User Manual

FCC ID: 2ALYU-EP5

Users Manual

Download: PDF
FCCID_4036175

User Manual Introduction Thank you for purchasing our Wearable Digital Video Camera! This camera can be used to shoot videos as wellas take photos. Additionally, it supports TF cards of up to 64GB capacity to extend the memory of the DVRcamera. 1

Product specifications Resolution 1080P/30FPS Video format MOV H.264 Sensor SONY High-sensitivityCMOS DOF 1 Meter to infinity Pixels 8.0 MP Degree 90◦ WIFI Built-in Bluetooth Built-in Microphone Built-in MIC USB Micro USB Battery Built-in 820mAh lithium-ion battery Working voltage 3.7V Working current 300mA 2

External Memory Card Support maximum 64GB TF Card Compatibility Windows XP or above/Mac OSX10.5 or above Size 90*20*25mm Weigh 70g Packing List  High-Definition digital camera  Adjustable head hoop  USB cable  Flexible glue  Wrench  Hook 3

Installation Fix the headband at the Lock the headband and the host by using screw hole of the camera a small wrench and screw Install the soft case on the screw Installation completed 4

Appearance Video touch area Status Indicator Bluetooth touch area 5

Appearance TF Card /Reset USB Power Photo touch area Mic Wrench Head-mounted steel ring Lens Speaker 6

Start using Camcorder Charge the camcorder before first use. How to charge the camcorder. 1. Take out the camcorder and the micro USB cable. 2. Connect the charger or computer and the camcorder with USB cable to start charging. 3. While charging, if the batter is not fully charged, the charging indicator red light will turn on and it will turn off when the charging is completed. Note: When the electricity is too low, the speaker makes "Battery low, please charge timely",use a 5V/1A charger to charge the battery. Install the TF card 1. Open the TF card slot cover. 2. Insert a TF card which is belong to class 10 or higher in the shutdown state, memory card supports maximum 64GB. Insert the TF card following the card symbol direction of the camcorder. 7

3. Format the TF card on the machine: press the camera area for 3 seconds after startup, the green light flashes quickly, the TF card is completely formatted till the green light keeps on, then can be used normally. The formatted memory card in the machine is unnecessary to format again (in order to avoid accidentally deleted the contents of the customer, the formatted memory card can no longer be formatted again on the machine). 4. Cover the card slot cover. Note： 1. Do Not plug in/out the TF card when the camcorder is turned on，otherwise it may damage the TF card or the machine. 2. You need to complete the match with the machine when inserting the new TF card, the speaker makes “Please hold the photo button to format the memory card”,and must format the TF card on the machine first. 3. The speaker sounds “Please insert the memory card” when you didn’t insert the TF card,please insert the memory card according to the remind . Use the camcorder 1. Make sure the batter is fully charged and the TF card is inserted completed before using. 2. Press and hold the power button for 5 seconds to turn on the camcorder, the green will turn on. 3. The camera will enter standby mode after turning on. 8

4. Press the video button to start recording，the green light will flashes during the recording and the speaker sounds “Start recording” ；Press the video button again to stop recording and the green light will stops blinking but keep light on, and the speaker will sounds “Stop recording”. 5. Press the camera button to enter the camera mode and take pictures, the camera will take one picture when each press the button. The green light will flashes once and the speaker will sounds “Taking picture” when taking photo. WiFi 1.When the camcorder is turned on and shooting is not started, press the power button once to turn on/off the WIFI, the orange indicator light will turn on and sounds “WIFI ON /WIFI OFF” . 2.Open the WIFI of your phone, find the WIFI name of your camcorder, enter the password to connect the camcorder. After connection, you can enter the APP to preview the real-time screen. 9

How to use the APP 1.Android users from Baidu applications, 91 applications and Google search LzxViewer market to download the application and install it to your mobile phone. Apple users can search from the App Srore LzxViewer to download the application and install it on your smart mobile phone. IOS/Android Google play 10

2.Open the WIFI of your phone and search nearby WIFI, select the corresponding WIFI of the machine and enter the password. Mobiel Set Up WLAN WLAN Select... other... 3.Enter the APP LzxViewer to preview the real-time screen. Note：WiFI name defaults to prefix EP5+SSID, the initial password is 12345678 . 4.The three buttons in the bottom of the camera can be used to switch the three modes of : Playback, video, 11

photo; When you press the video button which is in red, the word "REC" will appears in the upper right corner of the preview screen and the orange light will flashes to indicate that the recording starts; Press the camera button to switch to the photo mode, when you press the yellow button, the preview screen will flash and the orange light flashes, which means the camera has been completed. 5.Press the setting icon & on the upper right corner, you can set the parameters of the camcorder: Video resolution, camera resolution, exposure value, memory card capacity view, memory card format, WIFI name/password modification, automatic shutdown settings, factory settings, Software version view. 6.Turn off the WIFI, press the power button, the orange light switch to green light, which indicates that the WIFI function has been turned off, and switched to standby mode. NOTE: The machine can be connected to the APP and preview then the camcorder is lack of TF card, but can not enter the settings, if you want to enter the settings, please turn off the power and insert a TF card, then turn on the power and enter the APP to do operation. Bluetooth 1. Touch the Bluetooth button for 5s, the machine will sounds "Bluetooth on,ready prepare‘ and the blue light flashes. 2. Turn on the Bluetooth of your phone and search nearby Bluetooth devices. Name EP5 will be displayed in 12

the list of available devices, pair the Bluetooth of your phone and the camcorder, the camcorder will sounds “Device connected” while the blue light slowly blinks when the connection is successful. 3. When playing music, press the Bluetooth button once to pause playback, press the button again to continue the play, press and hold for 3 s to dial the latest call log number. 4. Touch the Bluetooth button for 5s to turn off, the machine will sounds “Bluetooth off” and shutdown ,the blue light will turn off and the same time. How to connect the device When the camera connect with PC ,when it turn on ,will sounds “Please select the USB function and press the video button to enter the removable disk mode and press the photo button to enter the Pc-cam mode” 1. USB Mode：Connect the camera to the computer via USB cable. Press the power button to boot and then touch the video button, the speaker will sounds a “Enter the removable disk mode” sound which indicates that has entered the removable disk mode, then you can view/download the files of your camcorder. 2. PCCAM Mode：Connect the camera to the computer via USB cable. Press the camera button, the speaker will issued a “Enter the Pc-cam mode” sound which indicates that has enter the PCCAM mode, it can be used for remote video. Restore to factory settings Long press the camera area for more than 10 seconds to restore the factory settings, during the process, the 13

status light will flash rapidly, accompanied by rapid warning tone;Status light stops flashing and switch to steady, after resetting the factory settings, it will sounds “Factory setting has been restored,”the camera name is reset to model EP5 + SN, the WIFI password is reset to 12345678. 14

Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 15

—Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Before a new model device is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each device are performed in positions and locations as required by the FCC. Non-compliance with the above restrictions may result in violation of RF exposure guidelines. 16


Document Created: 2018-10-15 16:51:46
Document Modified: 2018-10-15 16:51:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC