User Manual

FCC ID: 2AM3K-KEYBOARD

Users Manual

Download: PDF
FCCID_3494756

               WIRELESS KEYBOARD
               MODEL:BL-IBM-WRLKB
一、Product overview:
   1. Low cap streamline design
     2. High quality wireless 2.4G durable power saving keyboard
     3. High quality silver paste film button
     4. Receiver effective distance 12M
     5. Anti-splash structure, elegant modeling, 104 button arrangement
     6. Support XP, win7/win8/Linux/Mac, OS and other operating systems
     7. Compatible with IBM PC/AT/USB2.0
二、 Product function description:
    Standard 3 zone keyboard

三、Electrical specification:
  1. Operating voltage: DC+1.5V error ±0.25V
  2. Low voltage requirement: more than 1V (can work properly)
  3. Operating current: DC+1.5V, < 2.0mA
  4. Output interface: wireless 2.4G, valid distance 12M
  5. Electrical working life: 8 million times
  6. Loss power: <1W
  7. Menbrane:Silver paste Impedance: Less than 1K ohms
  8. IC: CX5176
四、Institution (physical / Mechanical) specifications:
    1. Appearance: see attached drawings
    2. Keyboard size: 442.2*156*23.5
    3. Keyboard main material: BLACK 475
    4. Weight:470 grams
    5. Number of ordinary keys :104KEY
    6. Drawing force:≥1.0kgf
    7. resilience﹕55±10gf
    8. Front stroke :0.9mm±0.5mm
    9. Total stroke of button :4.0mm±0.5mm
    10. Operation mode :RUBBER DOME
    11. Mechanical working life: more than 8 million times


五、Environment condition:
   1. Ambient temperature
      (1). operating:5℃~50℃
      (2). Saving:-20℃~65℃
   2. Relative humidity
      (1). Operating:10%~85% RH           25℃
         (2). Saving:5%~95% RH 25℃
六、Main material performance parameters of keyboard:
    1 Cap: 475 black + white ink +gloss oil
    2 Main performance parameters of conductive film switch
         (1).Maximum permissible current :30VDC、33 mA 10VDC、100mA
         (2).Contact resistance: loop impedance is no more than 800Ω
         (3).Dielectric strength: MAX.100V/DC 50 MΩ above
         (4). Operating pressure for button:50-350g/cm2
         (5).Working environment temperature:-40-55℃
         (6). Service life: more than 8 million times

Installation steps:
Connect Receiver
- For Laptop computer, plug the NANO Receiver into USB interface.
- For Desktop computer, suggest use USB extension cable, let NANO
Receiver work on your working platform to reduce the radiations from
circumstance.
- Connect keyboard.
- Open cell covers of keyboard install batteries according polarity. Close cell
cover.


                °C
O      HESp GHHH 647S\_EJT_;J      _
 JEiii_j%
        %;we%C:_         ?jaye ajaj®!
      OOt            Ei
                      518 %E@m
fig\




      C]JDOIL
            gfijflj%%o       _JJBVEJONO
       yOEEjoOFYGClEij%      o_   [8VOI8 |
”EE




       E_jeN     @_y 5     utyE@H%


      5p5 B05p5 F%g%ég;
OE  NEEETEJWVEJE%_ [E
@\
 5)4;Q@53A 0
 nnnnnn JCJ8]flEfiji (om
~=]
m
          tt——oyryy3zjfub
    |I 2Zijejel   J—IG|GCF
&                 x
               2700




FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.



Document Created: 2017-07-25 11:28:33
Document Modified: 2017-07-25 11:28:33

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC