RF Exposure

FCC ID: 2ALS8-NT9527

RF Exposure Info

Download: PDF
FCCID_3471799

             CERPASS TECHNOLOGY (SUZHOU)CO., LTD                              Report No.: SEDL1706203




                            FCC/ IC TEST REPORT
                                      According to
                       FCC CFR Title 47 Part 15 Subpart C (15.247)

     Applicant         :    Ninebot (Changzhou) Tech Co., Ltd.
                            16F-17F, Block A, Building 3, Changwu Mid Road 18#, Wujin Dist.,
     Address           :
                            Changzhou, Jiangsu, China
     Manufacturer :         Ninebot (Changzhou) Tech Co., Ltd.
                            16F-17F, Block A, Building 3, Changwu Mid Road 18#, Wujin Dist.,
     Address           :
                            Changzhou, Jiangsu, China
     Equipment         :    Ninebot KickScooter
     Model No.         :    ES1,ES2,ES4
     Trade Name        :    Ninebot by Segway
     FCC ID            :    2ALS8-NT9527
     IC ID             :    22636-NT9527
     Test Period       :    Jun.28,2017~ Jun.30, 2017


     The test result refers exclusively to the test presented test model / sample.,
     Without written approval of Cerpass Technology (Suzhou) Co.,Ltd. the test report shall not be
    reproduced except in full.
     The EUT is also considered as a kind of computer peripheral, because the connection to computer
    is necessary for typical use. It has been verified to comply with the requirements of FCC Rules and
    Regulations Part 15. The test report has been issued separately.
     The test report must not be used by the clients to claim product certification approval by NVLAP or
    any agency of the Government.
                                                  Laboratory Accreditation:
     Prepared By:
                                                  Cerpass Technology Corporation Test Laboratory
                                                    NVLAP LAB Code:                200954-0
                                                    TAF LAB Code:                  1439
     Kerry Zhou
     Approved by:
                                                  Cerpass Technology (SuZhou) Co., Ltd.
                                                    NVLAP LAB Code:                200814-0
                                                    CNAS LAB Code:                 L5515
     Miro Chueh (EMC/RF Manager)



                                                                                                      h
Cerpass Technology (Suzhou) Co., Ltd                                           Issued Date : Jul.12 ,2017
Report format Revision 01                                                      Page No.    : 1 of 4


           CERPASS TECHNOLOGY (SUZHOU)CO., LTD                          Report No.: SEDL1706203


 Radio Frequency Exposure
 LIMIT

 For 2.4G Band: According to §15.247(i), systems operating under the provisions of this section shall
 be operated in a manner that ensures that the public is not exposed to radio frequency energy levels
 in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter.




                                                                                                 h
Cerpass Technology (Suzhou) Co., Ltd                                      Issued Date : Jul.12 ,2017
Report format Revision 01                                                 Page No.    : 2 of 4


           CERPASS TECHNOLOGY (SUZHOU)CO., LTD                            Report No.: SEDL1706203


 EUT Specification
  EUT                            Media IP Phone
  Frequency band
                                       BT3.0: 2.402GHz ~ 2.480GHz
  (Operating)
                                       Portable (<20cm separation)
  Device category
                                       Mobile (>20cm separation)
                                       Occupational/Controlled exposure (S = 5mW/cm2)
  Exposure classification              General Population/Uncontrolled exposure
                                       (S=1mW/cm2)
                                       Single antenna
                                       Multiple antennas
  Antenna diversity                    Tx diversity
                                       Rx diversity
                                       Tx/Rx diversity
  Max. output power for
                                 BT4.1: -14.697 dBm (0.000034W)
  2.4G Band
  Antenna gain (Max)             -1.26 dBi for 2.4G Band
                                       MPE Evaluation*
  Evaluation applied                   SAR Evaluation
                                       N/A
 Remark:
 1. The maximum output power is -14.697dBm (0.000034W) at 2402MHz (with numeric 0.75antenna
    gain.) for2.4G band
 2. DTS device is not subject to routine RF evaluation; MPE estimate is used to justify the compliance.
 3. For mobile or fixed location transmitters, no SAR consideration applied. The maximum power
    density is 1.0 mW/cm2 even if the calculation indicates that the power density would be larger.
 *Note: Simultaneous transmission is not applicable for this EUT.




                                                                                                    h
Cerpass Technology (Suzhou) Co., Ltd                                         Issued Date : Jul.12 ,2017
Report format Revision 01                                                    Page No.    : 3 of 4


            CERPASS TECHNOLOGY (SUZHOU)CO., LTD                              Report No.: SEDL1706203


 TEST RESULTS FOR 2.4G BAND


 No non-compliance noted.

 Calculation
                   30  P  G       E2
 Given      E                & S
                       d           3770
            Where     E = Field strength in Volts / meter
                      P = Power in Watts
                      G = Numeric antenna gain
                      d = Distance in meters
                      S = Power density in milliwatts / square centimeter
 Combining equations and re-arranging the terms to express the distance as a function of the
 remaining variables yields:
                 30  P  G
            S
                  3770d 2

 Changing to units of mW and cm, using:

            P (mW) = P (W) / 1000 and
            d (cm) = d(m) / 100
 Yields
                 30  P / 1000  G           PG
            S                        0.0796  2         Equation 1
                  3770  d / 100
                                   2
                                                d

            Where
               d = Distance in cm
               P = Power in mW
               G = Numeric antenna gain
               S = Power density in mW / cm2
 Maximum Permissible Exposure

                                  Max. Conducted
   Modulation       Frequency                        Antenna      Distance    Power density      Limit
                                      output
     Mode           band (MHz)                       gain (dBi)     (cm)        (mW/cm2)       (mW/cm2)
                                   power(dBm)

      BLE           2402-2480          -14.70          -1.26        20          0.000005                  1




                                                                                                      h
Cerpass Technology (Suzhou) Co., Ltd                                          Issued Date : Jul.12 ,2017
Report format Revision 01                                                     Page No.     : 4 of 4



Document Created: 2017-07-12 15:54:08
Document Modified: 2017-07-12 15:54:08

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC