RF Exposuer

FCC ID: 2AMLFAT6

RF Exposure Info

Download: PDF
FCCID_4329551

ORLAB REPORT No. : $Z19050138S01 RF EXPOSURE EVALUATION REPORT APPLICANT : Shenzhen Jimi IOT Co.,Ltd PRODUCT NAME : ASSET GPS TRACKER MODEL NAME : ATC BRAND NAME : Jimi FCC ID : 2AMLFATG STANDARD(S) ©. 47CFR 21091 KDB 447498 RECEIPT DATE : 2019—05—14 TEST DATE : 2019—05—15 ISSUE DATE : 2019—05—21 Edited by: Liang Mei (Rapporteur) Approved by: k3 Peng Huarui (Supervisor ) NOTE: This document is issued by MORLAB, the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86—755—36698555 Fax: 86—755—36698525 Mo RLAB FL1—3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http:/www.morlab.cn E—mail: service@morlab.cn Page1of 10

ORLAB! T REPORT No . : 5219050138501 DIRECTORY 1. Technical Information A 1.1 Applicant and Manufacturer Information oA 1.2 Equipment under Test (EUT) Description A 1.3 Identification of all used EUT OU1 1.4 Applied Reference Documents uO 2. Device Category and RF Exposure Limit A 3. RF Output Power _ 4. RF Exposure Evaluation o Annex A General Information puua & SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86—755—36608555 Fax: 86—755—36698525 MORLAB zis Buiting a, Feivang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Hitp:/Awww.morlab.on E—mail: service@morlab.cn Page2of 10

ORLAB! Tw REPORT No. : $Z19050138S01 Change history Version Date Reason of changed 1.0 2019—05—21 First edition SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86—755—36698555 Fax: 86—755—36698525 MO RLAB FL1—3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Hitp:/Awww.morlab.on E—mail: service@morlab.cn Page3of 10

ORLAB! ' REPORT No. : $219050138S01 1. Technical Information Note: Provide by manufacturer. 1.1 Applicant and Manufacturer Information Applicant: Shenzhen Jimi IOT Co.,Ltd 4/F, Building C, Gaoxingi Industrial Park, Liuxian 1st Road, No.67 Applicant Address: Xin‘an Street, Bao‘an District, Shenzhen, China Manufacturer: Shenzhen Jimi IOT Co.,Ltd 4/F, Building C, Gaoxingi Industrial Park, Liuxian 1st Road, No.67 Manufacturer Address: Xin‘an Street, Bao‘an District, Shenzhen, China 1.2 Equipment under Test (EUT) Description EUT Name: ASSET GPS TRACKER Hardware Version: NFC112_V4.0 Software Version: GT370W_30_S1G15U8_D23_RO_VO1_WM_20181115_1136 GSM850: 824.2MHz ~ 848.8MHz GSM1900: 1850.2MHz ~ 19010.8MH2z Frequency Bands: WCDMA Band II: 1852.4MHz ~ 1907.6MHz WCDMA Band V: 826.4MHz ~ 846.6MHz GPRS: GMSK, EDGE: 8PSK Modulation Mode: WCDMA: QPSK Antenna Type: FPC Antenna Antenna Gain: —1.50Bi Note: For a more detailed description, please refer to Specification or User‘s Manual supplied by the applicant and/or manufacturer. SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86—755—36608555 Fax: 86—755—36608525 MO RLAB FL1—3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Hitp:/Awww.morlab.on E—mail: service@morlab.cn Pagedof 10

ORLAB! Tw REPORT No. : $Z19050138S01 1.3 Identification of all used EUT The EUT identity consists of numerical and letter characters, the letter character indicates the test sample, and the following two numerical characters indicate the software version of the test sample. EUT Identity Hardware Version Software Version 1# NFC112_V4.0 GT370W_30_S1G15U8_D23_RO_VO1_WM_20181115_1136 1.4 Applied Reference Documents Leading reference documents for testing: No. Identity Document Title 1 47 CFR§2.1091 Radio Frequency Radiation Exposure Evaluation: mobile devices 2 KDB 447498 DO1v06 General RF Exposure Guidance SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86—755—36608555 Fax: 86—755—36608525 MORLAB zis Buiting a, Feivang Science Park, No.8 LongChang Road, e Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Hitp:/Awww.morlab.on E—mail: service@morlab.cn PageSof 10

ORLAB! ' REPORT No. : $219050138S01 2. Device Category and RF Exposure Limit Per user manual, Based on 47CFR 2.1091, this device belongs to mobile device category with General Population/Uncontrolled exposure. Mobile Devices: 47CFR 2.1091(b) For purposes of this section, a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter‘s radiating structure(s) and the body of the user or nearby persons. In this context, the term "fixed location" means that the device is physically secured at one location and is not able to be easily moved to another location. Transmitting devices designed to be used by consumers or workers that can be easily re—located, such as wireless devices associated with a personal computer, are considered to be mobile devices if they meet the 20 centimeter separation requirement. GENERAL POPULATION / UNCONTROLLED EXPOSURE The general population/uncontrolled exposure limits are applicable to situations in which the general public may be exposed or in which persons who are exposed as a consequence of their employment may not be made fully aware of the potential for exposure or cannot exercise control over their exposure. Members of the general public would come under this category when exposure is not employment—related; for example, in the case of a wireless transmitter that exposes persons in its vicinity. Warning labels placed on low—power consumer devices such as cellular telephones are not considered sufficient to allow the device to be considered under the occupational/controlled category, and the general population/uncontrolled exposure limits apply to these devices. TABLE 1—LIMITS FOR Maximum PERMISSIBLE ExPOSURE (MPE) Frequency Electric field Magnetic field Power Averaging range strength strength density time (MHz) (V/im) (A/m) (mW/em") (minutes) (B) Limits for General Population/Uncontrolled Exposure 0.3—1.34 614 1.63 *(100) 30 1.34—30 B24/t 219 *(180/f) 30 30—300 27.5 0.073 0.2 30 300—1500 — — £1500 30 1500—100,000 — — 1.0 30 f = frequency in MHz* = Plane—wave equivalent power density SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86—755—36608555 Fax: 86—755—36608525 MO RLAB FL1—3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Hitp:/Awww.morlab.on E—mail: service@morlab.cn Page6of 10

ORLAB! ' REPORT No. : $219050138S01 3. RF Output Power <GSM> Burst Average Power Frame—Average Power GSM850 (dBm) Tune—up (dBm) Tune—up TX Channel 128 189 251 Limit 128 189 251 Limit dB dB Frm‘lfi;cy s2a» ssea sass CB" soas ssoa sass CP"" GPRS 1 Txslot 32.24 31.96 32.07 32.50 23.24 22.96 23.07 23.50 GPRS 2 Tx slots 29.84 30.01 30.18 30.50 23.84 24.01 24.18 24.50 GPRS 3 Tx slots 28.72 28.83 28.97 29.00 2446 24.57 24.71 24.74 GPRS 4 Tx slots 26.62 26.67 26.88 27.00 23.62 23.67 23.88 24.00 EDGE 1 Txslot 26.14 26.13 26.24 26.50 1714 1713 17.24 17.50 EDGE 2 Tx slots 25.84 25.85 25.94 26.00 19.84 19.85 19.94 20.00 EDGE 3 Tx slots 24.70 24.58 24.71 25.00 20.44 20.32 20.45 20.74 EDGE 4 Tx slots 21.94 21.99 22.13 22.50 18.94 18.99 19.13 19.50 asM1900 Burst Average Power Frame—Average Power (dBm) Tune—up (dBm) Tune—up TX Channel 512 661 810 Limit 512 661 810 Limit F dBm dBm rm‘lfi;cy 1850.2 1880 190o.8 "CP"" 18502 1880 1909.s CB"" GPRS 1 Txslot 29.66 29.45 29.59 30.00 20.66 20.45 20.59 21.00 GPRS 2 Tx slots 28.45 28.24 27.91 28.50 2245 22.24 21.91 22.50 GPRS 3 Tx slots 26.84 26.59 26.25 27.00 22.58 22.33 21.99 22.74 GPRS 4 Tx slots 24.70 24.47 2416 25.00 21.70 21.47 2116 22.00 EDGE 1 Txslot 25.96 25.93 25.68 26.00 16.96 16.93 16.68 17.00 EDGE 2 Tx slots 25.62 25.53 25.39 26.00 19.62 19.53 19.39 20.00 EDGE 3 Tx slots 23.97 23.95 23.65 25.00 19.71 19.69 19.39 20.74 EDGE 4 Tx slots 21.23 21.14 21.14 21.50 18.23 18.14 18.14 18.50 Note: According to KDB 447498 Section 4.3, SAR test exclusion conditions are based on source—based time—averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune—up tolerance, and the minimum test separation distance required for the exposure conditions. SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86—755—36608555 Fax: 86—755—36608525 MO RLAB FL1—3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Hitp:/Awww.morlab.on E—mail: service@morlab.cn PageTof 10

ORLAB! Tw REPORT No. : $719050138S01 <WCDMA> Band WCDMA 11 WwCbMa v TX Ghannel 9262 9400 assa Y"°UP 4732 aig2 asas "CVP Rx Ghannel gee» asoo 9938 (;g::) 4357 4407 4458 (;g::) Frequency (MHz) 1852.4 1880 1907.6 826.4 836.4 846.6 RMC 12.2Kbps 22.07 21.95 21.96 22.50 22.32 2246 22.24 22.50 HSDPA Subtest1 21.76 21.79 21.91 22.00 21.78 2154 21.57 22.00 HSDPA Subtest? 21.76 21.68 21.87 22.00 21.62 2146 21.4i 22.00 HSDPA Subtest3 21.81 21.84 21.73 22.00 21.57 2144 2141 22.00 HSDPA Subtest4 21.75 21.80 21.66 22.00 21.48 21.36 21.32 21.50 SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86—755—36698555 Fax: 86—755—36698525 MO RLAB FL1—3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BacAn District, Shenzhen , GuangDong Province, P. R. China Hitp/Awww.morlab.on E—mail: service@morlab.cn PageBof 10

ORLAB! «w REPORT No. : $219050138S01 4. RF Exposure Evaluation Standalone transmission evaluation: Antenna Maximum Power Limit for Bands Frequency Gain Tune—u EIRP densit MPE (MH2) . (dBi) (ueeP Limit (dBm) (mw) * (mW/ecm‘) (mW/em‘) GSM 850 848.8 —1.5 24.74 210.863 0.042 0.566 GSM 1900 1850.2 —1.5 22.74 133.045 0.026 1.0 WCDMA Band II 1852.4 —1.5 22.50 125.893 0.025 1.0 WCDMA Band V 836.4 —1.5 22.50 125.893 0.025 0.558 Note: 1. According to KDB 447498, SAR test exclusion conditions are based on source—based time—averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune—up tolerance, and the minimum test separation distance required for the exposure conditions. 2. MPE calculation method Power Density = EIRP/ATR* Where: EIRP = P+G P = QOutput Power (dBm) G = Antenna Gain (dBi) R = Separation Distance (20cm) SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86—755—36698555 Fax: 86—755—36698525 MORLAB FL1—3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BacAn District, Shenzhen , GuangDong Province, P. R. China Hitp/Awww.morlab.on E—mail: service@morlab.cn PageSof 10

ORLAB! «w REPORT No. : $219050138S01 Annex A General Information 1. Identification of the Responsible Testing Laboratory Laboratory Name: Shenzhen Morlab Communications Technology Co., Ltd. Morlab Laboratory Laboratory Address: FL.3, Building A, FeiYang Science Park, No.8 LongChang Road, Block 67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Telephone: +86 755 36698555 Facsimile: +86 755 36698525 2. Identification of the Responsible Testing Location Name: Shenzhen Morlab Communications Technology Co., Ltd. Morlab Laboratory Address: FL.3, Building A, FeiYang Science Park, No.8 LongChang Road, Block 67, BaoAn District, ShenZhen, GuangDong Province, P. R. China MO RLAB §E1EglZé—lul?lft\jllr!\gOARI;:?{;Og!\g\é:gg;gé;fiN&';E&:!;g#;i‘;g:d Ltd. Tel: 86—755—36698555 Fax: 86—755—36698525 Block67, BacAn District, Shenzhen , GuangDong Province, P. R. China Hitp/Awww.morlab.on E—mail: service@morlab.cn Page10of 10


Document Created: 2019-06-24 08:03:27
Document Modified: 2019-06-24 08:03:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC