2ALS8-NB9675_User-Manual

FCC ID: 2ALS8-NB9675

Users Manual

Download: PDF
FCCID_4209397

G30 User Manual The manufacturer reserves the right to make changes to the product, release firmware updates, and update this manual at any time. Visit www.segway.com or check the Segway-Ninebot App to download the latest user materials. You must install the Segway-Ninebot App, activate your KickScooter, and obtain the latest updates and safety instructions. www.segway.com Original Instructions V1.0

Contents Thanks for choosing the Ninebot KickScooter Max! 1 Riding Safety 02 Thanks for choosing the Ninebot KickScooter Max (hereinafter referred to as KickScooter)! Your KickScooter is a fashionable transportation device with mobile app, allowing you to connect with 2 Packing List 04 other riders. 3 Diagram 05 Enjoy your ride and connect with riders worldwide! 4 Assembling Your KickScooter 06 5 First Ride 07 6 Charging 08 7 Learning to Ride 08 8 Warnings 10 9 Folding and Carrying 14 10 Maintenance 15 11 Specifications 16 12 Certifications 17 13 Trademark and Legal Statement 19 14 Contact 20 01

9. Be alert! Scan both far ahead and in front of your KickScooter — your eyes are your best tool for safely avoiding 1 Riding Safety obstacles and low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice). 1. The KickScooter is a recreational product. Before mastering riding skills, you need to practice. Neither Ninebot Inc. 10. To reduce risk of injury, you must read and follow all “CAUTION” and “WARNING” notices in this document. Do not (means Ninebot (Beijing) Tech Co., Ltd. and its subsidiaries and affiliates) nor Segway Inc. is responsible for any ride at an unsafe speed. Under no circumstance should you ride on roads with motor vehicles. The manufacturer injuries or damage caused by a rider's inexperience or failure to follow the instructions in this document. recommends riders be 14+ years old. Always follow these safety instructions: 2. Please understand that you can reduce the risk by following all the instructions and warnings in this manual, but A. People who should not ride the KickScooter include: you cannot eliminate all the risks. Remember that whenever you ride the KickScooter you risk injury from loss of i. Anyone under the influence of alcohol or drugs. control, collisions, and falls. When entering into public spaces always comply with the local laws and regulations. As ii. Anyone who suffers from disease that puts them at risk if they engage in strenuous physical activity. with other vehicles, faster speeds require longer braking distance. Sudden braking on low traction surfaces could iii. Anyone who has problems with balance or with motor skills that would interfere with their ability to maintain lead to wheel slip, or falls. Be cautious and always keep a safe distance between you and other people or vehicles when riding. Be alert and slow down when entering unfamiliar areas. balance. iv. Anyone whose weight is outside the stated limits (see Specifications). 3. Always wear a helmet when riding. Use an approved bicycle or skateboard helmet that fits properly with the chin v. Pregnant women. strap in place, and provides protection for the back of your head. B. Riders under the age of 18 years old should ride under adult supervision. 4. Do not attempt your first ride in any area where you might encounter children, pedestrians, pets, vehicles, bicycles, C. Comply with local laws and regulations when riding this product. Do not ride where prohibited by local laws. or other obstacles and potential hazards. D. To ride safely, you must be able to clearly see what is in front of you and you must be clearly visible to others. 5. Respect pedestrians by always yielding the right of way. Pass on the left whenever possible. When approaching a E. Do not ride in the snow, in the rain, or on roads which are wet, muddy, icy, or that are slippery for any reason. Do pedestrian from the front, stay to the right and slow down. Avoid startling pedestrians. When approaching from not ride over obstacles (sand, loose gravel, or sticks). Doing so could result in a loss of balance or traction and behind, announce yourself and slow down to walking speed when passing. Please obey local traffic laws and could cause a fall. regulations if situation is different. 11. Do not attempt to charge your KickScooter if it, the charger, or the power outlet is wet. 6. In places without laws comply with the safety guidelines outlined in this manual. Neither Ninebot Inc. nor Segway Inc. is responsible for any property damage, personal injury/death, accidents, or legal disputes caused by violations 12. As with any electronic device, use a surge protector when charging to help protect your KickScooter from damage of the safety instructions. due to power surges and voltage spikes. Only use the Segway supplied charger. Do not use a charger from any other different product models. 7. Do not allow anyone to ride your KickScooter on his/her own unless they have carefully read this manual and followed the New Rider Tutorial in the App. The safety of new riders is your responsibility. Assist new riders until 13. Use only Ninebot or Segway approved parts and accessories. Do not modify your KickScooter. Modifications to they are comfortable with the basic operation of the KickScooter. Make sure each new rider wears a helmet and your KickScooter could interfere with the operation of the KickScooter, could result in serious injury and/or other protective gear. damage, and could void the Limited Warranty. 8. Before each ride check for loose fasteners and damaged components. If the KickScooter makes abnormal sounds or signals an alarm, immediately stop riding. Diagnose your KickScooter via the Segway-Ninebot App and call your dealer/distributor for service. 02 03

2 Packing List 3 Diagram Accelerator Handle Mainframe Scooter Bell Control Panel & Power Button Brake Lever Handlebar Headlight User Materials Stem USER MANUAL QUICK START LIMITED WARRANTY Quick Release Lever Folding Mechanism Battery Compartment Front Fork Buckle Wheel Motor Mudguard Accessories Brake Light Disc Brake M5 Flathead Screw x 6 Hex Wrench Power Cord Battery Charger Charging Port (On the other side) Kickstand (one extra) (Sold Separately) Control Panel & Power Button Speedometer: Display the current speed of the scooter, as well as to display error codes. Modes: Three riding modes available. "ECO" for Energy Saving mode (top speed 15 km/h, smooth throttle, suitable for When unpacking your KickScooter, please verify that the above items are included in the package. If you are missing any beginners), "D" for Standard mode (top speed 20 km/h) and "S" for Sport mode (top speed 25 km/h, powerful, only recommended for skilled riders). components, please contact your dealer/distributor or nearest service center (see contacts in the user manual). After Bluetooth: The icon indicates that the scooter has been successfully connected to the mobile device. verifying that all components are present and in good condition, you can assemble your new KickScooter. Error: The wrench icon indicates that the scooter has detected an error. Please retain the box and packaging materials in case you need to ship your KickScooter in the future. Battery Level: The battery power is indicated by 5 bars, each representing approximately 20 % of a full battery. Remember to power off your KickScooter and unplug the charge cable before assembling, mounting accessories, or Power Button: Press the button to turn the scooter on, and press and hold the button for 2 seconds to turn the scooter off. When cleaning the mainframe. the scooter is on, press the button to turn the headlight on/off, and double press to switch between modes. 04 05

4 Assembling Your KickScooter 5 First Ride There are safety risks when learning to ride the KickScooter. You must read the Safety Instructions via the App before your first ride. 1. Fold the handlebar stem up and fasten 2. Firmly connect the wires inside the For your safety, your new KickScooter is not activated and will beep occasionally after it. Then unfold the kickstand to support handle and the stem. Slide the handle Power ON. the scooter. onto the stem. Be aware of the correct Until activated, the KickScooter maintains a very low riding speed, and can not be orientation. ridden with full function. Install the App on your mobile device (with Bluetooth 4.0 or above), connect to the KickScooter with Bluetooth, and follow the App instructions to activate your KickScooter and enjoy the full performance. Scan the QR code to download the App (iOS 8.0 or above, Android™ 4.3 or above). Head Light toward front 1 Install the App and register/login. 2 Power on the KickScooter. A blinking Bluetooth icon indicates the KickScooter is waiting for a connection. 3. Install six screws (three on each side) 4. Verify that your KickScooter powers on with the included hex wrench. and off. 3 Click “Vehicle”→“Scan for Vehicle” to connect to your KickScooter. The KickScooter will beep when the connection is successful. The Bluetooth icon will stop Vehicle Fans Moments Discover Me blinking and remain illuminated. 4 Follow the App instructions to active the KickScooter and learn how to ride safely. You can now start to use your KickScooter, check the status with App, and interact with other users. Have fun! 06 07

6 Charging Charging step tips Charge port (On the other side) Open the charge Insert the Close the charge port cover. charge plug. port cover when finished. 2. Stand on the footrest with one foot 3. Put your other foot on the footrest to keep and push off with your foot to start both feet stable. Press the throttle on right WARNING gliding. hand to speed up when you are balanced. Do not charge if the charge port or charge cable is wet. Note, For your safety, the motor will not Do not charge or use your battery if it is damaged or see trace of water. engage until the scooter reachs 1.8 mph Close the charge port cover when not charging. (3 km/h). 7 Learning to Ride 4. Slow down by releasing the throttle; stir 5. To turn, shift your body weight and the brake handle thumb shifter quickly turn the handle slightly. and stamp the fender with foot at the same time to trigger mechanical braking in order to make a sharp brake. WARNING 1. Power on the scooter and check the Wear an approved helmet and other protective indicator lamp power level. Charge the When braking rapidly you risk serious injury due to loss of traction and falls. Maintain a moderate gear to minimize any possible injury. scooter if the battery level is low. speed and look out for potential hazards. 08 09

8 Warnings WARNING Failure to follow these instructions could lead to serious injury. DO NOT press the throttle when Avoid contacting obstacles with the walking with the scooter. tire/wheel. DO NOT ride the DO NOT ride over speed bumps, thresholds, or other scooter in the rain. bumps at HIGH SPEED. DO NOT get wet. DO NOT carry heavy objects on DO NOT ride the scooter with the handlebar. only one foot. Watch your head when Watch your speed when traveling downhill. Use passing through doorways. both brakes together when traveling at high speed. 10 11

DO NOT touch the hub motor after DO NOT take your hands off the DO NOT ride on public roads, DO NOT rotate the handle violently riding because it can get hot. handlebar while riding. Do not ride motorways, or highways. while driving at high speed. with one hand only. DO NOT ride up and down stairs or jump over obstacles. DO NOT ride through puddles or The KickScooter is for one rider other bodies of water deeper only. Do not carry any passengers. than 1 inch (2 cm). Do not carry a child. Do not ride when pregnant. WARNING Always keep both hands on the handlebar or you risk serious injury due to loss of balance and falls. 12 13

9 Folding and Carrying 10 Maintenance Safety Hook Cleaning and Storage Use a soft, wet cloth to wipe the mainframe clean. Hard to remove dirt can be scrubbed with a toothbrush and toothpaste, then cleaned with a soft, wet cloth. NOTE Do not wash your KickScooter with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the appearance and internal structure of your KickScooter. Do not wash your KickScooter with a power washer or hose. WARNING Folding Open Make sure the KickScooter is powered OFF, the charging cable is unplugged, and the rubber cap on the charge port is tightly sealed before cleaning; otherwise you may damage the electronic components. Store your KickScooter in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to sunlight Turn off your KickScooter. Turn the Align the bell and the buckle Disengage the bell lever from and temperature extremes (both hot and cold) will accelerate the aging process of the plastic components and may safety hook counterclockwise and and hook them. the buckle. Fold the handlebar reduce battery life. open the quick release lever. stem up, close the quick release Battery Pack Maintenance lever and turn the safety hook Do not store or charge the battery at temperatures outside the stated limits (see Specifications). Do not puncture the clockwise. battery. Refer to your local laws and regulations regarding battery recycling and/or disposal. A well maintained battery can perform well even after many miles of riding. Charge the battery after each ride and avoid draining the battery completely. When used at room temperature (70°F [22°C]) the battery range and performance is at its best; whereas using it at temperatures below 32°F (0°C) can decrease range and performance. Typically, at -4°F (-20°C) range can be half that of the same battery at 70°F (22°C). Battery range will recover when temperature rises. More details are available in the App. NOTE Typically, a fully charged battery should retain charge for 120-180 days. A low-power battery should retain charge for 30-60. Remember to charge the battery after each use. Completely draining the battery may cause permanent damage to the battery. Electronics inside the battery record the charge-discharge condition of the battery; damage caused by over-charging or under-charging will not be covered by the Limited Warranty. WARNING Do not attempt to disassemble the battery. Do not touch battery contacts. Do not dismantle or puncture the casing. Keep the battery contacts away from metal objects to prevent short circuit. Risk of fire. No user serviceable parts. Do not charge or use your battery if it is damaged or see trace of water. Carrying WARNING Do not ride when the ambient temperature is outside the machine operation temperature (see Specifications) because When your KickScooter is folded up, simply lift it by the stem to carry. low/high temperature will limit the maximum power/torque. Doing so could cause personal injury or property damage due to slips or falls. 14 15

11 Specifications 12 Certifications Item G30 Federal Communications Commission (FCC) Compliance Statement for USA Unfold: Length x Width x Height 40x17x45 in (102×43×113 cm) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device Dimensions Fold: Length x Width x Height 45x17x13 in (113×43×32 cm) may not cause harmful interference, and (2) this device must accept any interference received, including interference Weight Net Approx. 40 lbs (18 kg) that may cause undesired operation. Payload 55.1–265 lbs (25–120 kg) Rider Recommended Age 14+ years NOTE Required Height 3’11”–6’6” (120–200 cm) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the Max. Speed 15.5 mph (25 km/h) FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Typical Range [1] 31 miles (50 km) installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in Max. Slope 20% accordance with the instructions, may cause harmful interference to radio communications. However, there is no Machine Parameters asphalt/flat pavement; obstacles < 0.4 in (1 cm); Traversable Terrain guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to gaps < 1.2 in (3 cm) radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try Operating Temperature 14–104°F (-10–40°C) to correct the interference by one or more of the following measures: Storage Temperature -4–122°F (-20–50°C) IPX5 —Reorient or relocate the receiving antenna. IP Rating Duration of Charging 9~10 h —Increase the separation between the equipment and receiver. Nominal Voltage 36.8 VDC —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Max. Charging Voltage 42 VDC —Consult the dealer or an experienced radio/TV technician for help. Battery Charging Temperature 32–104°F (0–40°C) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Nominal Capacity 540 Wh Over-heating, short circuit, over-current and over-charge Industry Canada (IC) Compliance Statement for Canada Battery Management System protection This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following two Number Of Batteries 1 conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including Nominal Power 350 W Motor interference that may cause undesired operation of the device. Max. Power 700 W Output Power 121 W CAN ICES-3 (B)/NMB-3(B) Charger Input Voltage 100–240V ～ 50/60Hz Output Voltage 42 VDC “Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. Output Current 2.9 A L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) Shock Absorber front & rear l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en Brake Light LED rear light compromettre le fonctionnement." Features Riding Modes Speed limit mode, Standard mode and Sport mode Neither Segway Inc. nor Ninebot is responsible for any changes or modifications not expressly approved by Segway Inc. or Ninebot. Such modifications could void the user's authority to operate the equipment. [1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 11.2 mph (18 km/h) on average on pavement. 16 17

Ninebot KickScooter Max (model G30) Restriction of Hazardous Substances (RoHS) Directive FCC ID: 2ALS8-NB9676 IC: 22636-NB9676 This Ninebot (Changzhou) Tech Co., Ltd. product, with included parts (cables, cords, and so on) meets the Important WEEE information requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment “RoHS ( recast”or“RoHS 2”). Radio Equipment Directive WEEE Disposal and Recycling Information Correct Disposal of this product. This marking indicates that this product should not be disposal with other household wastes through out the EU. Segway Europe BV, Hogehilweg 8, 1101 CC Amsterdam, The Netherlands. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsible to Hereby, Ninebot (Changzhou) Tech Co., Ltd, declares that the wireless equipment listed in this section are in compliance promote the sustainable reuse of materials resources. To return your used device, please use the return and collection with the essential requirements and other relevant provisions of Directive 2014/53/EU. systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. Frequency Band(s) 2.4000-2.4835GHz Bluetooth Max. RF Power 100mW Battery recycling information for the European Union Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC and amendment 13 Trademark and Legal Statement 2013/56/EU concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Ninebot is the registered trademark of Ninebot (Tianjin) Tech. Co., Ltd; Segway and the Rider Design are the registered Union. This label is applied to various batteries to indicate that the battery is not to be thrown away, but rather reclaimed trademarks of Segway Inc.; Android, Google Play are trademarks of Google Inc., App Store is a service mark of Apple Inc., upon end of life per this Directive. The respective owners reserve the rights of their trademarks referred to in this manual. In accordance with the European Directive 2006/66/EC and amendment 2013/56/EU, batteries and accumulators are The KickScooter is covered by relevant patents. For patent information go to http://www.segway.com. labeled to indicate that they are to be collected separately and recycled at end of life. The label on the battery may also include a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for cadmium). We have attempted to include descriptions and instructions for all the functions of the KickScooter at the time of Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted municipal waste, but printing. However, due to constant improvement of product features and changes of design, your KickScooter may differ use the collection framework available to customers for the return, recycling, and treatment of batteries and accumula- slightly from the one shown in this document. Visit the Apple App Store (iOS) or the Google Play Store (Android) to download and install the App. tors. Customer participation is important to minimize any potential effects of batteries and accumulators on the environment and human health due to the potential presence of hazardous substances. Please note that there are multiple Segway and Ninebot models with different functions, and some of the functions mentioned herein may not be applicable to your unit. The manufacturer reserves the right to change the design and Before placing electrical and electronic equipment (EEE) in the waste collection stream or in waste collection facilities, functionality of the KickScooter product and documentation without prior notice. the end user of equipment containing batteries and/or accumulators must remove those batteries and accumulators for separate collection. © 2019 Ninebot (Beijing) Tech Co. Ltd. All rights reserved. 18 19

14 Contact Contact us if you experience issues relating to riding, maintenance and safety, or errors/faults with your KickScooter. Americas: Segway Inc. 14 Technology Drive, Bedford, NH 03110, USA Tel: 1-603-222-6000 Fax: 1-603-222-6001 Toll Free: 1-866-473-4929 E-mail Sales: customeroperation@segway.com E-mail Service: technicalsupport@segway.com Website: www.segway.com Europe, Middle East and Africa: Segway Europe B.V. Hogehilweg 8, 1101CC Amsterdam, The Netherlands Website: www.segway.com Have your KickScooter serial number on hand when contacting Segway. You can find your serial number on the underside of your KickScooter or in the App under More Settings –> Basic Information. 20 21

成型尺寸 140*140 mm 纸箱类 ±3mm 图示 展开尺寸 aaa*bbb*ccc mm 公差 标签类 ±0.5 mm 280mm 裁切线 140mm 图纸方向 印刷方向 （无特殊说明下） 说明书类 ±1 mm G30 压线 0~20 cm ±2 mm 20~50 cm ±3 mm 模切方向 面纸方向 PE袋类 50~100cm ±5 mm 反压线 User Manual 140mm 齿刀线 x/x mm The manufacturer reserves the right to make changes to the product, release firmware updates, 开槽 and update this manual at any time. Visit www.segway.com or check the Segway-Ninebot App to download the latest user materials. You must install the Segway-Ninebot App, activate your KickScooter, and obtain the latest updates and safety instructions. www.segway.com V1.0 Original Instructions 粘合区域 Contents Thanks for choosing the Ninebot KickScooter Max! 1 Riding Safety 02 Thanks for choosing the Ninebot KickScooter Max (hereinafter referred to as KickScooter)! Your KickScooter is a fashionable transportation device with mobile app, allowing you to connect with 2 Packing List 04 other riders. 3 Diagram 05 Enjoy your ride and connect with riders worldwide! 4 Assembling Your KickScooter 06 5 First Ride 07 6 Charging 08 7 Learning to Ride 08 8 Warnings 10 9 Folding and Carrying 14 10 Maintenance 15 11 Specifications 16 12 Certifications 17 13 Trademark and Legal Statement 19 14 Contact 20 01 9. Be alert! Scan both far ahead and in front of your KickScooter — your eyes are your best tool for safely avoiding 1 Riding Safety obstacles and low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice). 1. The KickScooter is a recreational product. Before mastering riding skills, you need to practice. Neither Ninebot Inc. 10. To reduce risk of injury, you must read and follow all “CAUTION” and “WARNING” notices in this document. Do not (means Ninebot (Beijing) Tech Co., Ltd. and its subsidiaries and affiliates) nor Segway Inc. is responsible for any ride at an unsafe speed. Under no circumstance should you ride on roads with motor vehicles. The manufacturer injuries or damage caused by a rider's inexperience or failure to follow the instructions in this document. recommends riders be 14+ years old. Always follow these safety instructions: 2. Please understand that you can reduce the risk by following all the instructions and warnings in this manual, but A. People who should not ride the KickScooter include: you cannot eliminate all the risks. Remember that whenever you ride the KickScooter you risk injury from loss of i. Anyone under the influence of alcohol or drugs. control, collisions, and falls. When entering into public spaces always comply with the local laws and regulations. As ii. Anyone who suffers from disease that puts them at risk if they engage in strenuous physical activity. with other vehicles, faster speeds require longer braking distance. Sudden braking on low traction surfaces could iii. Anyone who has problems with balance or with motor skills that would interfere with their ability to maintain lead to wheel slip, or falls. Be cautious and always keep a safe distance between you and other people or vehicles when riding. Be alert and slow down when entering unfamiliar areas. balance. iv. Anyone whose weight is outside the stated limits (see Specifications). 3. Always wear a helmet when riding. Use an approved bicycle or skateboard helmet that fits properly with the chin v. Pregnant women. strap in place, and provides protection for the back of your head. B. Riders under the age of 18 years old should ride under adult supervision. 4. Do not attempt your first ride in any area where you might encounter children, pedestrians, pets, vehicles, bicycles, C. Comply with local laws and regulations when riding this product. Do not ride where prohibited by local laws. or other obstacles and potential hazards. D. To ride safely, you must be able to clearly see what is in front of you and you must be clearly visible to others. 5. Respect pedestrians by always yielding the right of way. Pass on the left whenever possible. When approaching a E. Do not ride in the snow, in the rain, or on roads which are wet, muddy, icy, or that are slippery for any reason. Do pedestrian from the front, stay to the right and slow down. Avoid startling pedestrians. When approaching from not ride over obstacles (sand, loose gravel, or sticks). Doing so could result in a loss of balance or traction and behind, announce yourself and slow down to walking speed when passing. Please obey local traffic laws and could cause a fall. regulations if situation is different. 11. Do not attempt to charge your KickScooter if it, the charger, or the power outlet is wet. 6. In places without laws comply with the safety guidelines outlined in this manual. Neither Ninebot Inc. nor Segway Inc. is responsible for any property damage, personal injury/death, accidents, or legal disputes caused by violations 12. As with any electronic device, use a surge protector when charging to help protect your KickScooter from damage of the safety instructions. due to power surges and voltage spikes. Only use the Segway supplied charger. Do not use a charger from any other different product models. 7. Do not allow anyone to ride your KickScooter on his/her own unless they have carefully read this manual and followed the New Rider Tutorial in the App. The safety of new riders is your responsibility. Assist new riders until 13. Use only Ninebot or Segway approved parts and accessories. Do not modify your KickScooter. Modifications to they are comfortable with the basic operation of the KickScooter. Make sure each new rider wears a helmet and your KickScooter could interfere with the operation of the KickScooter, could result in serious injury and/or other protective gear. damage, and could void the Limited Warranty. 8. Before each ride check for loose fasteners and damaged components. If the KickScooter makes abnormal sounds or signals an alarm, immediately stop riding. Diagnose your KickScooter via the Segway-Ninebot App and call your dealer/distributor for service. 02 03 2 Packing List 3 Diagram Accelerator Handle Mainframe Scooter Bell Control Panel & Power Button Brake Lever Handlebar Headlight User Materials Stem USER MANUAL QUICK START LIMITED WARRANTY Quick Release Lever Folding Mechanism Battery Compartment Front Fork Buckle Wheel Motor Mudguard Accessories Brake Light Disc Brake M5 Flathead Screw x 6 Hex Wrench Power Cord Battery Charger Charging Port (On the other side) Kickstand (one extra) (Sold Separately) Control Panel & Power Button Speedometer: Display the current speed of the scooter, as well as to display error codes. Modes: Three riding modes available. "ECO" for Energy Saving mode (top speed 15 km/h, smooth throttle, suitable for When unpacking your KickScooter, please verify that the above items are included in the package. If you are missing any beginners), "D" for Standard mode (top speed 20 km/h) and "S" for Sport mode (top speed 25 km/h, powerful, only recommended for skilled riders). components, please contact your dealer/distributor or nearest service center (see contacts in the user manual). After Bluetooth: The icon indicates that the scooter has been successfully connected to the mobile device. verifying that all components are present and in good condition, you can assemble your new KickScooter. Error: The wrench icon indicates that the scooter has detected an error. Please retain the box and packaging materials in case you need to ship your KickScooter in the future. Battery Level: The battery power is indicated by 5 bars, each representing approximately 20 % of a full battery. Remember to power off your KickScooter and unplug the charge cable before assembling, mounting accessories, or Power Button: Press the button to turn the scooter on, and press and hold the button for 2 seconds to turn the scooter off. When cleaning the mainframe. the scooter is on, press the button to turn the headlight on/off, and double press to switch between modes. 04 05 4 Assembling Your KickScooter 5 First Ride There are safety risks when learning to ride the KickScooter. You must read the Safety Instructions via the App before your first ride. 1. Fold the handlebar stem up and fasten 2. Firmly connect the wires inside the For your safety, your new KickScooter is not activated and will beep occasionally after it. Then unfold the kickstand to support handle and the stem. Slide the handle Power ON. the scooter. onto the stem. Be aware of the correct Until activated, the KickScooter maintains a very low riding speed, and can not be orientation. ridden with full function. Install the App on your mobile device (with Bluetooth 4.0 or above), connect to the KickScooter with Bluetooth, and follow the App instructions to activate your KickScooter and enjoy the full performance. Scan the QR code to download the App (iOS 8.0 or above, Android™ 4.3 or above). Head Light toward front 1 Install the App and register/login. 2 Power on the KickScooter. A blinking Bluetooth icon indicates the KickScooter is waiting for a connection. 3. Install six screws (three on each side) 4. Verify that your KickScooter powers on with the included hex wrench. and off. 3 Click “Vehicle”→“Scan for Vehicle” to connect to your KickScooter. The KickScooter will beep when the connection is successful. The Bluetooth icon will stop Vehicle Fans Moments Discover Me blinking and remain illuminated. 4 Follow the App instructions to active the KickScooter and learn how to ride safely. You can now start to use your KickScooter, check the status with App, and interact with other users. Have fun! 06 07 6 Charging Charging step tips Charge port (On the other side) Open the charge Insert the Close the charge port cover. charge plug. port cover when finished. 2. Stand on the footrest with one foot 3. Put your other foot on the footrest to keep and push off with your foot to start both feet stable. Press the throttle on right WARNING gliding. hand to speed up when you are balanced. Do not charge if the charge port or charge cable is wet. Note, For your safety, the motor will not Do not charge or use your battery if it is damaged or see trace of water. engage until the scooter reachs 1.8 mph Close the charge port cover when not charging. (3 km/h). 7 Learning to Ride 4. Slow down by releasing the throttle; stir 5. To turn, shift your body weight and the brake handle thumb shifter quickly turn the handle slightly. and stamp the fender with foot at the same time to trigger mechanical braking in order to make a sharp brake. WARNING 1. Power on the scooter and check the Wear an approved helmet and other protective indicator lamp power level. Charge the When braking rapidly you risk serious injury due to loss of traction and falls. Maintain a moderate gear to minimize any possible injury. scooter if the battery level is low. speed and look out for potential hazards. 08 09 8 Warnings WARNING Failure to follow these instructions could lead to serious injury. DO NOT press the throttle when Avoid contacting obstacles with the walking with the scooter. tire/wheel. DO NOT ride the DO NOT ride over speed bumps, thresholds, or other scooter in the rain. bumps at HIGH SPEED. DO NOT get wet. DO NOT carry heavy objects on DO NOT ride the scooter with the handlebar. only one foot. Watch your head when Watch your speed when traveling downhill. Use passing through doorways. both brakes together when traveling at high speed. 10 11 DO NOT touch the hub motor after DO NOT take your hands off the DO NOT ride on public roads, DO NOT rotate the handle violently riding because it can get hot. handlebar while riding. Do not ride motorways, or highways. while driving at high speed. with one hand only. DO NOT ride up and down stairs or jump over obstacles. DO NOT ride through puddles or The KickScooter is for one rider other bodies of water deeper only. Do not carry any passengers. than 1 inch (2 cm). Do not carry a child. Do not ride when pregnant. WARNING Always keep both hands on the handlebar or you risk serious injury due to loss of balance and falls. 12 13 9 Folding and Carrying 10 Maintenance Safety Hook Cleaning and Storage Use a soft, wet cloth to wipe the mainframe clean. Hard to remove dirt can be scrubbed with a toothbrush and toothpaste, then cleaned with a soft, wet cloth. NOTE Do not wash your KickScooter with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the appearance and internal structure of your KickScooter. Do not wash your KickScooter with a power washer or hose. WARNING Folding Open Make sure the KickScooter is powered OFF, the charging cable is unplugged, and the rubber cap on the charge port is tightly sealed before cleaning; otherwise you may damage the electronic components. Store your KickScooter in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to sunlight Turn off your KickScooter. Turn the Align the bell and the buckle Disengage the bell lever from and temperature extremes (both hot and cold) will accelerate the aging process of the plastic components and may safety hook counterclockwise and and hook them. the buckle. Fold the handlebar reduce battery life. open the quick release lever. stem up, close the quick release Battery Pack Maintenance lever and turn the safety hook Do not store or charge the battery at temperatures outside the stated limits (see Specifications). Do not puncture the clockwise. battery. Refer to your local laws and regulations regarding battery recycling and/or disposal. A well maintained battery can perform well even after many miles of riding. Charge the battery after each ride and avoid draining the battery completely. When used at room temperature (70°F [22°C]) the battery range and performance is at its best; whereas using it at temperatures below 32°F (0°C) can decrease range and performance. Typically, at -4°F (-20°C) range can be half that of the same battery at 70°F (22°C). Battery range will recover when temperature rises. More details are available in the App. NOTE Typically, a fully charged battery should retain charge for 120-180 days. A low-power battery should retain charge for 30-60. Remember to charge the battery after each use. Completely draining the battery may cause permanent damage to the battery. Electronics inside the battery record the charge-discharge condition of the battery; damage caused by over-charging or under-charging will not be covered by the Limited Warranty. WARNING Do not attempt to disassemble the battery. Do not touch battery contacts. Do not dismantle or puncture the casing. Keep the battery contacts away from metal objects to prevent short circuit. Risk of fire. No user serviceable parts. Do not charge or use your battery if it is damaged or see trace of water. Carrying WARNING Do not ride when the ambient temperature is outside the machine operation temperature (see Specifications) because When your KickScooter is folded up, simply lift it by the stem to carry. low/high temperature will limit the maximum power/torque. Doing so could cause personal injury or property damage due to slips or falls. 14 15 11 Specifications 12 Certifications Item G30 Federal Communications Commission (FCC) Compliance Statement for USA Unfold: Length x Width x Height 40x17x45 in (102×43×113 cm) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device Dimensions Fold: Length x Width x Height 45x17x13 in (113×43×32 cm) may not cause harmful interference, and (2) this device must accept any interference received, including interference Weight Net Approx. 40 lbs (18 kg) that may cause undesired operation. Payload 55.1–265 lbs (25–120 kg) Rider Recommended Age 14+ years NOTE Required Height 3’11”–6’6” (120–200 cm) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the Max. Speed 15.5 mph (25 km/h) FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Typical Range [1] 31 miles (50 km) installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in 技术说明： Max. Slope 20% accordance with the instructions, may cause harmful interference to radio communications. However, there is no Machine Parameters asphalt/flat pavement; obstacles < 0.4 in (1 cm); Traversable Terrain guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to gaps < 1.2 in (3 cm) radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try Operating Temperature 14–104°F (-10–40°C) to correct the interference by one or more of the following measures: Storage Temperature -4–122°F (-20–50°C) IPX5 —Reorient or relocate the receiving antenna. IP Rating Duration of Charging 9~10 h —Increase the separation between the equipment and receiver. Nominal Voltage 36.8 VDC —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Max. Charging Voltage 42 VDC —Consult the dealer or an experienced radio/TV technician for help. Battery Charging Temperature 32–104°F (0–40°C) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Nominal Capacity 540 Wh Over-heating, short circuit, over-current and over-charge Industry Canada (IC) Compliance Statement for Canada Battery Management System protection This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following two Number Of Batteries 1 conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including Nominal Power 350 W Motor interference that may cause undesired operation of the device. Max. Power 700 W Output Power 121 W CAN ICES-3 (B)/NMB-3(B) Charger Input Voltage 100–240V ～ 50/60Hz Output Voltage 42 VDC “Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. Output Current 2.9 A L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) 1、材料 ( 楞形 \ 克重配比 )：105g 金东太空梭亚光双面铜版纸 Shock Absorber front & rear l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en Brake Light LED rear light compromettre le fonctionnement." Features Riding Modes Speed limit mode, Standard mode and Sport mode Neither Segway Inc. nor Ninebot is responsible for any changes or modifications not expressly approved by Segway Inc. or Ninebot. Such modifications could void the user's authority to operate the equipment. [1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 11.2 mph (18 km/h) on average on pavement. 16 17 2、工艺：骑马钉，封面封底过哑油。 Ninebot KickScooter Max (model G30) Restriction of Hazardous Substances (RoHS) Directive FCC ID: 2ALS8-NB9676 IC: 22636-NB9676 This Ninebot (Changzhou) Tech Co., Ltd. product, with included parts (cables, cords, and so on) meets the Important WEEE information requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment “RoHS ( recast”or“RoHS 2”). 样品版本 Radio Equipment Directive WEEE Disposal and Recycling Information Correct Disposal of this product. This marking indicates that this product should not be disposal with other household wastes through out the EU. Segway Europe BV, Hogehilweg 8, 1101 CC Amsterdam, The Netherlands. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsible to 3、印刷颜色：PANTONE Cool Gray 11 C PANTONE 1505 C Hereby, Ninebot (Changzhou) Tech Co., Ltd, declares that the wireless equipment listed in this section are in compliance promote the sustainable reuse of materials resources. To return your used device, please use the return and collection with the essential requirements and other relevant provisions of Directive 2014/53/EU. systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. Frequency Band(s) 2.4000-2.4835GHz Bluetooth Max. RF Power 100mW Battery recycling information for the European Union Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC and amendment 13 Trademark and Legal Statement 2013/56/EU concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Ninebot is the registered trademark of Ninebot (Tianjin) Tech. Co., Ltd; Segway and the Rider Design are the registered Union. This label is applied to various batteries to indicate that the battery is not to be thrown away, but rather reclaimed trademarks of Segway Inc.; Android, Google Play are trademarks of Google Inc., App Store is a service mark of Apple Inc., PANTONE 109 C upon end of life per this Directive. The respective owners reserve the rights of their trademarks referred to in this manual. In accordance with the European Directive 2006/66/EC and amendment 2013/56/EU, batteries and accumulators are The KickScooter is covered by relevant patents. For patent information go to http://www.segway.com. S01-20181212 labeled to indicate that they are to be collected separately and recycled at end of life. The label on the battery may also include a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for cadmium). We have attempted to include descriptions and instructions for all the functions of the KickScooter at the time of Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted municipal waste, but printing. However, due to constant improvement of product features and changes of design, your KickScooter may differ use the collection framework available to customers for the return, recycling, and treatment of batteries and accumula- slightly from the one shown in this document. Visit the Apple App Store (iOS) or the Google Play Store (Android) to download and install the App. tors. Customer participation is important to minimize any potential effects of batteries and accumulators on the environment and human health due to the potential presence of hazardous substances. Please note that there are multiple Segway and Ninebot models with different functions, and some of the functions mentioned herein may not be applicable to your unit. The manufacturer reserves the right to change the design and Before placing electrical and electronic equipment (EEE) in the waste collection stream or in waste collection facilities, functionality of the KickScooter product and documentation without prior notice. the end user of equipment containing batteries and/or accumulators must remove those batteries and accumulators for separate collection. © 2019 Ninebot (Beijing) Tech Co. Ltd. All rights reserved. 4、其他特殊说明： 18 19 14 Contact Contact us if you experience issues relating to riding, maintenance and safety, or errors/faults with your KickScooter. Americas: Segway Inc. 14 Technology Drive, Bedford, NH 03110, USA Tel: 1-603-222-6000 图号 04.07.0326.00-T0 Fax: 1-603-222-6001 Toll Free: 1-866-473-4929 E-mail Sales: customeroperation@segway.com E-mail Service: technicalsupport@segway.com Website: www.segway.com Europe, Middle East and Africa: Segway Europe B.V. Hogehilweg 8, 1101CC Amsterdam, The Netherlands Website: www.segway.com Have your KickScooter serial number on hand when contacting Segway. 说明书 You can find your serial number on the underside of your KickScooter or in the App under More Settings –> Basic Information. 数量 1 20 21 标记 处数 更改文件号 签 名 日期 图样标记 重量 比例 设计 鲁凡如 工艺 产品类别 1:1 绘图 鲁凡如 标准化 校对 XXX 批准 审核 日期 共1页 共1页


Document Created: 2019-01-30 16:23:57
Document Modified: 2019-01-30 16:23:57
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC