18_ER100102 RFExp

FCC ID: 2ALCVER100102

RF Exposure Info

Download: PDF
FCCID_3727073

FCC ID: 2ALCVER100102 SAR Evaluation Test Requirement: FCC Part 1.1307 Evaluation Method: FCC Part2.1093 & KDB 447498 D01 General RF Exposure Guidance v06 Requirements 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√ f(GHz)] ≤3.0 for 1-g SAR and ≤7.5 for 10-g extremity SAR where 1. f(GHz) is the RF channel transmit frequency in GHz 2. Power and distance are rounded to the nearest mW and mm before calculation 3. The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Test result Conduc Source-based Minimum test SAR Test ted Conducted time-averaged separation distance SAR Test Exclusion Exclusion Peak Peak maximum required for the Thresholds Result Thresholds power( power(mW) conducted output exposure conditions Calculation Value Limit dBm) power(mW) (mm) -1.82 0.66 0.66 5 0.20 3.0 Compliance Note: No SAR measurement is required. Remark: Max. duty factor is 100% Result: Compliance No SAR measurement is required. ======End====== Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn


Document Created: 2018-01-17 15:15:30
Document Modified: 2018-01-17 15:15:30
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC