User manual

FCC ID: 2AMTQFBC342P2

Users Manual

Download: PDF
FCCID_4094920

w w w . a t g a m e s . n e t WIRELESS 2.4G WIRELESS CONTROLLER P2 CONTROLLER Wireless P2 Game Controller Appearance and Key List 3 The image below shows the location of the switches and buttons. Each function is outlined below. (The illustration is for reference only. Certain controller functions are incompatible with some games.) 4 1 START Press the button to start the game and press it again to pause. Z START Y Directional Pad (D-Pad) 2 X C Directional Pad for game playing. B A 3 Power Indicator 2 Press any key and the indicator will light up if there is still battery power left in the controller. 1 4 Power Turn the controller’s power ON/OFF. NOTE: Button functions may vary depending on game. How To pair the controller with the BLAST! HDMI dongle 1 2 3 4 5 6 Press and hold Game key Plug the small end Plug the large end of the When the power Turn the A and press Up on D-pad for Turn the of the USB cable USB cable into a USB indicator stops controller’s 5 seconds until the power controller’s into the Micro-USB port or USB AC adapter blinking, you power off. indicator starts blinking power on. port on your HDMI (not included) to turn on have completed after completing Step 3. dongle. the HDMI dongle. pairing. NOTE : If the controller is not working, the batteries may have run out. Please change the batteries. How TO confirm the wireless controller connects to the BLAST! HDMI dongle 1 Insert two AAA batteries into 2 Power on the system. Press any 3 The Power indicator light will the back of the controller. button on the controller and it blink. Repeat for the second will connect to the HDMI controller. dongle automatically. NOTE : 1 If a controller button has not been pressed for a while, the controller will enter standby mode. Press any button to wake the controller from standby. Each wireless controller requires 2 AAA batteries, not included. Controllers from previous AtGames' consoles are not supported. HOW TO PLAY TWO-PLAYER GAMES 1 2 3 Power on your Enter any 2-player game Press START on Blast! dongle. using the P1 controller. your P2 controller Find out more about Blast!™ at: to join the game. https://blast.atgames.net

Battery Safety • Never try to short-circuit the battery terminals. w w w . a t g a m e s . n e t • Rechargeable batteries are to be removed from the device before being charged. • Rechargeable batteries are only to be charged under adult supervision. • Do not charge non-rechargeable batteries. • Batteries are to be inserted with the correct polarity as indicated inside the battery compartment. • Do not mix old and new batteries. Do not mix batteries of different types: standard (carbon-zinc), alkaline, or rechargeable (nickel-cadmium). • Remove batteries during long period of non-use. • Always remove dead batteries from the product. • Dispose of batteries safely. Do not dispose this product or any batteries in a fire. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For remoter This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0mm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ISED Statement This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B). Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement. l'appareil numérique du ciem conforme canadien peut ‐ 3 (b) / nmb ‐ 3 (b). For remoter This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5 du cnr - 102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur l'exposition aux champs rf et la conformité. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0mm between the radiator & your body. Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé à distance minimum de 0mm entre le radiateur et votre corps. AtGames Digital Media, Inc. www.atgames.net


Document Created: 2018-11-07 16:47:31
Document Modified: 2018-11-07 16:47:31
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC