User manual rev.1

FCC ID: 2AN2O-RSW01

Users Manual

Download: PDF
FCCID_3902279

Ruby S F89ETSM13-W2 SPEC Ruby S <V 1.0> 石头世纪科技有限公司 内部文档 未经允许请勿转发

Ruby S F89ETSM13-W2 SPEC Content 1. General Description ...................................................................................................................................3 2. Product Model Information ....................................................................................................................3 3. WIFI Specification .......................................................................................................................................3 3.1 WIFI feature ...........................................................................................................................................3 3.2 WIFI RF Performance .........................................................................................................................4 3.3 Block Diagram ......................................................................................................................................5 3.4 Dimension ..............................................................................................................................................5 3.5 PIN Assignment ...................................................................................................................................6 3.6 Schematic ...............................................................................................................................................7 4. Antenna Specification ...............................................................................................................................8 4.1 Antenna List ..........................................................................................................................................8 4.2 Wireless LAN antenna matching circuit ......................................................................................9 4.3 Antenna design requirements: .......................................................................................................9 5. FCC and IC Warning ................................................................................................................................ 10 石头世纪科技有限公司 内部文档 2

Ruby S F89ETSM13-W2 SPEC 1. General Description The F89ETSM13-W2 is a highly integrated single-chip 802.11n Wireless LAN (WLAN) network SDIO interface (SDIO 1.1/ 2.0/ 3.0 compliant) controller. It is a WLAN MAC, a 1T1R capable WLAN baseband, and WLAN RF in a single chip. It provides a complete solution for a high throughput performance integrated wireless LAN device. 2. Product Model Information Model Number F89ETSM13-W2 FCC ID 2AN2O-RSW01 IC 23317-RSW01 3. WIFI Specification 3.1 WIFI feature 1) Operate at ISM frequency Band (2.4GHz); 2) IEEE standards support, 802.11 b/g/n,; 3) Enterprise level security supporting: WEP 64bit&128bit, WPA, WPA2, WPA2- PSK and IEEE802.11i; 4) IEEE 802.11e QoS Enhancement(WMM); 5) Support 1 transmission and 1 receiving, transmission rate can up to 150Mbps (Physical Rate) in downstream and upstream. When it operating in the 2.4GHz ISM band (2.412-2.462GHz,11 Channels).it support wireless WLAN standards include 802.11b/g/n, communication has 11 channels, whose center frequencies are CH1: 2412MHz, CH2: 2417MHz, CH3: 2422MHz, CH4: 2427MHz, CH5: 2432MHz, CH6: 2437MHz, CH7: 2442MHz, CH8: 2447MHz, CH9: 2452MHz, CH10: 2457MHz, CH11:2462MHz respectively. 石头世纪科技有限公司 内部文档 3

Ruby S F89ETSM13-W2 SPEC 3.2 WIFI RF Performance Feature Description Standard IEEE 802.11 b/g/n 802.11 b: 11, 5.5, 2, 1 Mbps 802.11 /g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps Data Rate 802.11 n: MCS 0 to 7 for HT20MHz：65 Mbps MCS 0 to 7 for HT40MHz：150 Mbps IEEE 802.11b mode: CCK, DQPSK, DBPSK Modulation mode IEEE 802.11g mode: 64QAM, 16QAM, QPSK, BPSK IEEE 802.11n mode : 64QAM, 16QAM, QPSK, BPSK Ad-hoc Mode(Peer-to-Peer) Network Architecture Infrastructure mode Scatter Net Frequency Range 2.4GHz band: 2.412-2.462GHz 802.11 b: 18dBm; Transmit Output 802.11 g: 14dBm; Power 802.11 n (2.4GHz): (Tolerance: +/-1dBm) 14dBm：20MHz; 13dBm：40MHz; Antenna Type 1x1 Diversity 石头世纪科技有限公司 内部文档 4

Ruby S F89ETSM13-W2 SPEC 3.3 Block Diagram 3.3V Antenna SDIO/GSPI PA 2.4GHz HOST Interface CLK 3.4 Dimension Unit ±0.15mm 石头世纪科技有限公司 内部文档 5

Ruby S F89ETSM13-W2 SPEC 3.5 PIN Assignment Pin # Name Description 1 GND GND 2 RF RF OUTPUT 3 GND GND 4~8 NC NC 9 VBAT 3.3 or 4.2V Optional 10 NC NC 11 NC NC 12 WL_REG_ON WL_REG_ON 13 WL_HOST_WAKE WAKE UP 14 SDIO_DATA_2 SDIO_D2 15 SDIO_DATA_3 SDIO_D3 16 SDIO_DATA_CMD SDIO_CMD 17 SDIO_DATA_CLK SDIO_CLK 18 SDIO_DATA_D0 SDIO_D0 19 SDIO_DATA_D1 SDIO_D1 石头世纪科技有限公司 内部文档 6

Ruby S F89ETSM13-W2 SPEC 20 GND GND 21 NC NC 22 VDIO 1.8~3.3V 23~30 NC NC 31 GND GND 32 NC NC 33 GND GND 34~35 NC NC 36 GND GND 37~40 NC NC 41 GND GND 42~44 NC NC 3.6 Schematic 石头世纪科技有限公司 内部文档 7

Ruby S F89ETSM13-W2 SPEC 4. Antenna Specification 4.1 Antenna List No. Model Type Band(s) Max Peak Gain(dBi) 1 PCB PCB antenna 2.4GHz - 2.5GHz 3.7 石头世纪科技有限公司 内部文档 8

Ruby S F89ETSM13-W2 SPEC 4.2 Wireless LAN antenna matching circuit 4.3 Antenna design requirements: 1) RF-line need 50Ω single line impedance； 2) Antenna is 2.4G WiFi Frequency band MIFA type Board antenna 3) Antenna length, width, shape(s) as follows，Company：mm； 石头世纪科技有限公司 内部文档 9

Ruby S F89ETSM13-W2 SPEC 4) PCB thickness is 1.5mm，Copper-Layer 6，Antenna is Layer1； 5) Antenna put on the edge of the pcb，Clearance around and below； 5. FCC and IC Warning This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 石头世纪科技有限公司 内部文档 10

Ruby S F89ETSM13-W2 SPEC interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. Les antennes installées doivent être situées de facon à ce que la population ne puisse y être exposée à une distance de moin de 20 cm. Installer les antennes de facon à ce que le personnel ne puisse approcher à 20 cm ou moins de la position centrale de l’ antenne. La FCC des éltats-unis stipule que cet appareil doit être en tout temps éloigné d’au moins 20 cm des personnes pendant son functionnement. Limited by local law regulations, version for North America does not have region selection option. This device is intended for OEM integrators only. Please see the full grant of equipment document for restrictions. If the FCC ID of this module is not visible when it is installed inside another device, then the outside of the device into which the module is installed must be label with “Contains FCC ID: 2AN2O-RSW01 and IC: 23317-RSW01”. 石头世纪科技有限公司 内部文档 11


Document Created: 2018-06-26 15:48:03
Document Modified: 2018-06-26 15:48:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC