Report

FCC ID: 2AMSUERGBT18

Test Report

Download: PDF
FCCID_4101872

Page 1 of 34 Report No.: HK1811221683E FCC TEST REPORT FCC PART 15 SUBPART C 15.249 Test report On Behalf of SANWA LIMITED For Bluetooth Mouse Model No.: GMAERGBT18 FCC ID: 2AMSUERGBT18 Prepared for : SANWA LIMITED Room 1005, 10/F., Tower 2, Silvercord, 30 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1F, B2 Building, Junfeng Zhongcheng Zhizao Innovation Park, Fuhai Street, Bao'an District, Shenzhen City, China Date of Test: Nov. 13, 2018 ~ Nov. 29, 2018 Date of Report: Nov. 30, 2018 Report Number: HK1811221683E

Page 2 of 34 Report No.: HK1811221683E TEST RESULT CERTIFICATION Applicant’s name....................SANWA : LIMITED Room 1005, 10/F., Tower 2, Silvercord, 30 Canton Road, Tsim Sha Tsui, Address.................................... : Kowloon, Hong Kong Manufacture's Name ..............Dongguan : Togran Electronics Co., Ltd. No.262, Shidan Road, The 3rd Industrial Zone, Juzhou, Shijie Town, Dongguan Address....................................City, : Guangdong Province, P.R.China. Factory's Name.......................Dongguan : Togran Electronics Co., Ltd. No.262, Shidan Road, The 3rd Industrial Zone, Juzhou, Shijie Town, Dongguan Address....................................City, : Guangdong Province, P.R.China. Product description Trade Mark ...............................SANWA : Bluetooth Mouse Product name .......................... :: Model and/or type reference .....GMAERGBT18 : FCC Rules and Regulations Part 15 Subpart C Section 15.249 Standards................................ : ANSI C63.10: 2013 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ...............................................: Date (s) of performance of tests .................: Nov. 13, 2018 ~ Nov. 29, 2018 Date of Issue ..............................................: Nov. 30, 2018 Test Result ..................................................: Pass Testing Engineer : (Gary Qian) Technical Manager : (Eden Hu) Authorized Signatory : (Jason Zhou)

Page 3 of 34 Report No.: HK1811221683E Table of Contents Page 1 . TEST SUMMARY 4 2 . GENERAL INFORMATION 5 2.1 GENERAL DESCRIPTION OF EUT 5 2.2 OPERATION OF EUT DURING TESTING 6 2.3 DESCRIPTION OF TEST SETUP 7 2.4 MEASUREMENT INSTRUMENTS LIST 8 3. RADIATED EMISSION 9 3.1. MEASUREMENT PROCEDURE 9 3.2. TEST SETUP 11 3.3. TEST RESULT 12 4. BAND EDGE EMISSION 16 4.1. MEASUREMENT PROCEDURE 16 4.2 TEST SETUP 16 4.3 RADIATED TEST RESULT 17 5. BANDWIDTH 21 5.1. MEASUREMENT PROCEDURE 21 5.2. TEST SETUP 21 5.3. TEST RESULT 22 6. FCC LINE CONDUCTED EMISSION TEST 24 6.1. LIMITS OF LINE CONDUCTED EMISSION TEST 24 6.2. BLOCK DIAGRAM OF LINE CONDUCTED EMISSION TEST 24 6.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST 25 6.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST 25 6.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST 25 APPENDIX A: PHOTOGRAPHS OF TEST SETUP 26 APPENDIX B: PHOTOGRAPHS OF EUT 28

Page 4 of 34 Report No.: HK1811221683E 1. TEST SUMMARY 1.1 TEST PROCEDURES AND RESULTS FCC RULES DESCRIPTION OF TEST RESULT §15.249&15.209 Radiated Emission Compliant §15.249&15.209 Band Edges Emission Compliant §15.215 20dB bandwidth Compliant §15.207 Conducted Emission N/A Note: N/A means it’s not applicable to this item. 1.2 TEST FACILITY Test Firm : Shenzhen HUAK Testing Technology Co., Ltd. Address : 1F, B2 Building, Junfeng Zhongcheng Zhizao Innovation Park, Fuhai Street, Bao'an District, Shenzhen City, China Designation Number: : CN1229 Test Firm Registration Number : 616276 1.3 MEASUREMENT UNCERTAINTY Measurement Uncertainty Conducted Emission Expanded Uncertainty = 2.23dB, k=2 Radiated emission expanded uncertainty(9kHz-30MHz) = 3.08dB, k=2 Radiated emission expanded uncertainty(30MHz-1000MHz) = 4.42dB, k=2 Radiated emission expanded uncertainty(Above 1GHz) = 4.06dB, k=2

Page 5 of 34 Report No.: HK1811221683E 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Operation Frequency 2.402 GHz to 2.480GHz Maximum field strength 90.26dBuV/m(Peak)@3m Bluetooth Version V3.0 Modulation GFSK Number of channels 79 for BR Antenna Gain -4dBi Antenna Designation PCB Antenna Hardware Version V1.0 Software Version V1.0 Power Supply DC 1.5V by battery Note: 1. The EUT only support GFSK. 2. The EUT is power supplied by AAA battery. BR channel List Frequency Band Channel Number Frequency 0 2402MHZ 1 2403MHZ : : 38 2440 MHZ 2400~2483.5MHZ 39 2441 MHZ 40 2442 MHZ : : 77 2479 MHZ 78 2480 MHZ

Page 6 of 34 Report No.: HK1811221683E 2.2 OPERATION OF EUT DURING TESTING NO. TEST MODE DESCRIPTION 1 Low channel GFSK 2 Middle channel GFSK 3 High channel GFSK Note: 1. Only the data of the worst case recorded in the test report. 2. For Radiated Emission, 3axis were chosen for testing for each applicable mode.

Page 7 of 34 Report No.: HK1811221683E 2.3 DESCRIPTION OF TEST SETUP Configure 1: (Normal hopping) EUT Configure 2: (Control continuous TX) EUT Control box PC Item Equipment Mfr/Brand Model/Type No. Remark 1 Bluetooth Mouse SANWA GMAERGBT18 EUT 2 Battery NANFU AAA A.E 3 PC APPLE A1465 A.E 4 Control box GZUT N/A A.E 5 USB Cable N/A 1m unshielded A.E

Page 8 of 34 Report No.: HK1811221683E 2.4 MEASUREMENT INSTRUMENTS LIST TEST EQUIPMENT OF RADIATED EMISSION TEST Lab Cal. Item Equipment Manufacturer Model No. Equipment Last Cal. Interval No. 1. Spectrum analyzer Agilent N9020A HKE—048 Dec. 28, 2017 1 Year 2. Preamplifier Schwarzbeck BBV 9743 HKE—006 Dec. 28, 2017 1 Year L Rohde & 3. EMI Test Receiver ESCI7 HKE—010 Dec. 28, 2017 1 Year Schwarz Bilog Broadband 4. Schwarzbeck VULB9163 HKE—012 Dec. 28, 2017 1 Year Antenna 5. Loop Antenna Schwarzbeck FMZB 1519 B HKE—014 Dec. 28, 2017 1 Year 6. Horn Antenna Schewarzbeck 9120D HKE—013 Dec. 28, 2017 1 Year Broad—band Horn 7. A—INFOMW LB—180400—KF HKE—031 Dec. 28, 2017 1 Year Antenna 8. Pre—amplifier EMCI EMCO51845SE HKE—015 Dec. 28, 2017 1 Year 9. Pre—amplifier Agilent 83051A HKE—016 Dec. 28, 2017 1 Year Filter 10. Micro—tronics 087 —— N/A N/A (2.4—2.483GHz) 11. Radiation Cable 1 MXT HK1 RO5 N/A N/A 12. Radiation Cable 2 MXT HK1 RO6 N/A N/A

Page 9 of 34 Report No.: HK1811221683E 3. RADIATED EMISSION 3.1. MEASUREMENT PROCEDURE 1. The EUT was placed on the top of the turntable 0.8 or 1.5 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 4. For each suspected emissions, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 5. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth under Maximum Hold Mode. 6. For emissions above 1GHz, use 1MHz VBW and RBW for peak reading. Then 1MHz RBW and 10Hz VBW for average reading in spectrum analyzer. Place the measurement antenna away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. The measurement antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. The final measurement antenna elevation shall be that which maximizes the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane. 7. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum values. 8.If the emissions level of the EUT in peak mode was 3 dB lower than the average limit specified, then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions which do not have 3 dB margin will be repeated one by one using the quasi-peak method for below 1GHz. 9. For testing above 1GHz, the emissions level of the EUT in peak mode was lower than average limit (that means the emissions level in peak mode also complies with the limit in average mode), then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions will be measured in average mode again and reported. 10. In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the recorded data should be QP measured by receiver. High - Low scan is not required in this case.

Page 10 of 34 Report No.: HK1811221683E The following table is the setting of spectrum analyzer and receiver. Spectrum Parameter Setting Start ~Stop Frequency 9KHz~150KHz/RBW 200Hz for QP Start ~Stop Frequency 150KHz~30MHz/RBW 9KHz for QP Start ~Stop Frequency 30MHz~1000MHz/RBW 120KHz for QP 1GHz~26.5GHz Start ~Stop Frequency 1.5MHz/5MHz for Peak, 1.5MHz/10H2z for Average Receiver Parameter Setting Start ~Stop Frequency 9KHz~150KHz/RBW 200Hz for QP Start ~Stop Frequency 150KHz~30MHz/RBW 9KHz for QP Start ~Stop Frequency 30MHz~1000MHz/RBW 120KHz for QP Test limit for Standard FCC15.249 Fundamental Frequency Field Strength of Fundamental Field Strength of Harmonics {millivolts/meter) {microvolts/meter) 900—928MHz 50 500 2400—2483.5MHz 50 500 5725—5875MHz 50 500 24.0—24.25GHz 250 2500 Test limit for Standard FCC 15.209 Frequency Distance Field Strengths Limit (MHz) Meters u_ V/m dB(pV)/m 0.009 ~ 0.490 300 2400/F(kHz) 0.490 ~ 1.705 30 24000/F(kHz) 1.705 ~ 30 30 30 30 ~ 88 3 100 40.0 88 ~ 216 3 150 43.5 216 ~ 960 3 200 46.0 960 ~ 1000 3 500 54.0 Above 1000 3 Other:74.0 dB(uV)/m (Peak) 54.0 dB(uV)/m (Average) Remark: (1) Emission level dBu V = 20 log Emission level p V/m (2) The smaller limit shall apply at the cross point between two frequency bands. (3) Distance is the distance in meters between the measuring instrument, antenna and the closest point of any part of the device or system.

Page 11 of 34 Report No.: HK1811221683E 3.2. TEST SETUP Radiated Emission Test-Setup Frequency Below 30MHz RADIATED EMISSION TEST SETUP 30MHz-1000MHz RADIATED EMISSION TEST SETUP ABOVE 1000MHz

Page 12 of 34 Report No.: HK1811221683E 3.3. TEST RESULT RADIATED EMISSION BELOW 30MHZ No emission found between lowest internal used/generated frequencies to 30MHz. RADIATED EMISSION 30MHz- 1GHZ FOR BR EUT： Bluetooth Mouse Model Name. ： GMAERGBT18 Temperature： 20 ℃ Relative Humidtity： 48% Pressure： 1010 hPa Test Voltage ： DC 1.5V Test Mode ： Mode 1 Polarization : Horizontal Suspected Data List Freq. Level Factor Limit Margin Height Angle NO. Polarity [MHz] [dBμV/m] [dB] [dBμV/m] [dB] [cm] [°] 1 42.6100 21.11 14.56 40.00 18.89 150 358 Horizontal 2 65.8900 19.42 12.54 40.00 20.58 150 44 Horizontal 3 215.270 28.69 12.21 43.50 14.81 100 277 Horizontal 4 263.770 0 28.79 14.00 46.00 17.21 100 305 Horizontal 5 454.860 0 26.08 19.89 46.00 19.92 150 358 Horizontal 6 800.180 0 34.53 26.80 46.00 11.47 100 26 Horizontal 0

Page 13 of 34 Report No.: HK1811221683E EUT： Bluetooth Mouse Model Name. ： GMAERGBT18 Temperature： 20 ℃ Relative Humidtity： 48% Pressure： 1010 hPa Test Voltage ： DC 1.5V Test Mode ： Mode 1 Polarization : Vertical Suspected Data List Freq. Level Factor Limit Margin Height Angle NO. Polarity [MHz] [dBμV/m] [dB] [dBμV/m] [dB] [cm] [°] 1 65.8900 21.65 12.54 40.00 18.35 150 14 Vertical 2 145.430 20.74 14.25 43.50 22.76 150 93 Vertical 3 215.270 0 26.49 12.21 43.50 17.01 100 198 Vertical 4 434.490 0 32.27 19.43 46.00 13.73 200 182 Vertical 5 539.250 0 30.46 21.71 46.00 15.54 100 0 Vertical 6 686.690 0 31.80 24.23 46.00 14.20 150 96 Vertical 0 RESULT: PASS Note: Factor=Antenna Factor + Cable loss, Margin=Result-Limit. The “Factor” value can be calculated automatically by software of measurement system. The mode 1 is the worst case, and only the data of the worst case recorded in this test report. .

Page 14 of 34 Report No.: HK1811221683E FIELD STRENGTH OF FUNDAMENTAL FOR BR EUT： Bluetooth Mouse Model Name. ： GMAERGBT18 Temperature： 20 ℃ Relative Humidtity： 48% Pressure： 1010 hPa Test Voltage ： DC 1.5V Test Modulation ：GFSK Polarization : Horizontal Frequency Meter Reading Factor Emission Level Limits Margin Value Type (MHz) (dBμV) (dB) (dBμV/m) (dBμV/m) (dB) 2402.021 76.80 13.46 90.26 114.00 -23.74 peak 2402.021 68.83 13.46 82.29 94.00 -11.71 AVG 2441.021 75.25 13.88 89.13 114.00 -24.87 peak 2441.021 67.34 13.88 81.22 94.00 -12.78 AVG 2480.021 74.20 14.11 88.31 114.00 -25.69 peak 2480.021 66.30 14.11 80.41 94.00 -13.59 AVG Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier. EUT： Bluetooth Mouse Model Name. ： GMAERGBT18 Temperature： 20 ℃ Relative Humidtity： 48% Pressure： 1010 hPa Test Voltage ： DC 1.5V Test Modulation ：GFSK Polarization : Vertical Frequency Meter Reading Factor Emission Level Limits Margin Value Type (MHz) (dBμV) (dB) (dBμV/m) (dBμV/m) (dB) 2402.021 76.36 13.46 89.82 114.00 -24.18 peak 2402.021 68.32 13.46 81.78 94.00 -12.22 AVG 2441.021 74.85 13.88 88.73 114.00 -25.27 peak 2441.021 66.79 13.88 80.67 94.00 -13.33 AVG 2480.021 73.73 14.11 87.84 114.00 -26.16 peak 2480.021 65.79 14.11 79.90 94.00 -14.10 AVG Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier.

Page 15 of 34 Report No.: HK1811221683E RADIATED EMISSION ABOVE 1GHZ FOR BR EUT： Bluetooth Mouse Model Name. ： GMAERGBT18 Temperature： 20 ℃ Relative Humidtity： 48% Pressure： 1010 hPa Test Voltage ： DC 1.5V Test Mode ： Mode 1 Polarization : Horizontal Frequency Meter Reading Factor Emission Level Limits Margin Value Type (MHz) (dBμV) (dB) (dBμV/m) (dBμV/m) (dB) 4804.026 42.56 7.12 49.68 74 -24.32 peak 4804.026 39.51 7.12 46.63 54 -7.37 AVG 7206.039 38.24 9.84 48.08 74 -25.92 peak 7206.039 35.68 9.84 45.52 54 -8.48 AVG Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier. EUT： Bluetooth Mouse Model Name. ： GMAERGBT18 Temperature： 20 ℃ Relative Humidtity： 48% Pressure： 1010 hPa Test Voltage ： DC 1.5V Test Mode ： Mode 1 Polarization : Vertical Frequency Meter Reading Factor Emission Level Limits Margin Value Type (MHz) (dBμV) (dB) (dBμV/m) (dBμV/m) (dB) 4804.026 42.87 7.12 49.99 74 -24.01 peak 4804.026 37.65 7.12 44.77 54 -9.23 AVG 7206.039 36.36 9.84 46.2 74 -27.8 peak 7206.039 34.12 9.84 43.96 54 -10.04 AVG Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier. Note: Other emissions from 8G to 25 GHz are considered as ambient noise. No recording in the test report. Factor=Antenna Factor + Cable loss - Amplifier gain, Margin=Measurement-Limit. The “Factor” value can be calculated automatically by software of measurement system. The GFSK modulation was the worst case and only the data of worst recorded in this report.

Page 16 of 34 Report No.: HK1811221683E 4. BAND EDGE EMISSION 4.1. MEASUREMENT PROCEDURE 1. The EUT operates at hopping-off test mode. The lowest or highest channels are tested to verify the largest transmission and spurious emissions power at the continuous transmission mode. 2. Max hold the trace of the setup 1, and the EUT operates at hopping-on test mode to verify the largest spurious emissions power. 3. Set the spectrum analyzer in the following setting in order to capture the lower and upper band-edges of the emission. Start frequency(MHz) Stop frequency(MHz) 2200 2405 2478 2500 4.2 TEST SETUP RADIATED EMISSION TEST SETUP

Page 17 of 34 Report No.: HK1811221683E 4.3 RADIATED TEST RESULT FOR BR (Worst modulation: GFSK) TEST PLOT OF BAND EDGE FOR LOW CHANNEL-Horizontal

Page 18 of 34 Report No.: HK1811221683E TEST PLOT OF BAND EDGE FOR LOW CHANNEL -Vertical

Page 19 of 34 Report No.: HK1811221683E TEST PLOT OF BAND EDGE FOR HIGH CHANNEL -Horizontal

Page 20 of 34 Report No.: HK1811221683E TEST PLOT OF BAND EDGE FOR HIGH CHANNEL-Vertical RESULT: PASS Note: Factor=Antenna Factor + Cable loss - Amplifier gain, Over=Measure-Limit. The “Factor” value can be calculated automatically by software of measurement system. Hopping on mode and Hopping off mode have been tested, but only worst case reported.

Page 21 of 34 Report No.: HK1811221683E 5. BANDWIDTH 5.1. MEASUREMENT PROCEDURE 1. The EUT was placed on the top of the turntable 1.5 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2, Set the EUT Work on the operation frequency individually. 3. Set Span = approximately 2 to 5 times the OBW, centered on a hoping channel The nominal IF filter bandwidth (3 dB RBW) shall be in the range of 1% to 5% of the OBW and video bandwidth (VBW) shall be approximately 3* RBW; Sweep = auto; Detector function = peak 4. Set SPA Trace 1 Max hold, then View. 5.2. TEST SETUP

Page 22 of 34 Report No.: HK1811221683E 5.3. TEST RESULT TEST ITEM 20DB BANDWIDTH TEST MODULATION GFSK for BR Test Data (MHz) Criteria Low Channel 1.143 PASS Middle Channel 1.133 PASS High Channel 1.132 PASS TEST PLOT OF BANDWIDTH FOR LOW CHANNEL

Page 23 of 34 Report No.: HK1811221683E TEST PLOT OF BANDWIDTH FOR MIDDLE CHANNEL TEST PLOT OF BANDWIDTH FOR HIGH CHANNEL

Page 24 of 34 Report No.: HK1811221683E 6. FCC LINE CONDUCTED EMISSION TEST 6.1. LIMITS OF LINE CONDUCTED EMISSION TEST Maximum RF Line Voltage Frequency Q.P.( dBuV) Average( dBuV) 150kHz~500kHz 66-56 56-46 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Note: 1. The lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz. 6.2. BLOCK DIAGRAM OF LINE CONDUCTED EMISSION TEST

Page 25 of 34 Report No.: HK1811221683E 6.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10 (see Test Facility for the dimensions of the ground plane used). When the EUT is a floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. 2. Support equipment, if needed, was placed as per ANSI C63.10. 3. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10. 4. All support equipments received DC 3V/60Hz power from a LISN, if any. 5. The EUT received DC 5V power from adapter which received DC 3V/60Hz power from a LISN. 6. The test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. 7. Analyzer / Receiver scanned from 150 kHz to 30MHz for emissions in each of the test modes. 8. During the above scans, the emissions were maximized by cable manipulation. 9. The test mode(s) were scanned during the preliminary test. Then, the EUT configuration and cable configuration of the above highest emission level were recorded for reference of final testing. 6.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST 1. EUT and support equipment was set up on the test bench as per step 2 of the preliminary test. 2. A scan was taken on both power lines, Line 1 and Line 2, recording at least the six highest emissions. Emission frequency and amplitude were recorded into a computer in which correction factors were used to calculate the emission level and compare reading to the applicable limit. If EUT emission level was less –2dB to the A.V. limit in Peak mode, then the emission signal was re-checked using Q.P and Average detector. 3. The test data of the worst case condition(s) was reported on the Summary Data page. 6.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST N/A Note: The EUT is power supplied by AAA battery.

Page 26 of 34 Report No.: HK1811221683E APPENDIX A: PHOTOGRAPHS OF TEST SETUP FCC RADIATED EMISSION TEST SETUP

Page 27 of 34 Report No.: HK1811221683E

Page 28 of 34 Report No.: HK1811221683E APPENDIX B: PHOTOGRAPHS OF EUT TOP VIEW OF EUT BOTTOM VIEW OF EUT

Page 29 of 34 Report No.: HK1811221683E FRONT VIEW OF EUT BACK VIEW OF EUT

Page 30 of 34 Report No.: HK1811221683E LEFT VIEW OF EUT RIGHT VIEW OF EUT

Page 31 of 34 Report No.: HK1811221683E VIEW OF EUT (Port) OPEN VIEW OF EUT

Page 32 of 34 Report No.: HK1811221683E INTERNAL VIEW OF EUT-1 INTERNAL VIEW OF EUT-2

Page 33 of 34 Report No.: HK1811221683E INTERNAL VIEW OF EUT-3 Antenna INTERNAL VIEW OF EUT-4

Page 34 of 34 Report No.: HK1811221683E INTERNAL VIEW OF EUT-5 ----END OF REPORT----


Document Created: 2019-08-29 05:32:12
Document Modified: 2019-08-29 05:32:12
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC