14_CA099A TestRpt

FCC ID: 2AMH2-CA099A

Test Report

Download: PDF
FCCID_3963738

Page 1 of 13 RF Exposure Report Report No.: AGC00737180729FE01 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless Charger Car Mount BRAND NAME : MPOW MODEL NAME : CA099A CLIENT : MPOW TECHNOLOGY CO., LIMITED DATE OF ISSUE : Jul. 31, 2018 KDB 680106 D01 RF Exposure Wireless Charging Base STANDARD(S) : App v03 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context.

Report No.: AGC00737180729FE01 Page 2 of 13 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 31, 2018 Valid Initial Release

Report No.: AGC00737180729FE01 Page 3 of 13 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY.................................................................................................................. 4 2. GENERAL INFORMATION .............................................................................................................................. 5 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 5 3. DESCRIPTION OF TEST MODES ................................................................................................................... 6 4. SYSTEM TEST CONFIGURATION .................................................................................................................. 6 5. TEST FACILITY ................................................................................................................................................ 7 6. RADIO FREQUENCY (RF) EXPOSURE TEST ............................................................................................... 8 6.1. LIMITS ........................................................................................................................................................ 8 6.2. TEST SETUP.............................................................................................................................................. 8 APPENDIX A: PHOTOGRAPHS OF TEST SETUP .......................................................................................... 11

Report No.: AGC00737180729FE01 Page 4 of 13 1. VERIFICATION OF CONFORMITY Applicant MPOW TECHNOLOGY CO., LIMITED RM 603, 6/F, HANG PONT COMM BLDG 31 TONKIN ST, CHEUNG SHA WAN Address KL, HK,CHINA Manufacturer MPOW TECHNOLOGY CO., LIMITED RM 603, 6/F, HANG PONT COMM BLDG 31 TONKIN ST, CHEUNG SHA WAN Address KL, HK,CHINA Product Designation Wireless Charger Car Mount Brand Name MPOW Test Model CA099A Date of test Jul. 25, 2018 to Jul. 31, 2018 Deviation None Condition of Test Sample Normal Test Result Pass We hereby certify that: The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in KDB 680106 D01. The results of testing in this report apply to the product/system which was tested only. Tested By Steven Zhou(Zhou Pengyun) Jul. 31, 2018 Reviewed By Bart Xie(Xie Xiaobin) Jul. 31, 2018 Approved By Forrest Lei(Lei Yonggang) Jul. 31, 2018 Authorized Officer

Report No.: AGC00737180729FE01 Page 5 of 13 2. GENERAL INFORMATION 2.1. PRODUCT DESCRIPTION A major technical description of EUT is described as following Operation Frequency 146.4KHz Maximum field strength 53.55dBuV/m(Peak)@3m Number of channels 1 Antenna Designation Integrated Antenna (Met 15.203 Antenna requirement) Hardware Version CA099A_V0.2 Software Version V1.0 Power Supply DC5V

Report No.: AGC00737180729FE01 Page 6 of 13 3. DESCRIPTION OF TEST MODES NO. TEST MODE DESCRIPTION 1 Wireless charging Mode(Full load) 2 Wireless charging Mode(half load) 3 Wireless charging Mode(Null load) Note: 1. The mode 1 was the worst case and only the data of the worst case record in this report. 4. SYSTEM TEST CONFIGURATION Item Equipment Model No. ID or Specification Remark 1 Wireless Charger PWC10 2AMH2-CA099A EUT Wireless electronic 2 -- Maximum power 10W Support Load

Report No.: AGC00737180729FE01 Page 7 of 13 5. TEST FACILITY Test Site Attestation of Global Compliance (Shenzhen) Co., Ltd 1-2F., Bldg.2, No.1-4, Chaxi Sanwei Technical Industrial Park, Gushu, Xixiang, Location Bao’an District B112-B113, Bldg.12, Baoan Bldg Materials Center, No.1 of Xixiang Inner Ring Road, Baoan District, Shenzhen 518012 NVLAP LAB CODE 600153-0 Designation Number CN5028 FCC Test Firm 682566 Registration Number Attestation of Global Compliance(Shenzhen) Co., Ltd is accredited by National Description Voluntary Laboratory Accreditation program, NVLAP Code 600153-0 TEST EQUIPMENT LIST Description Manufacturer Model S/N Cal. Date Cal. Due Broadband Field Narda Safety Test NBM-550 J-0004 Jun.12, 2018 Jun.11, 2019 Meter Solutions GmbH Narda Safety Test Probe FHP EHP-50F J-0015 Jun.12, 2018 Jun.11, 2019 Solutions GmbH

Report No.: AGC00737180729FE01 Page 8 of 13 6. RADIO FREQUENCY (RF) EXPOSURE TEST 6.1. LIMITS For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be conducted assuming a user separation distance of 15 cm. E and H field strength measurements or numerical modeling may be used to demonstrate compliance. Measurements should be made from all sides and the top of the primary/client pair, with the 15 cm measured from the center of the probe(s) to the edge of the device. Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63 A/m. 6.2. TEST SETUP Note: Position A: Front of EUT; Position B: Left of EUT; Position C: back of EUT; Position D: Right of EUT; Position E: Top of EUT(15 cm measure distance);

Report No.: AGC00737180729FE01 Page 9 of 13 6.3. TEST PROCEDURE The EUT was placed on a non-conductive table top and the ancillary equipment (e.g. mobile phone) was placed on the EUT for charging. Maximum E-field and H-field measurements were tested 15cm from each side of the EUT. For top side the measure distance is 15cm. Along the side of the EUT to center of E-field probe and H-field probe were positioned at the location to search maximum field strength. 6.4. TEST RESULT Test condition: Mode 1 E-field strength test result: Frequency Probe Probe Probe Probe Probe Limit Range Position A Position B Position C Position D Position E (V/m) (V/m) (V/m) (V/m) (V/m) (V/m) 146.4kHz 0.12 0.89 0.12 0.12 0.12 614 H-field strength test result: Frequency Probe Probe Probe Probe Probe Limit Range Position A Position B Position C Position D Position E (A/m) (A/m) (A/m) (A/m) (A/m) (A/m) 146.4kHz 0.13 0.59 0.13 0.13 0.13 1.63 Test condition: Mode 2 E-field strength test result: Frequency Probe Probe Probe Probe Probe Limit Range Position A Position B Position C Position D Position E (V/m) (V/m) (V/m) (V/m) (V/m) (V/m) 146.4kHz 0.13 0.78 0.13 0.13 0.13 614 H-field strength test result: Frequency Probe Probe Probe Probe Probe Limit Range Position A Position B Position C Position D Position E (A/m) (A/m) (A/m) (A/m) (A/m) (A/m) 146.4kHz 0.13 0.41 0.14 0.14 0.14 1.63

Report No.: AGC00737180729FE01 Page 10 of 13 Test condition: Mode 3 E-field strength test result: Frequency Probe Probe Probe Probe Probe Limit Range Position A Position B Position C Position D Position E (V/m) (V/m) (V/m) (V/m) (V/m) (V/m) 146.4kHz 0.08 0.45 0.08 0.08 0.08 614 H-field strength test result: Frequency Probe Probe Probe Probe Probe Limit Range Position A Position B Position C Position D Position E (A/m) (A/m) (A/m) (A/m) (A/m) (A/m) 146.4kHz 0.12 0.21 0.12 0.12 0.12 1.63

AG °s # n i m Attestation of Global Compliance Report No.: AGC00737180729FEO1 Page 11 of 13 APPENDIX A: PHOTOGRAPHS OF TEST SETUP Position E Position A s 3 & narda * &Al $ n pATE &A causmat The results s‘ oi# thisfes is issued by/KGE, this doctufn t;fittp://www.agc% 0 Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@age—cert.com @ 4100 089 2118 Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

AG °s — I i m Attestation of Global Compliance Report No.: AGC00737180729F E01 Page 12 of 13 Position B Position C | 2; 46 narda a & § 4 The results S}e i virl fii@?})" k is issued by XGE . this doctifash t;fittp://www.agc-g‘?5 0 Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@age—cert.com @ 400 089 2118 Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

AG °s — I i m Attestation of Global Compliance Report No.: AGC00737180729FEO1 Page 13 of 13 Position D remmmseseqtany. 1 sers9eCI narrg,asolmmns'l‘ i | wext caummanon | _ rameniwre \ lyll‘-‘wl\.‘ 19 20 21 22 > ————END OF REPORT———— The results s‘ goir thisyfeat report refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued by/KGE, this doctifad confirmed tfittp://www.agc?% o 3 O %A C_o AttestatiQ f Globa!Q o Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@age—cert.com @ 400 089 2118 Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China


Document Created: 2018-08-13 14:47:46
Document Modified: 2018-08-13 14:47:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC