RF expo info

FCC ID: 2AMQ6-HAYLOUGT1

RF Exposure Info

Download: PDF
FCCID_4454209

RF Exposure Evaluation Statement Product Name: Haylou-GT1 Model No.：Haylou-GT1 FCC ID：2AMQ6-HAYLOUGT1 1.1 RF Exposure Compliance Requirement 1.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. 1.1.2 Limits The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz 17  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion 1.1.3 EUT RF Exposure Operational Mode: EDR （8-DPSK worst case） Maximum tune-up Power Maximum Peak (dBm) (mW) Tune up Conducted Calculated Exclusion Channel tolerance Output value threshold Power (dB) (dBm) 2402MHZ 1.39 ±1 2.39 1.73 0.54 2441MHz 0.81 ±1 1.81 1.91 0.60 3.0 2480MHz 0.20 ±1 1.20 1.32 0.42 Conclusion: the calculated value ≤3.0, SAR is exempted.


Document Created: 2019-09-20 03:54:46
Document Modified: 2019-09-20 03:54:46
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC