User Manual

FCC ID: 2AMN3-X10

Users Manual

Download: PDF
FCCID_4315831

X10 Security Precautions Overview of Headset Overview of Headset In order to have a proper and safe use of the headset, Warning: You must use the original cable to charge the Bluetooth Wireless earphones please read this user manual in detail and save it. Overview of X10 wireless earphones: headset, otherwise it may damage the headset. Thus, voltage of charger must be 5V, electric current at 130mA around. USER MANUAL This headset uses a non-detachable built-in rechargeable battery, Be aware of the following guidelines when using in order to prevent damage to the headset, please do not remove your headset: Vol(+) the battery. 1. You should adjust the volume carefully when using the Next Track Power on: headset to prevent hearing damage. Vol(-) Keep pressing the MF button 2s,white light blinks. Previous Track 2. Please stop using the headset in potentially hazardous Pairing Mode: situations to ensure your safety. Light Keep pressing the MF button 5s,white light quick 3. Please avoid using the headset to listen to music, make MF button blinks or receive calls which may cause a distraction while driving. USB Switch off: 4. Put this product and its accessories somewhere out of Keep pressing the MF button 3s,red light will go the reach of children, to avoid a fatal danger caused by for 1s and then out. inappropriate use. Pair your headset with your cell phone： 5. You should keep water from entering the headset, which 1. Keep the distance between the headset and cell phone (or may cause damage to the sound quality or the headset. other devices being connected) within 1 meter. The closer Charger and battery 6. You should avoid turning the volume so high that you can’t the better. 1. Before charging, make sure the headset has been hear anything around you. If you feel a tinnitus or the volume 2. Keep pressing the MF button until the white lights quick switched off. blinks. is too high, please reduce the volume. 2. Plug USB cable into the charging port of headset; 3. Initiate Bluetooth function of cell phone (or other device being 7. Stop using the headset if you feel obvious discomfort, plug the other side of USB cable into the USB charger connected). Then “X10” will be shown on your phone. irritation or have other adverse reactions. or other charging device. Charging will start and the 4. Select “X10” (some cell phones need you to input the 8. The headset should not be stored or used at temperatures PIN “0000” as password) and the headset will automatically red light remains bright on the headset. below -10℃ or above 50℃ which may shorten headset or connect with your cell phone, the white light will be always 3. Charging time of headset takes approximately up to battery life on. 1.5-2hours, the red light will turn white when fully charged Attention: Generally, there is 300 seconds maximum to pair the headset with your cell phone, or the Bluetooth pairing mode will stop when the lights goes out. Please retry steps 1 to 4 to pair again if your operation doesn’t work. 2 3 4 Overview of Headset FAQ FAQ Specification To disconnect the headset with your cell phone: Last call redialling: 6. I cannot hear a sound from your computer or cell phone? Ans: Please check whether the output channel of your computer is Bluetooth, that Specification: Turn off the Bluetooth function of your cell phone. In standby mode, double-click the MF button to redial the Audio Device and Bluetooth function of your computer support A2DP profile. And Bluetooth version: 5.0V. Or keep pressing the MF button until the red light goes your last call. please check that the volume on your headset/computer/cell phone is turned up. Frequency range: 2.4GHz – 2.48GHz on for 1s and then out, to switch off the headset. Music Play/Pause: 7. I cannot use the headset to control the volume, to select a track or APP of my cell phone? Operating distance: up to 10M Or take the headset from the cell phone to more than Press MF button once to play/pause music. Ans: The Software settings of the APP may vary and lead to some functions Standby time: up to 180hrs 10m (30ft）away Volume adjustment/Music selection: of the APP not controlable by the headset. Talking/music-playing time: 10 hours To reconnect the paired headset with your Press Vol(+) and Vol(-) once to adjust volume; keep pressing Charging time: about 1.5-2 hours the Vol(+) and Vol(-) to select previous track or next track. FCC Warning Frequency response: 20-22kHz mobile phone: Operating Temperature:-10°C~50°C 1. Keep the distance of the headset and cell phone (or other Siri function: This device complies with Part 15 of the FCC devices being connected) within 1 meter. The closer the Keep pressing MF button for 2s to launch Siri function. Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and better. (2) this device must accept any interference received, including 2. Switch on the headset, and the headset will enter into interference that may cause undesired operation. reconnection mode when the white light blinks. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 3. Switch on the Bluetooth search function in your cell phone of the FCC Rules. These limits are designed to provide or other devices being connected. Then the headset will FAQ reasonable protection against harmful interference in a automatically reconnect with the mobile phone which has 1.X10 earphones cannot pair with Cell phone? residential installation. This equipment generates, uses and connected last time can radiate radio frequency energy and, if not installed and Ans: Please check whether your headset is in pairing mode or reconnection used in accordance with the instructions, may cause harmful mode and check whether the Bluetooth function in your cell phone is on. Now Answer incoming call: check your device’s Bluetooth menu and delete/forget the headset and reconnect interference to radio communications. However, there is no guarantee that interference will not occur in a particular When there is an incoming call, press the MF button once the headset again as before. installation. If this equipment does cause harmful interference to answer the call, or use your cell phone to answer it. 2.X10 earphones cannot be switched on? to radio or television reception, which can be determined by Ans: Please check the battery status of your headset. turning the equipment off and on, the user is encouraged to Reject a call: 3.Can I change the battery for the headset? try to correct the interference by one or more of the following When there is an incoming call, press the MF button Ans: No, this headset use a built-in non-detachable Li-Polymer battery, it measures: - Reorient or relocate the receiving antenna. cannot be removed. - Increase the separation between the equipment and receiver. twice to reject the call, or use your cell phone to reject -Connect the equipment into an outlet on a circuit different from the call. 4.Can I use headset while driving? Ans: For safety reason, we strongly recommend not to use over-ear headset that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any Hang up a call: to avoid distraction while driving. changes or modifications to this unit not expressly approved Press the MF button once or use your cell phone to hang 5.X10 earphones has disconnected with your cell phone within 10 meters? by the party responsible for compliance could void the user's Ans: Please check if there is metal or other material within a relatively close range authority to operate the equipment. Technical, specifications are subject to change without up your call. which may interfere with the Bluetooth connection. Bluetooth is a radio technology which is sensitive to objects between the headset and the connected device. notice, we apologize for any inconvenience. 5 6 7 8


Document Created: 2019-06-10 17:49:50
Document Modified: 2019-06-10 17:49:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC