Test report

FCC ID: 2AMJN-CZ-319

Test Report

Download: PDF
FCCID_4271083

Shenzhen CTL Testing Technology Co., Ltd. Tel: +86—755—89486194 E—mail: cti@ctl—lab.com TEST REPORT 47 CFR FCC Part 15 Subpart C 15.231 Report Reference No. .................: CTL1812198012—WF Compiled by: Happy Guo Hafl)?/ A un ( position+printed name+signature) (File administrators) Tested by: Nice Nong f ( position+printed name+signature) (Test Engineer) Nlce’ Non i Approved by: Ivan Xie ZA sa OA ‘[, ( position+printed name+signature) (Manager) JWW_[ 3( C Product Name..............................: CZ—319.5—DW5Y Model/Type reference .................: CZ—319.5—DW5Y List Model($)...................ccllllll NA Trade Mark .................l.c.clllllcll NA FCC ID ..........ccclcceee 2 2PAMIN—CZ—319 Applicant‘s name ....................: Crorzar LLC Address of applicant .................: 1440 E. Ridge 9 Street #A Washington, Utah 84780 TeSt FIFM ... l Shenzhen CTL Testing Technology Co., Ltd. Floor 1—A, Baisha Technology Park, No.3011, Shahexi Road, Address of Test Firm ... Nanshan District, Shenzhen, China 518055 Test specification ... StanQ&@IQ .. ... .cc mm 47 CFRFCC Part 15 Subpart C 15.231 TRF Origingtor .........c.c.c.c..:. Shenzhen CTL Testing Technology Co., Ltd. Master TRF ........c.c.c.c.ccccl.c. Dated 2011—01 Date of receipt of test item.........: Feb. 21, 2019 Date of sampling .........................: Feb. 22, 2019 Date of Test Date.........................: Feb. 22, 2019—Mar. 29, 2019 Data of Issue...............................: Mar. 29, 2019 ReSUIt...............l.clclc.l22.22.0 Pass Shenzhen CTL Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non—commercial purposes as long as the Shenzhen CTL Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader‘s interpretation of the reproduced material due to its placement and context.

V1.0 Page 2 of 18 Report No.: CTL1812198012—WF TEST REPORT Test Report No. : ctiis12198012.wr |——————_M8h29—2019 _ Equipment under Test : CZ—319.5—DW5Y Model /Type : CZ—319.5—DW5Y Listed Models : N/A Applicant : Crorzar LLC Address i 1440 E. Ridge Street #A Washington, Utah 84780 Manufacturer : Crorzar LLC Address i 1440 E. Ridge Street #A Washington, Utah 84780 Test result Pass * * In the configuration tested, the EUT complied with the standards specified page 5. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the issuing testing laboratory.

V1.0 Page 3 of 18 Report No.: CTL1812198012-WF ** Modified History ** Version Description Issued Data Report No. Remark Version 1.0 Initial Test Report Release 2019-03-29 CTL1812198012-WF Tracy Qi

V1.0 Page 4 of 18 Report No.: CTL1812198012-WF Table of Contents Page 1. SUMMARY............................................................................................................................................................ 5 1.1. TEST STANDARDS.......................................................................................................................................................... 5 1.2. TEST DESCRIPTION ........................................................................................................................................................ 5 1.3. TEST FACILITY .............................................................................................................................................................. 6 1.4. STATEMENT OF THE MEASUREMENT UNCERTAINTY ............................................................................................................... 6 2. GENERAL INFORMATION....................................................................................................................................... 8 2.1. ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 8 2.2. GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 8 2.3. EQUIPMENTS USED DURING THE TEST .............................................................................................................................. 8 2.4. RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................................................ 9 2.5. MODIFICATIONS ........................................................................................................................................................... 9 3. TEST CONDITIONS AND RESULTS ......................................................................................................................... 10 3.1. CONDUCTED EMISSION (AC MAIN) ...............................................................................................................................10 3.2. RADIATED EMISSION ...................................................................................................................................................11 3.3. 20DB BANDWIDTH .....................................................................................................................................................16 3.4. DEACTIVATION TIME ................................................................................................................................................... 17 3.5. ANTENNA REQUIREMENT .............................................................................................................................................18

V1.0 Page 5 of 18 Report No.: CTL1812198012-WF 1. SUMMARY 1.1. Test Standards The tests were performed according to following standards: FCC Rules Part 15.231: Periodic operation in the band 40.66-40.70 MHz and above 70 MHz. ANSI C63.10:2013 : American National Standard for Testing Unlicensed Wireless Devices 1.2. Test Description FCC and IC Requirements FCC Part 15.207 Conducted Emission N/A FCC Part 15.231(a)(2) Automatically Deactivate PASS FCC Part 15.231(b) Electric Field Strength of Fundamental Emission PASS FCC Part 15.205 &15.209& 15.231(b) Electric Field Strength of Spurious Emission PASS FCC Part 15.231(c) -20dB bandwidth PASS Remark: The measurement uncertainty is not included in the test result. New battery was used during testing.

ns parsors moonnoccrimsim anr 13. Testraciny 181. Agwasott wat btormary Shnten Cen retrenyC0. tm Frar t io ids Fab e 0 utmoc anto,Strsvnces chea Te ow n envamatonclne ant on contrmtaie otraha Te TSem norve atirnonsindconors MG C andCorh wlon neuonern 122 Labortoyacerataton Tsty n nsc connd ouin y totagupuceno onsts comsLrer SteutenGN. marr etraby o. it h sn mmundand mc nb ncontane wh ESn Remithoncimalo in ant un tarratie knreaie Coresy es t GaralRpmnond t Gonpaorc o Tareyonmen Lamnorm K9Uiab car. o. asmor strtenGn mairs iebGo, it EUGLatorgay e tonacmato tA noonpoon in ie iila atavea ie anl pelnte in ncon wih ooo Ts MGaralPanranare lt Gonratn l farngonlmen Latomcrncant 1c hagiatonnta: ssten 18ienitr.cnson T onatrous nere con CTL Tsrn TetroboyGa i BC Lateaon ts heo a i mmBeabene montl ncSnoncrapuiinilo n Garson w onraion ce eror arenrorm uit se on n m h rosmgatraton s cccsew DespatonNe cinere snn on, mears metrang o. is taormay n too maumino ns ty cnerees Rawor bsuah e ed fopeallnnrtcrnGonmon To manparc morton e PEX nansmutnouts faquion ons Gwentn mrr 14. Sterient ofthe messuremient uncerilnty Te tant msnn i ccune anvi andcuine The made wcautenc t e ear t oiwt clbimenns o neaxenan ant heires Tho remuenon brameey wn cataad t at remunnarn hiva in e on mean n o Get 1 c a Spedeatoni rato detutane and mnvny eamurry apmate ant notas = Fan t Unatany n BVGen aie doamate e rcra TLYaany matcby on @daimt apon m i BINENiR1e rothemon conpont ns ons ramiin l dre amdrio hi waut may mt n asiond duaen The narvuneh iw mmol orondcontam otte ds Hooatrt ts nesmnontctirT ihoman s nsored Fesmmen *= ncsmun Nez mnupe ce S9C m namnmsensmd =ee m Inierspamssenmen snn se m Gevnetimtems Soue i pmomemmsanom sme m mss Gnezentine iore se m


V1.0 Page 8 of 18 Report No.: CTL1812198012-WF 2. GENERAL INFORMATION 2.1. Environmental conditions During the measurement the environmental conditions were within the listed ranges: Normal Temperature: 25°C Relative Humidity: 55 % Air Pressure: 101 kPa 2.2. General Description of EUT Product Name: CZ-319.5-DW5Y Model/Type reference: CZ-319.5-DW5Y Power supply: DC 3V from battery Modulation: ASK Operation frequency: 319.5MHz Channel number: 1 Antenna type: PCB antenna Antenna gain: 0dBi Note: For more details, please refer to the user’s manual of the EUT. 2.3. Equipments Used during the Test Calibration Calibration Test Equipment Manufacturer Model No. Serial No. Date Due Date 3560.6550.1 LISN R&S ENV216 2018/05/25 2019/05/24 2 LISN R&S ESH2-Z5 860014/010 2018/05/25 2019/05/24 Sunol Sciences Bilog Antenna JB1 A061713 2018/05/25 2019/05/24 Corp. EMI Test Receiver R&S ESCI 1166.5950.03 2018/05/25 2019/05/24 Spectrum Analyzer Agilent E4407B MY41440676 2019/01/19 2020/01/18 Spectrum Analyzer Agilent N9020 US46220290 2019/01/14 2020/01/13 Controller EM Electronics EM 1000 060859 2018/05/21 2019/05/20 Sunol Sciences Horn Antenna DRH-118 A062013 2018/05/25 2019/05/24 Corp. Active Loop Da Ze ZN30900A / 2018/05/25 2019/05/24 Antenna Amplifier Agilent 8449B 3008A02306 2018/05/25 2019/05/24 Amplifier Agilent 8447D 2944A10176 2018/05/25 2019/05/24 Temperature/Humi Gangxing CTH-608 02 2018/05/17 2019/05/16 dity Meter High-Pass Filter micro-tranics HPM50108 G174 2018/05/17 2019/05/16 High-Pass Filter micro-tranics HPM50111 G142 2018/05/17 2019/05/16 Coaxial Cables HUBER+SUHN SUCOFLEX 10m 2018/05/17 2019/05/16

V1.0 Page 9 of 18 Report No.: CTL1812198012-WF ER 104PEA-10M HUBER+SUHN SUCOFLEX 2018/05/17 2019/05/16 Coaxial Cables 3m ER 104PEA-3M HUBER+SUHN SUCOFLEX 2018/05/17 2019/05/16 Coaxial Cables 3m ER 104PEA-3M RF Cable Megalon RF-A303 N/A 2018/05/17 2019/05/16 The calibration interval was one year 2.4. Related Submittal(s) / Grant (s) This submittal(s) (test report) is intended to comply with Section 15.231 of the FCC Part 15, Subpart C Rules. 2.5. Modifications No modifications were implemented to meet testing criteria.

V1.0 Page 10 of 18 Report No.: CTL1812198012-WF 3. TEST CONDITIONS AND RESULTS 3.1. Conducted Emission (AC Main) LIMIT FCC CFR Title 47 Part 15 Subpart C Section 15.207 Limit (dBuV) Frequency range (MHz) Quasi-peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 * Decreases with the logarithm of the frequency. TEST CONFIGURATION TEST PROCEDURE 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. The EUT is a flood stand system; a wooden table with a height of 0.1 meters is used and is placed on the ground plane as per ANSI C63.10-2013. 2. Support equipment, if needed, was placed as per ANSI C63.10-2013 3. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10-2013 4. If a EUT received DC power from the USB Port of Notebook PC, the PC’s adapter received AC120V/60Hz power through a Line Impedance Stabilization Network (LISN) which supplied power source and was grounded to the ground plane. 5. All support equipments received AC power from a second LISN, if any. 6. The EUT test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. 7. Analyzer / Receiver scanned from 150 KHz to 30MHz for emissions in each of the test modes. 8. During the above scans, the emissions were maximized by cable manipulation. TEST RESULTS Not applicable for device which is battery supply.

V1.0 Page 11 of 18 Report No.: CTL1812198012-WF 3.2. Radiated Emission Limit For intentional device, according to 15.209(a) the general requirement of field strength of radiated emission from intentional radiators at a distance of 3 meters shall not exceed the following table. Frequency (MHz) Distance (Meters) Radiated (dBμV/m) Radiated (μV/m) 0.009-0.49 3 20log(2400/F(KHz))+40log(300/3) 2400/F(KHz) 0.49-1.705 3 20log(24000/F(KHz))+ 40log(30/3) 24000/F(KHz) 1.705-30 3 20log(30)+ 40log(30/3) 30 30-88 3 40.0 100 88-216 3 43.5 150 216-960 3 46.0 200 Above 960 3 54.0 500 In addition to the provisions of 15.231(b) and RSS 210-A1.1.2, the field strength of emissions from intentional radiators operated under this section shall not exceed the following: [Where F is the frequency in MHz, the formulas for calculating the maximum permitted fundamental field strengths are as follows: for the band 260-470 MHz, μV/m at 3 meters =41.6667(F) - 7083.3333. The maximum permitted unwanted emission level is 20 dB below the maximum permitted fundamental level.] TEST CONFIGURATION (A) Radiated Emission Test Set-Up, Frequency Below 30MHz (B) Radiated Emission Test Set-Up, Frequency below 1000MHz

V1.0 Page 12 of 18 Report No.: CTL1812198012—WF Ant. feed . point ; | +m io "HT i 4|14 m Eut Aurnctaiie Io.s m Ground Plane Receiver Amp. (C) Radiated Emission Test Set—Up, Frequency above 1000MHz Ant.feed | point 1 (€—————— Bm —————»®] EuT ZTur Taile 1.5m Ground Plane Receiver m Test Procedure 1. Below 1GHz measurement the EUT is placed on a turntable which is 0.8m above ground plane, and above 1GHz measurement EUT was placed on a low permittivity and low loss tangent turn table which is 1.5m above ground plane. Maximum procedure was performed by raising the receiving antenna from 1m to 4m and rotating the turn table from 0°C to 360°C to acquire the highest emissions from EUT And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. Repeat above procedures until all frequency measurements have been completed.

ns rarseis meuirec ensmm restnesuure T onsonston 0ti Gte w nasst potantareane ol tte 1 t nomunt P ol dhaatimi i tn on Sescon ve aento cnanmant nnha evom oe Enssen revensy nesey uns wagn ._..., omen se mss goem cewrn w roo Zetwons se aes sem esn n m Suinca se as ns as n w rmores sion se Ten| Her m i surrorce in #e e e m k urreres ies aa e [[ i urmeres ienss en T68 ine n i Zemwons mss mer en 3e m > S m en ne |Ge n v rmores sn is Tsm n n v Horrores in aa e m w v rerores iess |mis em en on v iuereres iess in Tee ioie s v Ensson |reany|. (2, wiraaoc (R, uns |uage omm S 89— |coog| n ao, Boote| h9 meo remssil mss m arm ae mm |er a sums mss o ane 2s se Bs L larows sn Sm ine =o s |aa i ineows in es ane 65 s o n Haroms iss woes arie mon ssm ase n harore. ienss |aze ane wa sa ons | Ens | ase se one e ee en y sume eve aa ane en ow [we y laeows sn &n ine #e s |we—v ineows: in en ine 62 s Sn |—v aeows ie# mis one S« s as —v inroms ienss wen ane e s 790 v ie 10 Arcentaime vctent mm w mcoom 2. i avarimconeosnonspeat meisootim un ran. nonssen ie on once

V1.0 Page 14 of 18 Report No.: CTL1812198012-WF Duty Cycle= (0.270 *7+0.140*50)/68.20=0.13 AV Factor=20*log(Duty Cycle)=20*log(0.13)=-17.72 (The plot of Duty Cycle See the follow page) (Transmit cycle 68.20ms) (Total Bursts in a transmit cycle 57pcs)

V1.0 Page 15 of 18 Report No.: CTL1812198012-WF (0.270ms burst 7pcs) (0.140ms burst 50pcs)

V1.0 Page 16 of 18 Report No.: CTL1812198012-WF 3.3. 20dB Bandwidth Limit According to 47 CFR 15.231(c) The bandwidth of the emission shall be no wider than 0.25% of the centre frequency for devices operating above 70MHz and below 900MHz. Bandwidth is determined at the points 20dB down from the modulated carrier. Test Configuration Spectrum EUT Analyzer Test Procedure The 20dB bandwidth and 99% bandwidth is measured with a spectrum analyzer connected via a receive antenna placed near the EUT while the EUT is operating in transmission mode. The 20dB bandwidth is defined as the total spectrum the power of which is higher than peak power minus 20dB. The occupied bandwidth (OBW), that is the frequency bandwidth such that, below its lower and above its upper frequency limits, the mean powers radiated are each equal to 0.5 percent of the total mean power radiated by a given emission. Test Results Channel 99% OBW 20dB bandwidth Limit Modulation Frequency Result (KHz) (KHz) (KHz) (MHz) ASK 319.5 7.086 8.267 0.25%*319.50=798.75 Pass Test plot as follows: ASK Modulation

V1.0 Page 17 of 18 Report No.: CTL1812198012-WF 3.4. Deactivation Time Limit According to FCC §15.231(a)(2), A transmitter activated automatically shall cease transmission within 5 seconds after activation. Test Configuration Spectrum EUT Analyzer Test Procedure 1. The EUT was placed on a wooded table which is 0.8m height and close to receiver antenna of spectrum analyzer. 2. The spectrum analyzer resolution bandwidth was set to 1 MHz and video bandwidth was set to 1 MHz to encompass all significant spectral components during the test. The spectrum analyzer was operated in linear scale and zero span mode after tuning to the transmitter carrier frequency. TEST RESULTS Note: The transmitter was automatically activated, and the carrier frequency 433.92MHz: Frequency One transmission time Limit(S) Result (MHz) (S) 319.50 0.390 5 Pass

V1.0 Page 18 of 18 Report No.: CTL1812198012-WF 3.5. Antenna Requirement Standard Applicable According to FCC Part 15C 15.203 a) An intentional radiator shall be de-signed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. b) The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. Refer to statement below for compliance. The manufacturer may design the unit so that the user can replace a broken antenna, but the use of a standard antenna jack or electrical connector is prohibited. Further, this requirement does not apply to intentional radiators that must be professionally installed. Antenna Connected Construction The antenna used in this product is an internal Antenna, The directional gains of antenna used for transmitting is 0 dBi. ********************** End of Report **********************


Document Created: 2019-05-10 16:59:55
Document Modified: 2019-05-10 16:59:55
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC