User Manual

FCC ID: 2ALN9-SE806

Users Manual

Download: PDF
FCCID_4076457

User Manual SE806 Illustration

1. Power on: Long press MFB 3 seconds, blue LED flashes with prompt ”dudu”. 2. Power off: Long press MFB 3 seconds, red LED light with prompt “du du”. 3. Play music: Short press MFB to play music. 4. Pause music: Short press MFB to play music, press MFB again to restart.

5. Volume up: Short press “+”, when reach the max volume with “beep” prompt. 6. Volume down: Short press ”-“, when reach the min volume with “beep” prompt. 7. Previous song: Long press “-“ 2 seconds. 8. Next song: Long press “+” 2 seconds Pairing 1.After long press the MFB button about 5s with prompt “Di Du”into pairing state with red Led flash, at same time, open the smartphone Bluetooth search pairing name SE806B, pairing successful in flashing blue lights. 2. When the earphoneare pairing with the smartphone successfully at first time,once the earphone power-off,the Bluetooth will disconnected with the smartphone. When the earphone power-on again, the Bluetooth will connect with thesmartphone automatically. Operation

1.Answer calls: When the earphone is connected to the smartphone, if there is an incoming call, short press the MFB button to answer the call. 2.Reject calls: Press the MFB button for 2 seconds to reject the call. 3.Hang up calls: Short press the MFB button to end the call. 4.The third party call: 1).If you are using ISO system, when you are talking with the second party, short press the MFB button to answer the third party call.At the same time ,the second party call will be ended automatically. For Android system, the second party call will be kept 2). When you are talking with the second party, long press MFB button about 2s to switch between the second party and the third party ,short press the MFB button to end the current calling. Connect with two smartphones After the earphone is power-on and connected with a smartphone, within 1 minute you can manually connect with the other smartphone which have connected the earphone before. At the same time, one earphone can connect with two smartphones.

Charging indication The earphone is automatically power-off when charging,. When charging the red LED lights on. When full charging the blue LED lights on. Power-saving mode If the earphone is not connected to any Bluetooth devices for 10 minutes, they will turn off automatically to save energy. Note 1.Battery status:Show the earphone battery when connect with ISO system smartphone. 2. Volume status: When the earphone connect with the smartphone ,volume+/- can synchronize with the phone. 3. Work temperature:-10℃~50℃ Specification

Led Indicator Status

FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction


Document Created: 2018-11-16 16:53:16
Document Modified: 2018-11-16 16:53:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC