User manual

FCC ID: 2AMQ6-AD1

Users Manual

Download: PDF
FCCID_3866772

A 55mm Overview Start-up How to Charge Functions Hold MFB for 2s to power-on and the receiver will auto enter Low battery will be warned by red blinking LED. Power-on Last Number Redial pairing mode(the receiver will auto enter pairing mode upon LED will glow solid red when charging and turn to white Hold MFB for 2s or until LED turns on white for 1s. When standby or playing, any disconnection with current devices). once topped up. double tap MFB. LED LED blinks white LED turns on white promptly for 1s Vol+ Hold Double tap 80mm MFB Holdt Vol- On cellphone, search for "Haylou-AD1" and tap to connect Factory Setting Power-off Mute on/off (once power on the receiver will auto reconnect to the last When charging, hold MFB for 3s or until LED blinks red and Hold MFB for 3s or until LED turns on red for 2s. When calling, double tap MFB to switch mute on/off. device in connectivity records, if any. ) white for 3 times. Female USB Port Earphone Jack Bluetooth LED blinks red and Turn on Bluetooth white for 3 times LED turns on red Visibility Available Devices Bluetooth Dongle Visibility to all Bluetooth devices nearby promptly for 2s Devices name Available Devices Haylou-AD1 Hold Hold Double tap Haylou-AD1 Warning: Using earphones will reduce your perception of User Manual ambient sounds, please do not use them in situations where potential danger exists. Multi-point Connection Three-way Calling & Switch Features Hazardous substances and their Tips contents in the item Answer Call Method 1: Refer How to Connect to build connection with phone1. Tap MFB to answer incoming call from phone1. If another call With British CSR 4.1 chipset, it brings smart 1. Before using the item, please read the manual carefully and Tap MFB to answer incoming call(LED blinks white promptly) On phone1, turn off the connection and the receiver will auto enter is coming from phone2 in sync, tap MFB to put the first call on wireless experience. Hazardous substances keep it for future references. pairing mode. On phone2,search for ""Haylou-AD1"" and tap connect. hold while activate the second call. Double tap MFB to switch 2. The item need to be fully charged prior to first-time use. and tap again to end it. Built-in 100mAh of battery makes the Part Name （Pb）（Hg）（Cd） (Cr(AI)) （PBB） （PBDE） On phone1, search for ""Haylou-AD1"" and tap to finish multi-point between active call and held call. 3. If the item is left unused for over two weeks, please connection. receiver available at any moment. recharge it periodically. Main body Thanks to 3.55mm earphone jack, the receiver 4. Please use the chargers made by qualified manufacturer. Skip Track transfers wired earphone to wireless one. Battery 5. If the item cannot be found by your phone, please check Ear tips whether it is in pairing mode; if left unconnected for a long When playing, hold vol+/- for 1s to skip track forward/ LED blinks white Specifications Accessories while, the item will exit pairing mode,please re-enter the mode; LED blinks white backward. promptly Charging if a procedure error of your phone occurs, reboot it; if a promptly Model：Haylou-AD1 Bluetooth version: V4.1 Cable procedure error of the item occurs, reboot or reset it. Tap Volume up/down Operation range: 10m(with no obstacle) Standby time: approx. 160hr This form is made by SJ/T 11364 regulation. When playing, tap vol+/- to adjust volume. Size: 13 x 58mm Music time: 3 or 5hr means that hazardous substance content in the Caveats Battery type: li-ion Weight: 10.5g homogeneo us materials of this part is within the limits of GB/T 26572 regulation. 1. Never disassemble or modify your item for any reasons to Bluetooth profiles:HFP/HSP/A2DP/AVRCP Play/pause means that hazardous substance content in,at least,one avoid any damages and danger. Battery capacity of earphones：3.7V/100mAh certainhomogeneous material of this part is beyond the 2. Do not store the item in extreme temperatures (under0℃ Method 2: Refer How to Connect to build connection with When playing, tap MFB to pause/play music. Charging input parameter：5V 100mA limits of GB/T 26572 regulation. or over 45℃). Ignore Call (All technical specification shall be subject to practical performance.) phone1. Then hold both vol+ and vol- to enter pairing mode. 3. Avoid using the indicator close to the eyes of children Hold MFB for 1s to ignore incoming call(LED blinks white promptly). On phone2, search for "Haylou-AD1" and tap to connect. Voice Assistant Lifespan: oranimals. On phone1, search for "Haylou-AD1" and tap to finish Aftersales Service & Support 4. Do not use this item during a thunderstorm to avoid irregular multi-point connection. When standby, hold MFB for 1s to activate voice assistant As the booklet states, the eco-lifespan of the item is 5 years function and increased risk of electricshock. Warranty period: while using it in normal ways. During the period,no dangerous 5. Do not use harsh chemicals or strong detergents to clean (like Siri). material will be leaked. The item must be recycled by the local 12 months after you purchase this item. the item. Free service: Supposing any defects caused by quality issues law occur within the warranty period,please take this warranty 6. Keep the item dry. Switch Audio Output For any after-sales service,please contact your local Bluetooth card and purchase receipts to your distributor for free exchange Notes: Please arrange using time properly as your hearing LED service. shopper directly Turn on Bluetooth When calling,hold MFB for 1s to switch audio output between may be damaged by using the device for a long time. Free exchange service will not be accessed under following Visibility Manufacturer: Dongguan Hele Electronics Co., Ltd. Visibility to all Bluetooth devices nearby Available Devices the receiver and cellphone. circumstances: Devices name 1. No warranty card or the repairing label has been broken. Address: Dalingya Industrial Zone, Daojiao Town, Hold for 1s Available Devices Haylou-AD1 2. Damages caused by unauthorized disassembly. Dongguan City, Guangdong Haylou-AD1 3. Defects or physical damages caused by leaking or dropping off. 4. Damages by act of God. Supervisor: Dongguan Liesheng Electronics Co., Ltd. Perform standard: Q/HL 2-2017 URL: www.haylou.com FCC Statement Changes or modifications not expressly -- Reorient or relocate the receiving antenna. approved by the party responsible for -- Increase the separation between the compliance could void the user's authority to equipment and receiver. operate the equipment. -- Connect the equipment into an outlet on a This equipment has been tested and found to circuit different from that to which the receiver comply with the limits for a Class B digital is connected. device, pursuant to Part 15 of the FCC Rules. -- Consult the dealer or an experienced radio/ These limits are designed to provide reasonable TV technician for help protection against harmful interference in a This device complies with part 15 of the FCC residential installation. This equipment generates rules. Operation is subject to the following two uses and can radiate radio frequency energy and, conditions (1)this device may not cause if not installed and used in accordance with the harmful interference, and (2) this device must instructions, may cause harmful interference to accept any interference received, including radio communications. However, there is no interference that may cause undesired guarantee that interference will not occur in a operation. particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:


Document Created: 2018-05-22 18:57:31
Document Modified: 2018-05-22 18:57:31
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC