Test report part 1

FCC ID: 2AL9D-FWR7302

Test Report

Download: PDF
FCCID_3576657

Shenzhen CTL Testing Technology Co., Ltd. Tel: +86-755-89486194 Fax: +86-755-26636041 TEST REPORT FCC PART 15.407 Report Reference No. ................. : CTL1705267012-WF-02 Compiled by: Allen Wang ( position+printed name+signature) (File administrators) Tested by: Nice Nong ( position+printed name+signature) (Test Engineer) Approved by: ( position+printed name+signature) Ivan Xie (Manager) Product Name.............................. : VoIP Wireless Router FWR7302, FWR7301, FWR7300, FWR9302, FWR9301 FWR9300, FWR7302-NOSFP, FWR7301-NOSFP Model/Type reference ................. : FWR7300-NOSFP, FWR9302-NOSFP, FWR9301-NOSFP FWR9300-NOSFP Trade Mark ................................... : Flyingvoice FCC ID .......................................... : 2AL9D-FWR7302 Applicant’s name ........................ : Flyingvoice Network Technology Co., Ltd Room102, 1F East, Bldg 3#, Minqi Park, Pingshan, Xili, Nanshan Address of applicant .................. : District, Shenzhen, China Test Firm ...................................... : Shenzhen CTL Testing Technology Co., Ltd. Floor 1-A, Baisha Technology Park, No.3011, Shahexi Road, Address of Test Firm .................. : Nanshan District, Shenzhen, China 518055 Test specification ........................ : Standard ........................................ : FCC Part 15 Subpart E—Unlicensed National Information Infrastructure Devices TRF Originator .............................. : Shenzhen CTL Testing Technology Co., Ltd. Master TRF ................................... : Dated 2011-01 Date of Receipt ............................ : June 09, 2017 Date of Test Date ......................... : June 09, 2017–July 12, 2017 Data of Issue ................................ : July 12, 2017 Result ........................................... : Pass Shenzhen CTL Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context.

V1.0 Page 2 of 55 Report No.: CTL1705267012-WF-02 TEST REPORT July 12, 2017 Test Report No. : CTL1705267012-WF-02 Date of issue Equipment under Test : VoIP Wireless Router Model /Type : FWR7302, FWR7301, FWR7300, FWR9302, FWR9301, FWR9300, FWR7302-NOSFP, FWR7301-NOSFP, FWR7300-NOSFP, FWR9302-NOSFP, FWR9301-NOSFP, FWR9300-NOSFP Applicant : Flyingvoice Network Technology Co., Ltd : Room102, 1F East, Bldg 3#, Minqi Park, Pingshan, Xili, Address Nanshan District, Shenzhen, China Manufacturer : Flyingvoice Network Technology Co., Ltd : Room102, 1F East, Bldg 3#, Minqi Park, Pingshan, Xili, Address Nanshan District, Shenzhen, China Test result Pass * * In the configuration tested, the EUT complied with the standards specified page 5. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory.

V1.0 Page 3 of 55 Report No.: CTL1705267012-WF-02 ** Modified History ** Revisions Description Issued Data Report No. Remark Version 1.0 Initial Test Report Release 2017-07-12 CTL1705267012-WF-02 Tracy Qi

V1.0 Page 4 of 55 Report No.: CTL1705267012-WF-02 Table of Contents Page 1. SUMMARY............................................................................................................................................................ 5 1.1. TEST STANDARDS ..................................................................................................................................................... 5 1.2. TEST DESCRIPTION ........................................................................................................................................................ 5 1.3. TEST FACILITY .............................................................................................................................................................. 6 1.4. STATEMENT OF THE MEASUREMENT UNCERTAINTY ............................................................................................................... 6 2. GENERAL INFORMATION....................................................................................................................................... 7 2.1. ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 7 2.2. GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 7 2.3. DESCRIPTION OF TEST MODES AND TEST FREQUENCY .......................................................................................................... 8 2.4. EQUIPMENTS USED DURING THE TEST .............................................................................................................................. 9 2.5. RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................................................ 9 2.6. MODIFICATIONS ........................................................................................................................................................... 9 3. TEST CONDITIONS AND RESULTS ......................................................................................................................... 10 3.1. CONDUCTED EMISSIONS TEST .......................................................................................................................................10 3.2. UNDESIRABLE RADIATED EMISSIONS .............................................................................................................................. 15 3.3. MAXIMUM CONDUCTED OUTPUT POWER.......................................................................................................................21 3.4. POWER SPECTRAL DENSITY ..........................................................................................................................................23 3.5. EMISSION BANDWIDTH (26DBM BANDWIDTH) ................................................................................................................35 3.6. MINIMUM EMISSION BANDWIDTH (6DBM BANDWIDTH)...................................................................................................43 3.7. FREQUENCY STABILITY ................................................................................................................................................. 51 4. TEST SETUP PHOTOS OF THE EUT ........................................................................................................................ 53 5. PHOTOS OF THE EUT ........................................................................................................................................... 55

V1.0 Page 5 of 55 Report No.: CTL1705267012-WF-02 1. SUMMARY 1.1. TEST STANDARDS The tests were performed according to following standards: FCC Rules Part 15 Subpart E—Unlicensed National Information Infrastructure Devices ANSI C63.10:2013 : American National Standard for Testing Unlicensed Wireless Devices ANSI C63.4: 2014: American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40GHz Range of 9 kHz to 40GHz KDB789033 D02: General UNII Test Procedures New Rules v01r02 1.2. Test Description FCC Requirement FCC Part 15.207 AC Power Conducted Emission PASS FCC Part 15.407(a) Emission Bandwidth(26dBm Bandwidth) PASSNote1 Minimum Emission Bandwidth(6dBm FCC Part 15.407(e) PASSNote2 Bandwidth) FCC Part 15.407(a) Maximum Conducted Output Power PASS FCC Part 15.407(a) Peak Power Spectral Density PASS FCC Part 15.407(g) Frequency Stability PASS FCC Part 15.407(b) Undesirable emission PASS FCC Part 15.407(b)/15.205/15.209 Radiated Emissions PASS FCC Part 15.407(h) Dynamic Frequency Selection N/A FCC Part 15.203/15.247(b) Antenna Requirement PASS Note 1: Apply to U-NII 1, U-NII 2A, and U-NII 2C band. Note 2: Apply to U-NII 3 band only.

V1.0 Page 6 of 55 Report No.: CTL1705267012-WF-02 1.3. Test Facility 1.3.1 Address of the test laboratory Shenzhen CTL Testing Technology Co., Ltd. Floor 1-A, Baisha Technology Park, No. 3011, Shahexi Road, Nanshan, Shenzhen 518055 China There is one 3m semi-anechoic chamber and two line conducted labs for final test. The Test Sites meet the requirements in documents ANSI C63.4 and CISPR 22/EN 55022 requirements. 1.3.2 Laboratory accreditation The test facility is recognized, certified, or accredited by the following organizations: IC Registration No.: 9618B The 3m alternate test site of Shenzhen CTL Testing Technology Co., Ltd. EMC Laboratory has been registered by Certification and Engineer Bureau of Industry Canada for the performance of with Registration No.: 9618B on November 13, 2013. FCC-Registration No.: 970318 Shenzhen CTL Testing Technology Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration 970318, December 19, 2013. 1.4. Statement of the measurement uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was calculated for all measurements listed in this test report acc. to CISPR 16 - 4 “Specification for radio disturbance and immunity measuring apparatus and methods – Part 4: Uncertainty in EMC Measurements“ and is documented in the Shenzhen CTL Testing Technology Co., Ltd. quality system acc. to DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. Hereafter the best measurement capability for CTL laboratory is reported: Measurement Test Notes Uncertainty Transmitter power conducted ±0.57 dB (1) Transmitter power Radiated ±2.20 dB (1) Conducted spurious emission 9KHz-40 GHz ±2.20 dB (1) Occupied Bandwidth ±0.01ppm (1) Radiated Emission 30~1000MHz ±4.10dB (1) Radiated Emission Above 1GHz ±4.32dB (1) Conducted Disturbance0.15~30MHz ±3.20dB (1) (1) This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2.

V1.0 Page 7 of 55 Report No.: CTL1705267012-WF-02 2. GENERAL INFORMATION 2.1. Environmental conditions During the measurement the environmental conditions were within the listed ranges: Normal Temperature: 25°C Relative Humidity: 55 % Air Pressure: 101 kPa 2.2. General Description of EUT Product Name: VoIP Wireless Router Model: FWR7302 Power supply: AC 120V/60Hz Model: S18B72-120A150-C4 Adapter 1 Input: 100-240V~, 50/60Hz, 0.7A Max information: Output: 12V 1.5A Model: S12B22-120A100-C4 Adapter 2 Input: 100-240V~, 50/60Hz, 0.5A Max information: Output: 12V 1A WIFI 20MHz system 40MHz system 80MHz system 160MHz system 802.11a Supported type: 802.11n 802.11n N/A N/A 802.11ac 802.11ac Operation 5180MHz-5240MHz 5190MHz-5230MHz N/A N/A frequency: 5745MHz-5825MHz 5755MHz-5795MHz Modulation: OFDM OFDM N/A N/A Channel number: 9 4 N/A N/A Channel separation: 20MHz 40MHz N/A N/A Antenna type: Internal antenna 2T2R Antenna gain: 2.0dBi NOTE:Directional gain of WIFI MIMO mode =2+10log2=5.01dBi 802.11a is SISO mode only 802.11n,802.11ac is MIMO mode only

V1.0 Page 8 of 55 Report No.: CTL1705267012-WF-02 2.3. Description of Test Modes and Test Frequency The Applicant provides communication tools software to control the EUT for staying in continuous transmitting (Duty Cycle more than 98%) and receiving mode for testing. All test performed at the low, middle and high of operational frequency range of each mode. Operation Frequency List WIFI on 5G Band： 20MHz 40MHz 80MHz Operating band Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) 36 5180 38 5190 U-NII 1 40 5200 -- -- (5150MHz-5250MHz) 44 5220 46 5230 48 5240 149 5745 151 5755 153 5765 U-NII 3 -- -- 157 5785 (5725MHz-5850MHz) 159 5795 161 5805 165 5825 -- -- -- -- Note: 1. “--“Means no channel(s) available any more. 2. The line display in grey is those Channels/Frequencies select to test is this report for each operation mode. Data Rate Used: Preliminary tests were performed in different data rate to find the worst radiated emission. The data rate shown in the table below is the worst-case rate with respect to the specific test item. Investigation has been done on all the possible configurations for searching the worst cases. The following table is a list of the test modes shown in this test report. Test Items Mode Data Rate Maximum Conducted Output Power 11a/OFDM 6 Mbps Power Spectral Density Emission Bandwidth(26dBm Bandwidth) 11n(20MHz),11ac(20MHz)/OFDM 7.2 Mbps Minimum Emission Bandwidth(6dBm Bandwidth) Undesirable emission Frequency Stability 11n(40MHz),11ac(40MHz)/OFDM 15.0Mbps

V1.0 Page 9 of 55 Report No.: CTL1705267012-WF-02 2.4. Equipments Used during the Test Calibration Calibration Test Equipment Manufacturer Model No. Serial No. Date Due Date LISN R&S ENV216 3560.6550.12 2017/05/20 2018/05/19 LISN R&S ESH2-Z5 860014/010 2017/05/20 2018/05/19 Power Meter Agilent U2531A TW53323507 2017/05/20 2018/05/19 Power Sensor Agilent U2021XA MY5365004 2017/05/20 2018/05/19 EMI Test Receiver R&S ESCI 103710 2017/05/20 2018/05/19 Spectrum Analyzer Agilent E4407B MY41440676 2017/05/20 2018/05/19 Spectrum Analyzer Agilent N9020 US46220290 2017/05/20 2018/05/19 Controller EM Controller EM Electronics N/A 2017/05/20 2018/05/19 1000 Active Loop Daze ZN30900A N/A 2017/05/20 2018/05/19 Antenna Sunol Sciences Bilog Antenna JB1 A061713 2017/05/20 2018/05/19 Corp. Sunol Sciences Horn Antenna DRH-118 A062013 2017/05/20 2018/05/19 Corp. Horn Antenna SCHWARZBACK BBHA 9170 BBHA9170184 2017/05/20 2018/05/19 Amplifier Agilent 8349B 3008A02306 2017/05/20 2018/05/19 Amplifier Agilent 8447D 2944A10176 2017/05/20 2018/05/19 Temperature/Humi Gangxing CTH-608 02 2017/05/20 2018/05/19 dity Meter 9SH10-2700/ High-Pass Filter K&L N/A 2017/05/20 2018/05/19 X12750-O/O 41H10-1375/ High-Pass Filter K&L N/A 2017/05/20 2018/05/19 U12750-O/O HUBER+SUHNE SUCOFLEX 2017/05/20 2018/05/19 Coaxial Cables 10m R 104PEA-10M HUBER+SUHNE SUCOFLEX 2017/05/20 2018/05/19 Coaxial Cables 3m R 104PEA-3M HUBER+SUHNE SUCOFLEX 2017/05/20 2018/05/19 Coaxial Cables 3m R 104PEA-3M RF Cable Megalon RF-A303 N/A 2017/05/20 2018/05/19 The calibration interval was one year 2.5. Related Submittal(s) / Grant (s) This submittal(s) (test report) is intended to comply with Section 15.407 of the FCC Part 15, Subpart E Rules. 2.6. Modifications No modifications were implemented to meet testing criteria.

V1.0 Page 10 of 55 Report No.: CTL1705267012-WF-02 3. TEST CONDITIONS AND RESULTS 3.1. Conducted Emissions Test LIMIT FCC CFR Title 47 Part 15 Subpart C Section 15.207 Limit (dBuV) Frequency range (MHz) Quasi-peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 * Decreases with the logarithm of the frequency. TEST CONFIGURATION TEST PROCEDURE 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. The EUT is a tabletop system; a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10:2013. 2. Support equipment, if needed, was placed as per ANSI C63.10:2013. 3. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10:2013. 4. The EUT received AC120V/60Hz power through a Line Impedance Stabilization Network (LISN) which supplied power source and was grounded to the ground plane. 5. All support equipments received AC power from a second LISN, if any. 6. The EUT test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. 7. Analyzer / Receiver scanned from 150 KHz to 30MHz for emissions in each of the test modes. 8. During the above scans, the emissions were maximized by cable manipulation.

V1.0 Page 11 of 55 Report No.: CTL1705267012-WF-02 TEST RESULTS Remark: 802.11a / 802.11n (HT20) / 802.11ac (HT20) / 802.11n (HT40) / 802.11ac (HT40) mode all have been tested, only worse case is reported Adapter 1:

SCAN TABLE: "Voltage (K—30M)FIN® Shozt Description: 150R—30M voltage LevefoBaM1 Lo so so 40 so 20 10 Frequency z) x x «is crnaroerszosfin MEASUREMENT RESULT: "CTL170614204_fin" 6/14/2017 11:57am Erequency Level Transd Limit Margin Detector Line PB wz aspy as aBay as 0.150000 47.30 10.2 se i8.7 or w cxp 0.358000 42.00 10.2 so i6.8 op w cxp 0.362000 40.70 10.2 so 18.0 gp w cup 0.526000 34.20 10.2 se 218 op w cxp 4940000 34. 90 10.4 se 211 op w cxp 8.246000 37.s0 10.6 so 221. ge w cxp MEASUREMENT RESULT: "CTL170614204_fin2" 6/14/2017 i1:s7am Frequency Level Transd Limit Margin Detector Line PB wz aspy as aBay as 0.362000 37.00 10.2 as 117. ay w cxp 0.410000 34.70 10.2 as 12.0. ay w cxp 0.508000 29.20 10.2 46 16.8 ay w cxp 0.628000 27.90 10.2 46 18.1. ay w cxp 4.962000 29.20 10.4 46 16.8 ay w cxp 8.552000 32.10 10.6 so 17.0. ay w cxp

SCAN TABLE: "Voltage (IK—30M)FIN® Short Description: 150R—30M voltage Level dBav) Frequency (riz] x x «ugs crmaronizess_fin MEASUREMENT RESULT: "CTL170712638_fin" 7/12/2017 in:liam Erequency Level Transd Limit Margin Detector Line PB wz aspy as amuy as 0.158000 45. 40 10.2 se 20.2° ge 2l cxp 0.418000 35.30 10.2 se 22.2° ge 2l cxp 0.422000 36.00 10.2 s7 ornl4 ge 11 cxp 4.520000 28.10 10.4 se 27.3 ge 11 cxp 9.728000 30. 60 10.6 so 2o.4 ge 1 cxp MEASUREMENT RESULT: "CTL170712638_fin2" 7/12/2017 in:liam Erequency Level Transd Limit Margin Detector Line PB wz aspy as amuy as 0.174000 30. 60 10.2 s5 24.2. av 2l cxp 0.374000 30.70 10.2 as 17.7. ay 11 cxp 0.426000 29.70 10.2 a7 17.6. ay 11 cxp 0.59000 .60 10.2 46 anld av 11 cxp 0.722000 .60 10.2 46 2440 av 11 cxp 4.778000 22.50 10.4 46 23.5 av 1 cxp

SCAN TABLE: "Voltage (9K—30M)FIN® Short Description: 150R—30M voltage Levelpopy) to so so «0 so 20 10 Frequency (rz] x x us cruzonizessin MEASUREMENT RESULT: "CTL170712639_fin" 7/12/2017 ii:24rm Erequency Level Transd Limit Margin Detector Line PB wz aspy as amuy as 0.158000 45. 60 10.2 se 20.0 gr w cip 0.162000 45.20 10.2 65 20.2 ge w cip 0. 422000 35.20 10.2 s7 22.2 ge w cip 4. 270000 27.10 10.4 se 28.3 ge w cip 9. 734000 32.30 10.6 so 27.7 ge w cip 12. 434000 30.10 10.6 so 20.3 ge w cip MEASUREMENT RESULT: "CTL170712639_fin2" 7/12/2017. ii:si4am Erequency Level Transd Limit Margin Detector Line PB mz aBpy as amuy as 0.166000 32.10 10.2 s5 22.5 av w cip 0174000 28 .90 10.2 s5 2s.9 av w cip 0. 406000 28 .70 10.2 as 10.0 ay w cip 0. 426000 28.30 10.2 a7 10.0 ay w cip 10. 324000 26.10 10.6 so 2s.9 av w cip 12.410000 24.20 10.6 so 25.0 av w cip

V1.0 Page 15 of 55 Report No.: CTL1705267012-WF-02 3.2. Undesirable Radiated Emissions Limit The maximum emissions outside of the frequency bands of operation shall be attenuated in accordance with the following limits: (1) For transmitters operating in the 5.15-5.25 GHz band: All emissions outside of the 5.15-5.35 GHz band shall not exceed an e.i.r.p. of −27 dBm/MHz. (2) For transmitters operating in the 5.25-5.35 GHz band: All emissions outside of the 5.15-5.35 GHz band shall not exceed an e.i.r.p. of −27 dBm/MHz. (3) For transmitters operating in the 5.47-5.725 GHz band: All emissions outside of the 5.47-5.725 GHz band shall not exceed an e.i.r.p. of −27 dBm/MHz. (4) For transmitters operating in the 5.725-5.85 GHz band: All emissions within the frequency range from the band edge to 10 MHz above or below the band edge shall not exceed an e.i.r.p. of −17 dBm/MHz; for frequencies 10 MHz or greater above or below the band edge, emissions shall not exceed an e.i.r.p. of −27 dBm/MHz. Undesirable emission limits Requirement Limit(EIRP) Limit (Field strength at 3m) Note3 15.407(b)(1) 15.407(b)(2) PK:-27(dBm/MHz) PK:68.2(dBμV/m) 15.407(b)(3) PK:-27(dBm/MHz)Note1 PK:68.2(dBμV/m)Note1 15.407(b)(4) PK:-17(dBm/MHz)Note2 PK:78.2(dBμV/m)Note2 Note1: For frequencies beyond 10MHz of band edge. Note2: For frequencies within10MHz of band edge. Note3: The following formula is used to convert the equipment isotropic radiated power (eirp) to field strength: 1000000 30 P E= μV/m, where P is the eirp (Watts) 3 (5) Unwanted emissions below 1 GHz must comply with the general field strength limits set forth in §15.209 (6)In addition, radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in §15.209(a) Radiated emission limits Frequency (MHz) Distance (Meters) Radiated (dBμV/m) Radiated (μV/m) 0.009-0.49 3 20log(2400/F(KHz))+40log(300/3) 2400/F(KHz) 0.49-1.705 3 20log(24000/F(KHz))+ 40log(30/3) 24000/F(KHz) 1.705-30 3 20log(30)+ 40log(30/3) 30 30-88 3 40.0 100 88-216 3 43.5 150 216-960 3 46.0 200 Above 960 3 54.0 500

V1.0 Page 16 of 55 Report No.: CTL1705267012-WF-02 TEST CONFIGURATION (A) Radiated Emission Test Set-Up, Frequency Below 30MHz (B) Radiated Emission Test Set-Up, Frequency below 1000MHz (C) Radiated Emission Test Set-Up, Frequency above 1000MHz

V1.0 Page 17 of 55 Report No.: CTL1705267012-WF-02 Test Procedure 1. Below 1GHz measurement the EUT is placed on a turntable which is 0.8m above ground plane, and above 1GHz measurement EUT was placed on a low permittivity and low loss tangent turn table which is 1.5m above ground plane. 2. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. 3. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. 4. The test-receiver system was set to peak and average detects function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. 5. Maximum procedure was performed by raising the receiving antenna from 1m to 4m and rotating the turn table from 0℃ to 360℃ to acquire the highest emissions from EUT 6. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 7. Repeat above procedures until all frequency measurements have been completed. TEST RESULTS Remark: 1. All 802.11a SISO mode / 802.11n (HT20) & 802.11ac (HT20) & 802.11n (HT40) & 802.11ac (HT40) MIMO modes have been tested for below 1GHz test, only the worst case 802.11ac (HT20) MIMO mode low channel of U-NII 1 band was recorded. 2. All 802.11a SISO mode / 802.11n (HT20) & 802.11ac (HT20) & 802.11n (HT40) & 802.11ac (HT40) MIMO modes have been tested for above 1GHz test, only the worst case 802.11ac (HT20) MIMO mode was recorded. 3. Radiated emission test from 9 KHz to 10th harmonic of fundamental was verified, and no emission found except system noise floor in 9 KHz to 30MHz and not recorded in this report.

V1.0 Page 18 of 55 Report No.: CTL1705267012-WF-02 For 30MHz-1GHz Horizontal Vertical

V1.0 Page 19 of 55 Report No.: CTL1705267012-WF-02 For 1GHz to 25GHz All 802.11a SISO mode / 802.11n (HT20) & 802.11ac (HT20) & 802.11n (HT40) & 802.11ac (HT40) MIMO modes have been tested for above 1GHz test, only the worst case 802.11ac (HT20) MIMO mode was recorded. U-NII 1 & 802.11ac (HT20) Mode (above 1GHz) Tested Frequency Emission Detector ANT Limit Margin Raw Antenna Cable Pre Correction Channel (MHz) Level Mode Pol (dBuV/m) (dB) Value Factor Factor amplifier Factor (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB/m) 5150.00 56.37 PK H 68.20 11.83 49.09 34.44 7.12 34.28 7.28 36.00 5150.00 49.14 AV H 54.00 4.86 41.86 34.44 7.12 34.28 7.28 (5180MHz) 10360.00 48.03 PK H 68.20 20.17 32.30 39.20 11.45 34.92 15.73 -- -- -- -- -- -- -- -- -- -- -- 40.00 10400.00 47.99 PK H 68.20 20.21 32.18 39.22 11.48 34.89 15.81 (5200MHz) -- -- -- -- -- -- -- -- -- -- -- 48.00 5350.50 53.48 PK H 68.20 14.72 46.45 34.23 7.36 34.56 7.03 (5240MHz) 10480.00 47.83 PK H 68.20 20.37 30.68 39.41 11.83 34.09 17.15 -- -- -- -- -- -- -- -- -- -- -- Tested Frequency Emission Detector ANT Limit Margin Raw Antenna Cable Pre Correction Channel (MHz) Level Mode Pol (dBuV/m) (dB) Value Factor Factor amplifier Factor (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB/m) 5150.00 56.45 PK V 68.20 11.75 49.17 34.44 7.12 34.28 7.28 36.00 5150.00 48.74 AV V 54.00 5.26 41.46 34.44 7.12 34.28 7.28 (5180MHz) 10360.00 48.99 PK V 68.20 19.21 33.26 39.20 11.45 34.92 15.73 -- -- -- -- -- -- -- -- -- -- -- 40.00 10400.00 48.26 PK V 68.20 19.94 32.45 39.22 11.48 34.89 15.81 (5200MHz) -- -- -- -- -- -- -- -- -- -- -- 48.00 5350.50 52.93 PK V 68.20 15.27 45.90 34.23 7.36 34.56 7.03 (5240MHz) 10480.00 47.92 PK V 68.20 20.28 30.77 39.41 11.83 34.09 17.15 -- -- -- -- -- -- -- -- -- -- -- U-NII 3 & 802.11ac (HT20) Mode (above 1GHz) Tested Frequency Emission Detector ANT Limit Margin Raw Antenna Cable Pre Correction Channel (MHz) Level Mode Pol (dBuV/m) (dB) Value Factor Factor amplifier Factor (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB/m) 5725.00 56.12 PK H 68.20 12.08 48.39 34.79 7.43 34.49 7.73 149 5725.00 48.97 AV H 54.00 5.03 41.24 34.79 7.43 34.49 7.73 10950.00 49.51 PK H 68.20 18.69 32.46 39.53 11.97 34.45 17.05 (5745MHz) -- -- -- -- -- -- -- -- -- -- -- 157 11570.00 48.07 PK H 68.20 20.13 29.62 39.71 13.05 34.31 18.45 (5785MHz) -- -- -- -- -- -- -- -- -- -- -- 5850.00 52.95 PK H 68.20 15.25 45.17 34.81 7.51 34.54 7.78 165 5850.00 47.18 AV H 54.00 6.82 39.40 34.81 7.51 34.54 7.78 11650.00 48.42 PK H 68.20 19.78 29.80 39.73 13.19 34.30 18.62 (5825MHz) -- -- -- -- -- -- -- -- -- -- -- Tested Frequency Emission Detector ANT Limit Margin Raw Antenna Cable Pre Correction Channel (MHz) Level Mode Pol (dBuV/m) (dB) Value Factor Factor amplifier Factor (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB/m) 5725.00 56.44 PK V 68.20 11.76 48.71 34.79 7.43 34.49 7.73 149 5725.00 48.65 AV V 54.00 5.35 40.92 34.79 7.43 34.49 7.73 10950.00 48.71 PK V 68.20 19.49 31.66 39.53 11.97 34.45 17.05 (5745MHz) -- -- -- -- -- -- -- -- -- -- -- 157 11570.00 49.01 PK V 68.20 19.19 30.56 39.71 13.05 34.31 18.45 (5785MHz) -- -- -- -- -- -- -- -- -- -- -- 5850.00 57.07 PK V 68.20 11.13 49.29 34.81 7.51 34.54 7.78 165 5850.00 48.01 AV V 54.00 5.99 40.23 34.81 7.51 34.54 7.78 11650.00 48.11 PK V 68.20 20.09 29.49 39.73 13.19 34.30 18.62 (5825MHz) -- -- -- -- -- -- -- -- -- -- --

V1.0 Page 20 of 55 Report No.: CTL1705267012-WF-02 REMARKS: 1. Emission level (dBuV/m) =Raw Value (dBuV)+Correction Factor (dB/m) 2. Correction Factor (dB/m) = Antenna Factor (dB/m)+Cable Factor (dB)-Pre-amplifier Factor 3. Margin value = Limit value- Emission level. 4. -- Mean the other emission levels were very low against the limit. 5. RBW1MHz VBW3MHz Peak detector is for PK value; RMS detector is for AV value.


Document Created: 2017-09-19 11:55:45
Document Modified: 2017-09-19 11:55:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC