User Manual

FCC ID: 2AMSUGMAERGBT11

Users Manual

Download: PDF
FCCID_3493804

GMAERGBT11MA-ERGBT11 GMAERGBT11 MA-ERGBT11User Manual VER: 0.1 USER MANUAL Model NAME : Bluetooth Mouse MODEL NO. : GMAERGBT11 MA-ERGBT11 VERSION : 0.1 DATE : 2017.5.25 Page 1 of 5

User Manual VER: 0.1 Version. Revised Date PIC Remark # 0.1 5/25/2017 Bob Preliminary Page 2 of 5

User Manual VER: 0.1 Electrical Specification 1. Operating Voltage Mouse supply voltage: 3V (2AAA battery) 2. Current Consumption Current use :< 10mA 3. Sleep Mode 3.1 Electrical Current: ＜1mA; 3.2 Wake Up: Press any button 5. Mouse Pointer Performance 5.1 Resolution：800/1200 (default) /1600DPI 5.2 Speed： 25inches/sec （Max） 5.3 Acceleration：8G 6. LED Indicating Functions When the battery power is low (battery voltage reduce to <2.2V) the LED will glisten at the frequency of 1Hz Page 3 of 5

User Manual VER: 0.1 7. Wireless specifications 2.408-2.474GHz freque 2.402-2.480GHz frequency coverage. GFSK RF transceiver High Speed RF link data rate Max. 1M bit/s Button Functions 1. Left Button: Mouse left button standard function 2. Right Button: Mouse right button standard function 3. Middle Button: Mouse middle button standard function 4. Wheel: Mouse scroll wheel standard function 5. 4 Button: IE Forward function 6. 5 Button: IE Back function 7. DPI Button: DPI regulate function Page 4 of 5

User Manual VER: 0.1 Operation Process Step 1 Open the battery cover which in the back of the Mouse. Insert 2AAA battery which is environment-friendly and safety Close the battery cover. Step 2 Place the mouse on a desk or other plane surface. The surface material isn’t metal is better for wireless distance. Step 3 Insert a Transceiver in a USB port of PC. The Transceiver is pairing with the mouse. Step 4 Use the mouse freely. Page 5 of 5

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.


Document Created: 2017-08-02 16:04:41
Document Modified: 2017-08-02 16:04:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC