1705RSU01204-Co-location Test Report

FCC ID: 2ALGLX1000

Test Report

Download: PDF
FCCID_3430966

MRT Technology (Suzhou) Co., Ltd Report No.: 1705RSU01204 Phone: +86-512-66308358 Report Version: V01 Fax: +86-512-66308368 Issue Date: 06-02-2017 Web: www.mrt-cert.com Co-location Report FCC ID: 2ALGLX1000 APPLICANT: Cassia Networks Inc. Application Type: Certification Product: Cassia Bluetooth Router Model No.: X1000, X1000-10, X1000-20 Brand Name: CASSIA FCC Classification: Digital Transmission System (DTS) Test Date: May 15 ~ June 02, 2017 Reviewed By : ( Jame Yuan ) Approved By : ( Marlin Chen ) The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.4-2013. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. FCC ID: 2ALGLX1000 Page Number: 1 of 4

Report No.: 1705RSU01204 Revision History Report No. Version Description Issue Date Note 1705RSU01204 Rev. 01 Initial report 06-02-2017 Valid FCC ID: 2ALGLX1000 Page Number: 2 of 4

Report No.: 1705RSU01204 1. TEST RESULT of Radiated Emissions for Co-located Test Mode: 2.4GHz Wi-Fi + 2.4GHz BLE Test Site: AC1 Transmit Test Engineer: Roy Polarity: Horizontal Remark: There is the ambient noise within frequency range 9kHz~30MHz and 18GHz~40GHz, the permissible value is not show in the report. No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/m) (dB) (dBuV/m) (dBuV) 1 1272.000 38.277 46.666 -35.723 74.000 -8.389 PK 2 1272.192 25.911 34.299 -28.089 54.000 -8.388 AV 3 3150.273 25.866 27.398 -28.134 54.000 -1.533 AV 4 3150.500 37.809 39.342 -36.191 74.000 -1.533 PK 5 5700.500 39.718 35.999 -34.282 74.000 3.719 PK 6 * 5700.828 27.923 24.203 -26.077 54.000 3.720 AV Note 1: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) – Pre_Amplifier Gain (dB). Note 2: We selected the 2.4GHz and 5GHz worst-case mode of radiated spurious emissions in the DTS reports. FCC ID: 2ALGLX1000 Page Number: 3 of 4

Report No.: 1705RSU01204 Test Mode: 2.4GHz Wi-Fi + 2.4GHz BLE Test Site: AC1 Transmit Test Engineer: Roy Polarity: Vertical Remark: There is the ambient noise within frequency range 9kHz~30MHz and 18GHz~40GHz, the permissible value is not show in the report. No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/m) (dB) (dBuV/m) (dBuV) 1 1238.000 35.611 44.293 -38.389 74.000 -8.682 PK 2 1238.129 25.618 34.299 -28.382 54.000 -8.681 AV 3 2334.283 26.671 30.287 -27.329 54.000 -3.616 AV 4 2334.500 36.767 40.384 -37.233 74.000 -3.617 PK 5 4748.500 38.628 36.084 -35.372 74.000 2.544 PK 6 * 4748.663 28.944 26.399 -25.056 54.000 2.545 AV Note 1: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) – Pre_Amplifier Gain (dB). Note 2: We selected the 2.4GHz and 5GHz worst-case mode of radiated spurious emissions in the DTS reports. The End FCC ID: 2ALGLX1000 Page Number: 4 of 4


Document Created: 2017-06-12 12:05:30
Document Modified: 2017-06-12 12:05:30
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC