UM

FCC ID: 2AMQ6-GT1

Users Manual

Download: PDF
FCCID_4252734

LSW.137.000001 55×80mm, 70g书纸，单色印,正反面印刷，风琴折 Overview Power-on Stereo Mode Mono Mode Play/pause Skip Track Forward/backward Charging Case Earphones Take out earphones from the case to power on them. Auto pairing: take out both EarBuds from the case Auto pairing: take out one EarBud from the case to When standby, touch the panel to pause/play music. Or touch both panels for 1.5s to power on earphones and they will auto pair with each other in 2 or 3s. power on it. Its LED will soon blink slowly then search Touch the panel on right earbud twice to skip track Note: media player should run in background. (LED glows solid white) when they are not in the case. Earphones will be connectable to cellphone when for Haylou-GT1 R/L on cellphone and tap to connect. forward. white slowly. On cellphone, LED on right EarBud blinks EarBud will auto reconnect to last device in connectivity Touch the panel on left earbud twice to skip track Large Small search for "Haylou-GT1_R" and tap to connect. records, if any. backward. Female LED USB Port Touch the LED glows If earphones fail to be connected to cellphone, please Note: it may take more times for the left EarBud to Touch panel for 1.5s solid white put EarBuds back to the case and repeat the above steps. reconnect. Three-way Calling & Switch Medium EarTips have been assembled in advance. Earphones will auto reconnect to the last device in Manual pairing: manually power on one EarBud. Its Touch the panel twice to answer incoming call from connectivity records, if any. However, you may try large or small ones, if the LED will soon blink white slowly then search for it Voice Assistant phone. if another call is coming in sync , touch the medium ones do not fit you well. Power-off Note: earphones have been setted to factory when shipping out. on cellphone and tap to connect. When standby, triple touch the panel to activate panel to put the first call on hold while activating voice assistant. the second one. Double touch the panel to switch LED Put earphones into the case to power off them. Note: device needs to support voice assistant and between active call and held call. Or touch both panels for 4.5s to power off earphones. How to Charge fast awakening be turned on. (LED glows solid red for 2s). Prior to using, please peel off sticker on the pogo pins Switch Audio Output Touch the and top up the earphones. When calling, touch the panel for 1s to switch audio panel for 1.5s Touch three times output between earphones and cellphone. Touch the LED glows to power on panel for 4.5s solid red for 2s Pogo LED Haylou-GT1_R Factory Setting Answer/End Call Haylou-GT1_R Pins Touch Pane Ignore Call Haylou-GT1_R If earphones do not function well, please refer the Haylou-GT1_R Please keep Mic Double touch the panel to answer incoming call and following steps to reset factory: take EarBuds out outside when calling Touch the panel for 1s to ignore incoming call. double touch the panel again to end it. from the case. Power off the earphones then toch both panels for about 15s ( LED will blink red and What's in the Box Sticker Haylou-GT1 Manual pairing: manually power on two EarBuds and white three times twice). After that, put them back to they will auto pair with each other when LED blinks white the case. Delete connectivity record on cellphone before TWS BT Earphones BT earphones, Charging case, EarTips × 2 pairs, When calling, adjust Mic towards mouth to gain Touch for promptly. Then LED on the right EarBud will blink white Touch twice processing another pairing. (All connectivity records Manual Manual, Charging cable. clear calling. 1s slowly and now you can tap it on cellphone to connect. relating to the EarBuds will all be removed ) 1 2 3 4 5 6 7 Basic Parameters Warranty Card Tips Hazardous substances and their 5 WEEE FCC Warning contents in the item Operation range: 10m(with no obstacle) Warranty Period 1. Before using the headset, please read the manual All products bearing this symbol are waste This device complies with Part 15 of the FCC Rules. the equipment off and on, the user is encouraged Battery capacity: 43mAh(single EarBud) 12 months after the next day receiving this item. carefully and keep it for future references. Hazardous Substances EU Declaration of Conformity electrical and electronic equipment (WEEE Operation is subject to the following two conditions: to try to correct the interference by one or more Changing time: approx. 1.5hr 2. The headset need to be fully charged prior to Part Name（Pb）（Hg）（Cd） Hereby, Liesheng Inc., declares that the radio Free exchange service will not be accessed under （Cr(VI)） （PBB） （PBDE） as in directive 2012/19/EU) which should not (1) this device may not cause harmful interference, of the following measures: Calling time: approx. 3.5hr first-time use. equipment type LYEJ05LM is in compliance with following circumstances： be mixed with unsorted household waste. and (2) this device must accept any interference -- Reorient or relocate the receiving antenna. Standby time: approx. 150hr 3. If the headset is left unused for over two weeks, Main body Directive 2014/53/EU. The full text of the EU Instead, you should protect human health and the received, including interference that may cause -- Increase the separation between the equipment Input parameter: 5V 100mA 1. Damages caused unauthorized disassembly. please recharge it periodically. declaration of conformity is available at the Battery environment by handing over your waste equipment undesired operation. Changes or modifications and receiver. Battery type: li-ion 2. Defects or physical damages caused by leaking or 4. Please use the chargers made by qualified following internet address: Ear tips to a designated collection point for the recycling of not expressly approved by the party responsible -- Connect the equipment into an outlet on a Wireless connection: BT 5.0 dropping off. manufacturer. 5. If the headset cannot be found by your phone, http:// waste electrical and electronic equipment, appointed for compliance could void the user’s authority to circuit different from that to which the receiver Charging case 3. Damages by act of God.Supposing your item is Accessories please check whether it is in pairing mode; if left by the government or local authorities. Correct operate the equipment. This equipment has been is connected. within any damages or defects except the above Charging cable Input parameter:5V 500mA unconnected for a long while, the headset will exit In addition, for a portable sound system, the disposal and recycling will help prevent potential tested and found to comply with the limits for a -- Consult the dealer or an experienced radio/TV circumstances, please return to us or your distributor Output parameter:5V 150mA pairing mode, please re-enter the mode; if a procedure instructions shall include a warning that excessive negative consequences to the environment and Class B digital device, pursuant to Part 15 of the technician for help. for free repairing. This form is made by SJ/T 11364 regulation. Charging time: approx. 2hr error of your phone occurs, reboot it; if a procedure O：means that hazardous substance content in the sound pressure from earphones and headphones human health. Please contact the installer or local FCC Rules. These limits are designed to provide Standby time: approx. 4 months error of the headsetoccurs, reboot or reset it. homogeneous materials of this part is within the limits of can cause hearing loss. authorities for more information about the location reasonable protection against harmful interference Battery capacity: 310mAh GB/T 26572 regulation. as well as terms and conditions of such collection in a residential installation. This equipment generates, Battery type: li-ion X ：means that hazardous substance content in, at least, one points. uses and can radiate radio frequency energy and, certain homogeneous material of this part is beyond the CAUTION if not installed and used in accordance with the Caveats Address: Suite 1303, 1305 and 1306, 13/F, Project Phrase 2 of Gaosheng Tech Tower, Gaosheng Tech Park, limits of GB/T 26572 regulation. RISK OF EXPLOSION IF BATTERY IS REPLACED instructions, may cause harmful interference to radio BY AN INCORRECT TYPE. communications. However, there is no guarantee 1. Never disassemble or modify your headset for any No.5 Longxi Road, Zhouxi Community, Nancheng reasons to avoid any damages and danger. District, Dongguan City, Guangdong, China. Notes: Please arrange using time properly as your that interference will not occur in a particular hearing may be damaged by using the device for a DISPOSE OF USED BATTERIES ACCORDING installation. If this equipment does cause harmful 2. Do not store the headset in extreme temperatures TO THE INSTRUCTIONS Manufacturer: Dongguan Liesheng Electronic long time. interference to radio or television reception, (under 0℃ or over 45℃). Co., Ltd. which can be determined by turning 3. Avoid using the indicator close to the eyes of Web: www.haylou.com To prevent possible hearing damage, do not children or animals. 4. Do not use this headset during a thunderstorm to avoid listen at high volume levels for long periods. Perform standard: Q/LS 1-2018 FCC ID: 2AMQ6-GT1 irregular function and increased risk of electricshock. Made In China 5. Do not use harsh chemicals or strong detergents to clean the headset. 6. Keep the headset dry. 8 9 10 13 14 15 16 17 K:80 K:100


Document Created: 2019-04-25 17:06:07
Document Modified: 2019-04-25 17:06:07
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC