RF Exposure Report

FCC ID: 2ALS7IQ7210DJ

RF Exposure Info

Download: PDF
FCCID_3550251

FCC ID: 2ALS7IQ7210DJ FCC 47 CFR MPE REPORT Dongguan City MeiZhiZun Electronics Technology Co., Ltd Trolley BT Speaker Model Number: IQ-7210DJBT Additional Model: CM-09, DM61, M61, DDM61, DM60 FCC ID: 2ALS7IQ7210DJ Prepared for: Dongguan City MeiZhiZun Electronics Technology Co., Ltd No. 33, Hehe Road, Xiangxi Village, Liaobu Town, Dongguan, Guangdong. China Prepared By: EST Technology Co., Ltd. San Tun Management Zone, Houjie District, Dongguan, China Tel: 86-769-83081888-808 Report Number: ESTE-R1708128 Date of Test: June 22~July 03, 2017 Date of Report: July 05, 2017 EST Technology Co. ,Ltd Report No. ESTE-R1708128 Page 1 of 4

FCC ID: 2ALS7IQ7210DJ Maximum Permissible Exposure 1、Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. (a)、Limits for Occupational / Controlled Exposure Frequency Electric Field Magnetic Power Averaging Range (MHz) Strength E) Field Strength Density (S) Times︱E︱ (V/m) (H) (A/m) (mW/cm2) 2 , ︱H︱2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-10000 5 6 (b)、Limits for General Population / Uncontrolled Exposure Frequency Electric Field Magnetic Power Averaging Range (MHz) Strength E) Field Strength Density (S) Times︱E︱ (V/m) (H) (A/m) (mW/cm2) 2 , ︱H︱2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-10000 1.o 30 Note: f=frequency in MHz; *Plane-wave equivalent power density 2、MPE Calculation Method E (V/m) = (30*P*G) 0.5/d Power Density: Pd (W/m2) = E2/377 E = Electric Field (V/m) P = Peak RF output Power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = (30*P*G) / (377*d2) From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained EST Technology Co. ,Ltd Report No. ESTE-R1708128 Page 2 of 4

FCC ID: 2ALS7IQ7210DJ 3、Conducted Power Result 3.1 Module 1 Target Antenna gain Frequency Peak output power Peak output power Mode power (MHz) (dBm) (mW) (dBi) (Linear) （dBm） 2402 -5.432 0.286 -6±1 0 1 GFSK 2441 -5.242 0.299 -6±1 0 1 2480 -5.439 0.286 -6±1 0 1 2402 -4.439 0.360 -5±1 0 1 π/4-DQPSK 2441 -4.445 0.359 -5±1 0 1 2480 -4.870 0.326 -5±1 0 1 3.1 Module 2 Target Antenna gain Frequency Peak output power Peak output power Mode power (MHz) (dBm) (mW) (dBi) (Linear) （dBm） 2402 -6.142 0.243 -7±1 0 1 GFSK 2441 -6.106 0.245 -7±1 0 1 2480 -5.739 0.267 -6±1 0 1 2402 -5.181 0.303 -6±1 0 1 π/4-DQPSK 2441 -5.123 0.307 -6±1 0 1 2480 -4.746 0.335 -5±1 0 1 EST Technology Co. ,Ltd Report No. ESTE-R1708128 Page 3 of 4

FCC ID: 2ALS7IQ7210DJ 4、Calculated Result and Limit 4.1 Module 1 Antenna gain Limited Power of Target Density Power Test Mode power (S) Density (dBi) (Linear) Result （dBm） (mW (S) /cm2) (mW /cm2) GFSK -5 0 1 0.00006 1 Compiles π/4-DQPSK -4 0 1 0.00008 1 Compiles 4.1 Module 2 Antenna gain Limited Power of Target Density Power Test Mode power (S) Density (dBi) (Linear) Result （dBm） (mW (S) /cm2) (mW /cm2) GFSK -5 0 1 0.00006 1 Compiles π/4-DQPSK -4 0 1 0.00008 1 Compiles EST Technology Co. ,Ltd Report No. ESTE-R1708128 Page 4 of 4


Document Created: 2017-09-06 08:59:37
Document Modified: 2017-09-06 08:59:37
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC