible for compliance is connected. ≤80%(no condensation) could void the user's authority to operate the equipment. 4)Consult the dealer or an experienced radio/TV technician for help. NOTE: This equipment has been tested and found to comply with the limits for a Class B Size: digital device, pursuant to part15 of the FCC Rules. These limits are designed to provide 69*36*11mm The device has been evaluated to meet general RF exposure requirement. The device can reasonable protection against harmful interference in a residential installation. This be used in portable exposure condition without restriction. equipment generates uses and can radiate radio frequency energy and, if not installed and The version number: YK11T1-201911-V1.0 We reserve all the right of explanation of this user manual. 4 5 6


Document Created: 2019-11-04 17:50:21
Document Modified: 2019-11-04 17:50:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC