2ALP8SC TRpt 15B

FCC ID: 2ALP8SC

Test Report

Download: PDF
FCCID_3754363

EMC TEST REPORT FCC 47 CFR Part 15B Industry Canada ICES-003 Electromagnetic compatibility - Unintentional radiators Report Reference No. .................... : G0M-1711-7034-EF0115B-V01 Testing Laboratory ........................ : Eurofins Product Service GmbH Address ............................................ : Storkower Str. 38c 15526 Reichenwalde Germany Accreditation .................................... : A2LA Accredited Testing Laboratory, Certificate No.: 1983.01 FCC Test Firm Designation Number: DE0008 IC Testing Laboratory site: 3470A-2 Applicant’s name ........................... : ANDREAS STIHL AG & Co. KG Address ............................................ : Andreas-Stihl-Straße 4 71336 Waiblingen GERMANY Test specification: Standard ........................................... : 47 CFR Part 15 Subpart B ICES-003, Issue 6:2016 ANSI C63.4:2014 Equipment under test (EUT): Product description STIHL Smart Connector / STIHL Part No. 0000-400-4900-A Model No. SC Additional Models None Hardware version HW:00.70 Firmware / Software version SW:01.00 FCC-ID: 2ALP8SC IC: 23431-SC Test result Passed Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 1 of 22

«<= eurofins | ‘ Product Service Possible test case verdicts: — NOt @PpIiCabI@ t0 t@St ODJ@Ot.............c.cseeeemmemee : N/A — test object does meet the requirement.......................: P (Pass) — test object does not meet the requirement.................: F (Fail) Testing: Date Of rECGipt Of t@8t It@M ...............c.cccemeemeeace? 2018—01—24 Date (s) of perfOrMmance Of t@StS ................c.c..c..c....: 2018—02—01 COMPiIGU DY ..........ccmmmmemmmmnne. : Matthias Handrik %‘,fi, Tested by (+ signature).................... i Malthins Handifik. cqnpemmmmpoenmenmensscoms Approved by (+ signature) ............... ; Jens Marquardt Deputy Head of Lab DAIG Of IBSUB —. smm mommenmanscsmmmreres : 2018—02—412 Total number of pages .... 22 General remarks: The test results presented in this report relate only to the object tested. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. Additional comments: Test Report No.: GOM—1711—7034—EF0115B—V01 Eurofins Product Service GmbH Storkower Str. 38c, D—15526 Reichenwalde, Germany Page 2 of 22

Version History Version Issue Date Remarks Revised by V01 2018-02-12 Initial Release Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 3 of 22

REPORT INDEX 1 EQUIPMENT (TEST ITEM) DESCRIPTION 5 1.1 Photos – Equipment external 6 1.2 Photos – Equipment internal 8 1.3 Photos – Test setup 9 1.4 Supporting Equipment Used During Testing 10 1.5 Input / Output Ports 10 1.6 Operating Modes and Configurations 11 1.7 Test Equipment Used During Testing 12 1.8 Sample emission level calculation 13 2 RESULT SUMMARY 14 3 TEST CONDITIONS AND RESULTS 15 3.1 Test Conditions and Results – Radiated emissions 15 Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 4 of 22

1 Equipment (Test item) Description Description STIHL Smart Connector / STIHL Part No. 0000-400-4900-A Model SC Additional Models None Serial number None Hardware version HW:00.70 Software / Firmware version SW:01.00 FCC-ID 2ALP8SC Contains IC 23431-SC Power supply 3V DC (non rechargeable battery) AC/DC-Adaptor None Type Bluetooth Low Energy Model not specified Manufacturer not specified HW Version not specified Radio module SW Version not specified SVN not specified FCC-ID not specified IC not specified ANDREAS STIHL AG & Co. KG Andreas-Stihl-Straße 4 Manufacturer 71336 Waiblingen GERMANY Highest internal frequency Fmax [MHz] = 2400 Device classification Class B Equipment type Tabletop Number of tested samples 1 Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 5 of 22

1.1 Photos – Equipment external EUT TOP EUT BOTTOM Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 6 of 22

EUT label EUT Inside I Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 7 of 22

1.2 Photos – Equipment internal EUT Inside II Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 8 of 22

1.3 Photos – Test setup Test Setup : Radiated Emissions I Test Setup : Radiated Emissions II Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 9 of 22

1.4 Supporting Equipment Used During Testing Product Device Manufacturer Model No. Comments (e.g. serial no.) Type* AE Smartphone Samsung Galaxy S4 RF8F60WT66H Ver.: 3.6.8-connect Build: AE APP STHIL Stihl connect 600579 *Note: Use the following abbreviations: AE : Auxiliary/Associated Equipment, or SIM : Simulator (Not Subjected to Test) CABL : Connecting cables 1.5 Input / Output Ports Max. Cable Cable Port # Name Type* Comments (e.g. Cat. of Cable) Length Shielded 1 - - - - - *Note: Use the following abbreviations: AC : AC power port DC : DC power port N/E : Non electrical I/O : Signal input or output port TP : Telecommunication port Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 10 of 22

1.6 Operating Modes and Configurations Mode # Description EUT powered via internal battery; Bluetooth low Energy connection to smartphone. 1 App shows the active EUT (displayed) with green dot Configuration # EUT Configuration EUT is placed in measurement chamber. Smartphone is placed in the corner of the 1 measurement chamber. Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 11 of 22

1.7 Test Equipment Used During Testing Measurement Software Description Manufacturer Name Version EMC Test Software Dare Instruments Radimation 2016.1.10 Radiated emissions AC1 Description Manufacturer Model Identifier Cal. Date Cal. Due Rohde & Biconical antenna Schwarz HK116 EF00186 2016-02 2018-02 Vertriebs GmbH LPD Antenna R&S HL 223 EF00187 2016-05 2019-05 Double-Ridged ETS-Lindgren 3117 EF01256 2017-07 2018-07 Guide Antenna USA Keysight N9038A- MXE EMI Receiver EF01070 2017-08 2018-08 Technologies 526/WXP RF Cable - System Cal. System Cal RF Cable - System Cal. System Cal Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 12 of 22

1.8 Sample emission level calculation The following is a description of terms and a sample calculation, as appears in the radiated emissions data table. The numbers used in the calculation are for example only. There is no direct correlation to the specific data taken for the product described in this document: Reading: This is the reading obtained on the spectrum analyzer in dBµV. Any external preamplifiers used are taken into account through internal analyzer settings. A.F.: This is the antenna factor for the receiving antenna. It is a conversion factor, which converts electric fields strengths to voltages, which can be measured directly on the spectrum analyzer. It is treated as a loss in dB. Cable losses have been included with the A.F. to simplify the calculations. The antenna factor is used in calculations as follows: Reading on Analyzer (dBµV) + A.F. (dB) = Net field strength (dBµV/m) Net: This is the net field strength measurement (as shown above). Limit: This is the FCC Class B radiated emission limit (in units of dBµV/m). The FCC limits are given in units of µV/m. The following formula is used to convert the units of µV/m to dBµV/m: Limit (dBµV/m) = 20*log (µV/m) Margin: This is the margin of compliance below the FCC limit. The units are given in dB. A negative margin indicates the emission was below the limit. A positive margin indicates that the emission exceeds the limit. Example only: Reading + AF = Net Reading : Net reading - FCC limit = Margin 21.5 dBµV + 26 dB = 47.5 dBµV/m : 47.5 dBµV/m - 57.0 dBµV/m = -9.5 dB Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 13 of 22

2 Result Summary FCC 47 CFR Part 15B, Industry Canada ICES-003 Product Specific Reference Requirement – Test Result Remarks Standard Method 47 CFR 15.109 Radiated emissions ANSI C 63.4 PASS ICES-003 Item 6.2 47 CFR 15.107 AC power line conducted emissions ANSI C63.4 N/A ICES-003 Item 6.1 Remarks: Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 14 of 22

3 Test Conditions and Results 3.1 Test Conditions and Results – Radiated emissions Radiated emissions acc. FCC 47 CFR 15.109 / ICES-003 Verdict: PASS Laboratory Parameters: Required prior to the test During the test Ambient Temperature 15 to 35 °C 24.1°C Relative Humidity - 23 Test according referenced Reference Method standards ANSI C63.4 Sample is tested with respect to the Equipment class requirements of the equipment class Class B Test frequency range determined from Highest emission frequency highest emission frequency Fmax [MHz] = 2400 Fully configured sample scanned over Frequency range the following frequency range 30 MHz to 13 GHz Operating mode 1 Configuration 1 Limits and results Class B Frequency [MHz] Quasi-Peak [dBµV/m] Result Average [dBµV/m] Result Peak [dBµV/m] Result 30 – 88 40 PASS - - - 88 – 216 43.5 PASS - - - 216 – 960 46 PASS - - - 960 – 1000 54 PASS - - - > 1000 - - 54 PASS 74 PASS Comments: Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 15 of 22

Test Procedure: The test site is in accordance with ANSI C63-4:2014 requirements and is listed by FCC. The measurement procedure is as follows: Exploratory measurement:  The EUT was placed on a non-conductive table at a height of 0.8m.  The EUT and support equipment, if needed, were set up to simulate typical usage.  Cables, of type and length specified by the manufacturer, were connected to at least one port of each type and were terminated by a device or simulating load of actual usage.  The antenna was placed at a distance of 3 or 10 m.  The received signal was monitored at the measurement receiver. o Cables not bundled were manipulated within the range of likely arrangements to produce the highest emission amplitude o To maximize the suspected emissions the EUT is rotated 360 degrees. If the signal exceeds the previous amplitude, go back to the corresponding azimuth and manipulate the cables again for maximizing the emissions if possible. o Move the antenna from 1 to 4m to maximize the suspected highest amplitude signal.  This procedure has to be performed in both antenna polarizations, horizontal and vertical.  The arrangement of the equipment with the maximum emission level is shown on the setup picture at item 1.3. Final measurement:  The EUT was placed on a 0.8 m non-conductive table at a 3 m distance from the receive antenna. The antenna output was connected to the measurement receiver  A biconical antenna was used for the frequency range 30 – 200 MHz, a logarithmic periodical antenna was used for the frequency range from 200 – 1000 MHz. Above one 1 GHz a Double Ridged Broadband Horn antenna was used. The antenna was placed on an adjustable height antenna mast  The EUT and cable arrangement were based on the exploratory measurement results  Emissions were maximized at each frequency by rotating the EUT and adjusting the receive antenna height and polarization. The maximum values were recorded.  The test data of the worst-case conditions were recorded and shown on the next pages. Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 16 of 22

Radiated emissions under normal conditions according to FCC Part 15b Project number: G0M-1711-7034 Applicant: ANDREAS STIHL AG & Co. KG EUT Name: STIHL Smart Connector / STIHL Part No. 0000-400-4900-A Model: SC Test Site: Eurofins Product Service GmbH Operator: Mr. Handrik Test Conditions: Tnom: 22.5°C, Unom: 3.0V DC Antenna: Rohde & Schwarz HK 116, Vertical Measurement distance: 3m Mode: Mode#1 Test Date: 2018-02-01 Note: Index 35 FCC §15.109 Class B QP RBW: 120 kHz, Vertical Max Peak 60 50 40 Electrical Field (dBµV/m) 30 20 10 0 -10 30 M 40 M 60 M 80 M 100 M 120 M 140 M 160 M 200 M Frequency (Hz) Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 17 of 22

Radiated emissions under normal conditions according to FCC Part 15b Project number: G0M-1711-7034 Applicant: ANDREAS STIHL AG & Co. KG EUT Name: STIHL Smart Connector / STIHL Part No. 0000-400-4900-A Model: SC Test Site: Eurofins Product Service GmbH Operator: Mr. Handrik Test Conditions: Tnom: 24°C, Unom: 3.0V DC Antenna: Rohde & Schwarz HK 116, Horizontal Measurement distance: 3m Mode: Mode#1 Test Date: 2018-02-01 Note: Index 36 FCC §15.109 Class B QP RBW: 120 kHz, Horizontal Max Peak 60 50 40 Electrical Field (dBµV/m) 30 20 10 0 -10 30 M 40 M 60 M 80 M 100 M 120 M 140 M 160 M 200 M Frequency (Hz) Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 18 of 22

Radiated emissions under normal conditions according to FCC Part 15b Project number: G0M-1711-7034 Applicant: ANDREAS STIHL AG & Co. KG EUT Name: STIHL Smart Connector / STIHL Part No. 0000-400-4900-A Model: SC Test Site: Eurofins Product Service GmbH Operator: Mr. Handrik Test Conditions: Tnom: 24°C, Unom: 3.0V DC Antenna: Rohde & Schwarz HL 223, Vertical Measurement distance: 3m Mode: Mode#1 Test Date: 2018-02-01 Note: Index 37 FCC §15.109 Class B QP RBW: 120 kHz, Vertical Max Peak 60 50 40 Electrical Field (dBµV/m) 30 20 10 0 200 M 300 M 400 M 500 M 600 M 700 M 800 M 1G Frequency (Hz) Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 19 of 22

Radiated emissions under normal conditions according to FCC Part 15b Project number: G0M-1711-7034 Applicant: ANDREAS STIHL AG & Co. KG EUT Name: STIHL Smart Connector / STIHL Part No. 0000-400-4900-A Model: SC Test Site: Eurofins Product Service GmbH Operator: Mr. Handrik Test Conditions: Tnom: 24°C, Unom: 3.0V DC Antenna: Rohde & Schwarz HL 223, Horizontal Measurement distance: 3m Mode: Mode#1 Test Date: 2018-02-01 Note: Index 38 FCC §15.109 Class B QP RBW: 120 kHz, Horizontal Max Peak 60 50 40 Electrical Field (dBµV/m) 30 20 10 0 200 M 300 M 400 M 500 M 600 M 700 M 800 M 1G Frequency (Hz) Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 20 of 22

Radiated emissions under normal conditions according to FCC Part 15b Project number: G0M-1711-7034 Applicant: ANDREAS STIHL AG & Co. KG EUT Name: STIHL Smart Connector / STIHL Part No. 0000-400-4900-A Model: SC Test Site: Eurofins Product Service GmbH Operator: Mr. Handrik Test Conditions: Tnom: 24°C, Unom: 3.0V DC Antenna: ETS-Lindgren 3117, Vertical Measurement distance: 3m Mode: Mode#1 Test Date: 2018-02-01 Note: Index 39 FCC §15.109 Class B AV FCC §15.109 Class B PK RBW: 1 MHz, Vertical Max Average RBW: 1 MHz, Vertical Max Peak 80 70 Electrical Field (dBµV/m) 60 50 40 30 20 1G 2G 3G 5G 10 G 13 G Frequency (Hz) Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 21 of 22

Radiated emissions under normal conditions according to FCC Part 15b Project number: G0M-1711-7034 Applicant: ANDREAS STIHL AG & Co. KG EUT Name: STIHL Smart Connector / STIHL Part No. 0000-400-4900-A Model: SC Test Site: Eurofins Product Service GmbH Operator: Mr. Handrik Test Conditions: Tnom: 24°C, Unom: 3.0V DC Antenna: ETS-Lindgren 3117, Horizontal Measurement distance: 3m Mode: Mode#1 Test Date: 2018-02-01 Note: Index 40 FCC §15.109 Class B AV FCC §15.109 Class B PK RBW: 1 MHz, Horizontal Max Average RBW: 1 MHz, Horizontal Max Peak 80 70 Electrical Field (dBµV/m) 60 50 40 30 20 1G 2G 3G 5G 10 G 13 G Frequency (Hz) Test Report No.: G0M-1711-7034-EF0115B-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 22 of 22


Document Created: 2018-02-14 05:52:51
Document Modified: 2018-02-14 05:52:51
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC