User Manual V02

FCC ID: 2ALGLX1000

Users Manual

Download: PDF
FCCID_3430967

DATA SHEET Cassia X1000 Outdoor and Indoor Enterprise Bluetooth Router The Cassia X1000 is the world’s first long range enterprise Bluetooth router that can be used in both indoor and outdoor environments. It extends Bluetooth’s range up to 1000 feet open space and enables remote control of 22 Bluetooth low energy devices without requiring any changes to the Bluetooth end devices. The X1000 acts as an internet gateway working with the Cassia Access Controller for easy deployment and management. The Cassia X1000 enterprise Bluetooth router can be X1000 Bluetooth router without changing their used in both indoor and outdoor environments, Bluetooth end devices. In addition, Cassia offers the supports POE and offers enhanced functionalities., It ultimate device management solution called the can be attached to the pole or wall with an included Cassia IoT Access Controller (AC). Solution providers mounting kit or placed on a desktop or counter space. can use the AC to deploy and manage hundreds of It receives power from PoE via the uplink Ethernet Cassia X1000 routers and thousands of their port. X1000 is fully weather proof, and is widely connected devices from a single easy-to-use user deployed in school campus, sports field, stadiums, interface. manufacturing yards and large metropolitan areas. The X1000 has a built-in smart antenna array UNIQUE BENEFITS designed specifically for Bluetooth. It also supports Ethernet and 2.4GHz Wi-Fi. The X1000 is a first of its Seamless Bluetooth Coverage kind enterprise Bluetooth router capable of With smart antenna and RF management technology, extending Bluetooth’s range up to 1000 feet in open the X1000 can deliver stable Bluetooth coverage of space and expanding the number of devices that can 1000+ feet open air. This capability allows partners to be paired and connected to 22 Bluetooth low energy deploy seamless Bluetooth coverage indoor and out. devices, or listening to potentially hundreds of Remote Access and Control devices at the same time when operating in The X1000 connects your Bluetooth low energy broadcast mode. The X1000 can be used as a protocol devices that are within its coverage to your LAN or gateway, which translates between Bluetooth Internet, assigns them into groups, and allows them protocol and IP protocol. This enables Internet access to be controlled remotely. to your Bluetooth low energy devices from a remote location. Easy Integration (SDK) By simply integrating the Cassia SDK into a native The Cassia SDK allows our partners to connect their mobile app or cloud server, partners can use the proprietary Bluetooth low energy devices to the extended range and routing capabilities of the X1000

DATA SHEET Cassia X1000 Outdoor and Indoor Bluetooth Router without requiring any changes to the Bluetooth end devices. Easy Deployment and Management The X1000 is setup and managed by the Cassia IoT AC. Administrators can quickly deploy and check the status of all Bluetooth devices in their network (routers, sensors, bandwidth, battery life, device location, and more). Location Tracking Together with the Cassia AC, the X1000 can track and report location of the Bluetooth low energy devices within its coverage, providing geolocation data in real time. ADVANCED FEATURES OTHER INTERFACES  Reset button: Factory reset RADIO FREQUENCY  Visual indicator (LED): Power/System The Cassia X1000 supports and follows the Bluetooth  USB 2.0 (can be used for 3G/4G dongle) 4.0 standards.  Uplink: 10/100 BASE-T Ethernet (RJ-45)  Working frequency: ISM band 2.402 ~ LOCATIONING 2.480GHz  Use with the Cassia AC to report location of  Duplex mode: full duplex, time division Bluetooth low energy devices duplex (TDD) MECHANICAL MULTIPLE ROLES The Cassia X1000 supports broadcaster, listener,  Dimensions/weight:  sender and receiver roles, and can play multiple roles - 154 mm (BD) x 143mm (TD) x 259mm (H)  - Weight: 1.5 lbs. simultaneously. SECURITY SERVICES ENVIRONMENTAL  Support Bluetooth 4.0 security standards  Operating:  Support FIPS wireless standards - Temperature: -40 to 65°C (-40 to 149°F)  Advanced military grade 128bit AES - Humidity: 0% to 90% non-condensing encryption • Storage and transportation: - Temperature: -50° C to +70° C (-58° F to +158° F) NETWORKING CONNECTIONS  Wind resistance:  Integrated Wi-Fi on 802.11b/g/n (2.4GHz) - Up to 85-MPH sustained winds  10/100 BASE-T Ethernet support - Up to 135-MPH wind gusts MOUNTING CERTIFICATION  Mount kit to attach the router to the wall or  FCC (US), IC (Canada), CE (Europe), BQB, SRRC pole is included (China) POWER INTERFACE WARRANTY  Power over Ethernet: 802.3af/at compliant  1-year limited warranty source CASSIA NETWORKS, INC. | 97 E. BROKAW RD., SUITE 130-A/B, SAN JOSE, CA 95112 | SUPPORT@CASSIANETWORKS.COM

FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter.”

Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. l’appareil ne doit pas produire de brouillage; 2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement This radio transmitter (IC: 22505-X1000 ) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list below, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (IC: 22505-X1000 ) a été approuvé par Industrie Canada pour fonctionner avec les types d’antenne énumérés ci-dessous et ayant un gain admissible maximal. Les types d’antenne non inclus dans cette liste ci-dessous et dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) 109


Document Created: 2017-06-17 15:37:18
Document Modified: 2017-06-17 15:37:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC