User Manual

FCC ID: 2ALGNJH-TX278

Users Manual

Download: PDF
FCCID_3322876

www.juhuico.com -BFT 1.Hold button 1 and press button 2 four times ,then release both buttons,the 3.Press and retain pressed the button of the original remote control Best position for duplication led of SKY emits a quick flash every 2 sec. that you want to copy until the remote's led will turn on with a fix light and then emits a double flash every 2 sec. 2.Place the original remote control in front of the remote, at about 2-3 cm of distance 4.Press and retain pressed once again the same button of the original 3.Press and retain pressed the button of the original remote control that you remote control. want to copy until the remote's led will turn on with a fix light and then emits a 6.Now the LED will flash quickly, press the button of the remote where double flash every 2 sec. you want to store the code just copied, until the LED will turn off. 4.Transmit now the seed code of the original remote control (by pressing the 5.Now activate the procedure to insert the new remote control rear hide button or the buttons 1 and 2 simultaneously in the new models) on the receiver. 5. Now the LED will flash quickly, press the button of the remote where you Auto-scan Type want to store the code just copied, until the LED will turn off. ACM TX2, TX2 COLOR, TX4 6.Now activate the procedure to insert the new remote control on ADYX TE4433H BLUE, 433-HG BRAVO Multi-frequency the receiver. AERF COMPACT, HY-DOM, MERCURI B, MERCURI C, SABUTON, MARS, Face to face copy -FAAC and GENIUS SATURN, ST3/N, TERRA, TMP-1, TMP-2, UNITECH ATTENTION, PLEASE: Verify that the remote control to be copied is a ALLMATIC BROWN, BROWN RED, BRO.OVER, PASS, MINIPASS, TECH3 Up to 4 different remotes in 1 MASTER. Pressing any button, the LED should issue a double flash rather than switch APERIO GO, GO PRO, GO MINI PROGRAMMING: APERTO TX02-434-2,TX02-868-2 BLUE,4025 TX02-868-2,4022 TX02-434-2, 4020- on immediately as a fixed light. (Sommer) TX03-434,TX-03-868-4,4013,TX03-434-4 1.Hold button 1 and press button 2 four times APRIMATI -standard TR2/TR4, TM4, TXM 2.Place the original remote control in front of the remote, at about 2-3 cm of C 1.Hold button 1 and press button 2 four times ,then distance ATA PTX4 BLUE, PTX4 PINK release both buttons, the led of SKY emits a quick flash 3.Press and retain pressed the original remote control button that you want to AVIDSEN 104251, 104250, 104250 OLD, 104250 RED, 104257, 104350, 654250 every 2 sec. copy until the LED SKY switches on a fixed light and then It stars to emit a 2.Place and press the original remote control in front of BALLAN FM400, FM400E,FM404B,4013 double flash every 2 seconds. the remote , at about 2-3 cm of distance,until the led of TO. GO. WV, TWV, ROLLKEY, APPLE, LOT WCV, CUPIDO, TO.GO. QV, IO, SKY starts flash quickly. 4.Predispose the FAAC/GENIUS remote control for the emission of the seed BENINCA LOT2WCV,LOT1W,LOT2W,LOT4W,LOT1WM,LOT2WM, T2W,T4W,APPLE 3.While the LED of SKY is flashing, press the button of code (by pressing simultaneously the buttons 2 and 3) 5.While the FAAC/GENIUS LED is flashing, place it in front of the SKY, at about BESIDE BEZAP,HIT the SKY where you want to store ,the remote'code just 2-3 cm of distance and press the button that you want to copy until the remote’s MITTO, MITTO M ( MITTO2M/MITTO4M), MITTO RCB (MITTO copied, until the led will turn off. BFT RCB02/RCB04), MITTO A (MITTO 2A/MITTO 4A), MITTO B, Note: led will change frequency of flashing (faster than before), as confirm of the TRC(TRC2/TRC4), GHIBLI, MURALE, KLEIO,TE01,TE02,TE04,RB4 To duplicate a second button, repeat the operation from correct copy of the code. MURALE the point 1. -V2 CAME T431,T434,TOP432A,TOP434A,TOP432,TAM432SA,TOP432NA 1.Hold button 1 and press button 2 four times ,then release both buttons,the TRQ S449 (TRQ449100/TRQ449200/TRQ449300/TRQ449400), TRQ S449 led of SKY emits a quick flash every 2 sec. CARDIN GREEN (PRECODE), TXQ S449 (TXQ449200/TXQ449300/TXQ449400), 2.Place the original remote control in front of the remote, at about 2-3 cm of TXQ S449 GREEN, TRQ S486 (TRQ486200/TRQ486400), TXQ S486 distance (TXQ486200/TXQ486400), S437 TX, XRADO,S449,S476TX2,S476TX, S486 CASALI JA33 AMIGO, GENIUS/CASALI A252RC AMC:Automatic matching code

Warning Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.


Document Created: 2017-03-15 16:38:34
Document Modified: 2017-03-15 16:38:34
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC