Test report part 1

FCC ID: 2AL9D-FTA1101

Test Report

Download: PDF
FCCID_3421324

Shenzhen CTL Testing Technology Co., Ltd. Tel: +86-755-89486194 E-mail: ctl@ctl-lab.com TEST REPORT FCC PART 15.247 Report Reference No. .................: CTL1703037071-WF Compiled by: Allen Wang ( position+printed name+signature) (File administrators) Tested by: Nice Nong ( position+printed name+signature) (Test Engineer) Approved by: ( position+printed name+signature) Ivan Xie (Manager) Product Name..............................: VoIP Wireless ATA Model/Type reference .................: FTA1101 Brand Name.................................: Flyingvoice FCC ID ..........................................: 2AL9D-FTA1101 Applicant’s name ........................: Flyingvoice Network Technology Co., Ltd Address of applicant ..................: Room102, 1F East, Bldg 3#, Minqi Park, Pingshan, Xili, Nanshan District, Shenzhen, China Test Firm ......................................: Shenzhen CTL Testing Technology Co., Ltd. Floor 1-A, Baisha Technology Park, No.3011, Shahexi Road, Address of Test Firm ..................: Nanshan District, Shenzhen, China 518055 Test specification ........................: FCC Part 15.247: Operation within the bands 902-928 MHz, Standard........................................: 2400-2483.5 MHz and 5725-5850 MHz. TRF Originator ..............................: Shenzhen CTL Testing Technology Co., Ltd. Master TRF ...................................: Dated 2011-01 Date of Receipt............................: May 02, 2017 Date of Test Date .........................: May 02, 2017–May 18, 2017 Data of Issue................................: May 24, 2017 Result ...........................................: Positive Shenzhen CTL Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context.

V1.0 Page 2 of 54 Report No.: CTL1703037071-WF TEST REPORT May 24, 2017 Test Report No. : CTL1703037071-WF Date of issue Equipment under Test : VoIP Wireless ATA Model /Type : FTA1101 Applicant : Flyingvoice Network Technology Co., Ltd : Room102, 1F East, Bldg 3#, Minqi Park, Pingshan, Address Xili, Nanshan District, Shenzhen, China Manufacturer : Flyingvoice Network Technology Co., Ltd : Room102, 1F East, Bldg 3#, Minqi Park, Pingshan, Address Xili, Nanshan District, Shenzhen, China Test result Pass * * In the configuration tested, the EUT complied with the standards specified page 5. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory.

V1.0 Page 3 of 54 Report No.: CTL1703037071-WF ** Modified History ** Revisions Description Issued Data Report No. Remark Version 1.0 Initial Test Report Release 2017-05-24 CTL1703037071-WF Tracy Qi

V1.0 Page 4 of 54 Report No.: CTL1703037071-WF Table of Contents Page 1. SUMMARY............................................................................................................................................................ 5 1.1. TEST STANDARDS.....................................................................................................................................................5 1.2. TEST DESCRIPTION ........................................................................................................................................................5 1.3. TEST FACILITY ..............................................................................................................................................................6 1.4. STATEMENT OF THE MEASUREMENT UNCERTAINTY ...............................................................................................................6 1.5. ENVIRONMENTAL CONDITIONS ........................................................................................................................................7 1.6. GENERAL DESCRIPTION OF EUT ......................................................................................................................................7 2. DESCRIPTION OF TEST MODES AND TEST FREQUENCY ........................................................................................... 7 2.1. EQUIPMENTS USED DURING THE TEST ..............................................................................................................................9 2.2. RELATED SUBMITTAL(S) / GRANT (S)................................................................................................................................9 2.3. MODIFICATIONS .........................................................................................................................................................10 3. TEST CONDITIONS AND RESULTS ......................................................................................................................... 11 3.1. CONDUCTED EMISSIONS TEST .......................................................................................................................................11 3.2. RADIATED EMISSIONS AND BAND EDGE ..........................................................................................................................14 3.3. MAXIMUM CONDUCTED OUTPUT POWER.......................................................................................................................17 3.4. POWER SPECTRAL DENSITY ..........................................................................................................................................22 3.5. 6DB BANDWIDTH .......................................................................................................................................................27 3.6. OUT-OF-BAND EMISSIONS ...........................................................................................................................................32 3.7. ANTENNA REQUIREMENT .............................................................................................................................................48 4. TEST SETUP PHOTOS OF THE EUT ........................................................................................................................ 49 5. EXTERNAL AND INTERNAL PHOTOS OF THE EUT .................................................................................................. 51

V1.0 Page 5 of 54 Report No.: CTL1703037071-WF 1. SUMMARY 1.1. TEST STANDARDS The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz ANSI C63.10:2013 : American National Standard for Testing Unlicensed Wireless Devices ANSI C63.4: 2014: –American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40GHz Range of 9 kHz to 40GHz 558074 D01 DTS Meas Guidance v04 : Guidance for Performing Compliance Measurements on Digital Transmission Systems (DTS) Operating Under §15.247 KDB 662911: D01Emissions Testing of Transmitters with Multiple Outputs in the Same Band 1.2. Test Description FCC PART 15.247 FCC Part 15.207 AC Power Conducted Emission PASS FCC Part 15.247(a)(2) 6dB Bandwidth PASS FCC Part 15.247(d) Spurious RF Conducted Emission PASS FCC Part 15.247(b) Maximum Conducted Output Power PASS FCC Part 15.247(e) Power Spectral Density PASS FCC Part 15.109/ 15.205/ 15.209 Radiated Emissions PASS FCC Part 15.247(d) Band Edge PASS FCC Part 15.203/15.247 (b) Antenna Requirement PASS

V1.0 Page 6 of 54 Report No.: CTL1703037071-WF 1.3. Test Facility 1.3.1 Address of the test laboratory Shenzhen CTL Testing Technology Co., Ltd. Floor 1-A, Baisha Technology Park, No. 3011, Shahexi Road, Nanshan, Shenzhen 518055 China There is one 3m semi-anechoic chamber and two line conducted labs for final test. The Test Sites meet the requirements in documents ANSI C63.4 and CISPR 22/EN 55022 requirements. 1.3.2 Laboratory accreditation The test facility is recognized, certified, or accredited by the following organizations: IC Registration No.: 9618B The 3m alternate test site of Shenzhen CTL Testing Technology Co., Ltd. EMC Laboratory has been registered by Certification and Engineer Bureau of Industry Canada for the performance of with Registration No.: 9618B on November 13, 2013. FCC-Registration No.: 970318 Shenzhen CTL Testing Technology Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration 970318, December 19, 2013. 1.4. Statement of the measurement uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was calculated for all measurements listed in this test report acc. to CISPR 16 - 4 “Specification for radio disturbance and immunity measuring apparatus and methods – Part 4: Uncertainty in EMC Measurements“ and is documented in the Shenzhen CTL Testing Technology Co., Ltd. quality system acc. to DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. Hereafter the best measurement capability for CTL laboratory is reported: Measurement Test Notes Uncertainty Transmitter power conducted ±0.57 dB (1) Transmitter power Radiated ±2.20 dB (1) Conducted spurious emission 9KHz-40 GHz ±2.20 dB (1) Occupied Bandwidth ±0.01ppm (1) Radiated Emission 30~1000MHz ±4.10dB (1) Radiated Emission Above 1GHz ±4.32dB (1) Conducted Disturbance0.15~30MHz ±3.20dB (1) (1) This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2.

V1.0 Page 7 of 54 Report No.: CTL1703037071-WF 1.5. Environmental conditions During the measurement the environmental conditions were within the listed ranges: Normal Temperature: 25°C Relative Humidity: 55 % Air Pressure: 101 kPa 1.6. General Description of EUT Product Name: VoIP Wireless ATA Model/Type reference: FTA1101 Power supply: AC 120V/60Hz WIFI Supported type: 802.11b/802.11g/802.11n(H20)/802.11n(H40) 802.11b: DSSS Modulation: 802.11g/802.11n(H20)/802.11n(H40): OFDM 802.11b/802.11g/802.11n(H20): 2412MHz~2462MHz Operation frequency: 802.11n(H40): 2422MHz~2452MHz 802.11b/802.11g/802.11n(H20): 11 Channel number: 802.11n(H40): 7 Channel separation: 5MHz Antenna type: PCB Antenna : 2 Antenna gain: 2.0dBi Note: 802.11b/802.11g have SISO mode only ;802.11n(H20)/802.11n(H40) have MIMO mode only Directional gain =2+10log 2=5.01dBi 2. Description of Test Modes and Test Frequency The Applicant provides communication tools software to control the EUT for staying in continuous transmitting (Duty Cycle more than 98%) and receiving mode for testing. Operation Frequency WIFI： Channel Frequency(MHz) Channel Frequency(MHz) 1 2412 8 2447 2 2417 9 2452 3 2422 10 2457 4 2427 11 2462 5 2432 6 2437 7 2442 Note: The line display in grey were the channel selected for testing

V1.0 Page 8 of 54 Report No.: CTL1703037071-WF Data Rate Used: Preliminary tests were performed in different data rate to find the worst radiated emission. The data rate shown in the table below is the worst-case rate with respect to the specific test item. Investigation has been done on all the possible configurations for searching the worst cases. The following table is a list of the test modes shown in this test report. Test Items Mode Data Rate Channel 11b/DSSS 1 Mbps 1/6/11 Maximum Conducted Output Power Power Spectral Density 11g/OFDM 6 Mbps 1/6/11 6dB Bandwidth Spurious RF conducted emission 11n(20MHz)/OFDM 6.5Mbps 1/6/11 Radiated Emission 9kHz~1GHz& Radiated Emission 1GHz~10th Harmonic 11n(40MHz)/OFDM 13.5 Mbps 3/6/9 11b/DSSS 1 Mbps 1/11 11g/OFDM 6 Mbps 1/11 Band Edge 11n(20MHz)/OFDM 6.5Mbps 1/11 11n(40MHz)/OFDM 13.5 Mbps 3//9 Note: All tests performed with alternate AC power sulpply and DC power supply , recorded the worst case at AC mode

V1.0 Page 9 of 54 Report No.: CTL1703037071-WF 2.1. Equipments Used during the Test Calibration Calibration Test Equipment Manufacturer Model No. Serial No. Date Due Date ULTRA-ROADBAND Sunol Sciences JB1 A061713 2016/06/02 2017/06/01 ANTENNA Corp. EMI Test Receiver R&S ESCI 103710 2016/06/02 2017/06/01 Spectrum Analyzer Agilent E4407B MY41440676 2016/05/21 2017/05/20 Controller Controller EM Electronics N/A 2016/05/21 2017/05/20 EM 1000 Sunol Sciences Horn Antenna DRH-118 A062013 2016/05/19 2017/05/18 Corp. Active Loop Antenna Daze ZN30900A N/A 2016/05/19 2017/05/18 3560.6550.1 LISN R&S ENV216 2016/06/02 2017/06/01 2 LISN R&S ESH2-Z5 860014/010 2016/06/02 2017/06/01 F-071115-1 ISN FCC 11229 2016/05/19 2017/05/18 057-1-09 Amplifier Agilent 8349B 3008A02306 2016/05/19 2017/05/18 Amplifier Agilent 8447D 2944A10176 2016/05/19 2017/05/18 VTSD Transient Limiter SCHWARZCECK 9666 2016/06/02 2017/06/01 9561F Radio Communication R&S CMU200 115419 2016/05/22 2017/05/21 Tester Temperature/Humidit Gangxing CTH-608 02 2016/05/20 2017/05/19 y Meter SIGNAL Agilent E4421B US40051744 2016/05/20 2017/05/19 GENERATOR Power Meter Agilent U2531A TW53323507 2016/05/21 2017/05/20 Power Sensor Agilent U2021XA MY5365004 2016/05/21 2017/05/20 Climate Chamber ESPEC EL-10KA A20120523 2016/05/20 2017/05/19 9SH10-270 High-Pass Filter K&L 0/X12750-O N/A 2016/05/20 2017/05/19 /O 41H10-137 High-Pass Filter K&L 5/U12750-O N/A 2016/05/20 2017/05/19 /O HUBER+SUHNE RF Cable RG214 N/A 2016/05/20 2017/05/19 R

V1.0 Page 10 of 54 Report No.: CTL1703037071-WF 2.2. Related Submittal(s) / Grant (s) This submittal(s) (test report) is intended for FCC ID: 2AL9D-FTA1101 filing to comply with Section 15.247 of the FCC Part 15, Subpart C Rules. 2.3. Modifications No modifications were implemented to meet testing criteria.

V1.0 Page 11 of 54 Report No.: CTL1703037071-WF 3. TEST CONDITIONS AND RESULTS 3.1. Conducted Emissions Test LIMIT FCC CFR Title 47 Part 15 Subpart C Section 15.207 Limit (dBuV) Frequency range (MHz) Quasi-peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 * Decreases with the logarithm of the frequency. TEST CONFIGURATION TEST PROCEDURE 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. The EUT is a tabletop system; a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10:2013. 2. Support equipment, if needed, was placed as per ANSI C63.10:2013. 3. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10:2013. 4. The adapter received AC120V/60Hz power through a Line Impedance Stabilization Network (LISN) which supplied power source and was grounded to the ground plane. 5. All support equipments received AC power from a second LISN, if any. 6. The EUT test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. 7. Analyzer / Receiver scanned from 150 KHz to 30MHz for emissions in each of the test modes. 8. During the above scans, the emissions were maximized by cable manipulation.

SCAN TABLE: "Voltace (9K—30M) FIN® Short Description: 150R—30M voltage Level y To 8 sook. soo% in am Frequency z) x x xigs craresoscos tin MEASUREMENT RESULT: "CTL170503008_fin" s/3/2017 2:309M rrequency Level Transd Limit Margin Detector Line PB wrz depy as aBuv as 0.572000 s1.60 10.2 5e 4240 o L1 cxp 0578000 s1.10 10.2 se 4.9 op 11— cup 1.172000 37.80 10.3 se 18.2 op 11— cup 1.178000 38.70 10.3 se 17.3 op 11— cup 10.388000 44.80 10.6 eo 15.2 op 11— cup 10.952000 45.10 10.6 eo 14.9. op 11— cup MEASUREMENT RESULT: "CTL170503008_fin2" s/3/2017 2:309M Frequency Level Transd Limit Margin Detector Line PB wrz depy as aBuv as 0578000 38.90 10.2 46 74 ay 11— cup 0908000 29.20 10.2 46 16.8 ay 11— cup 1.184000 27.60 10.3 46 18.40 ay 11— cup 2.768000 27.40 10.4 46 i8.6) ay 11— cup 10.682000 32.40 10.6 so i7.6. ay 11— cup

SCAN TABLE: "Voltage (9K—30M)FIN® Short Description: 150R—30M voltage Level y 5 150k 300k 400 6o0k. 800% 1M 2M on ahn. on 6M oh. TOM 20M 30M Frequency (Hz] x x «ies crazososoosen MEASUREMENT RESULT: "CTL170503009_fin" s/3/2017 2i42mM Frequency Level Transd Limit Margin Detector Line PB ane aspy as aBuv as 0.572000 si.80 10.2 se 2 op w cxp o.8s4000 39.50 10.2 se 15 op w cxp 1.1s4000 42.20 10.3 se 18 op w cxp 1.166000 44.00 10.3 se .0 op w cxp 1.214000 40.80 10.3 se .2 op w cxp 2.582000 35.90 10.4 se 10 o w cxp MEASUREMENT RESULT: "CTL170503009_fin2" s/3/2017 2i42mM Frequency Level Transd Limit Margin Detector Line PB mz aBpy as aBuy as 0.470000 34.80 10.2 a7 17 ay w cxp 0.572000 44.50 10.2 S 150 ay w cxp 0.920000 34.00 10.3 46 .0 ay w cxp 1.274000 33.30 10.3 46 170 ay w cxp 1.5se000 31.90 10.3 46 4 ay w cxp 2.012000 33.80 10.4 46 .20 av w cxp

V1.0 Page 14 of 54 Report No.: CTL1703037071-WF 3.2. Radiated Emissions and Band Edge Limit For intentional device, according to § 15.209(a), the general requirement of field strength of radiated emission out of authorized band shall not exceed the following table at a 3 meters measurement distance. FCC PART 15.249(d) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in §15.209, whichever is the lesser attenuation. In addition, radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in §15.209(a) Radiated emission limits Frequency (MHz) Distance (Meters) Radiated (dBμV/m) Radiated (μV/m) 0.009-0.49 3 20log(2400/F(KHz))+40log(300/3) 2400/F(KHz) 0.49-1.705 3 20log(24000/F(KHz))+ 40log(30/3) 24000/F(KHz) 1.705-30 3 20log(30)+ 40log(30/3) 30 30-88 3 40.0 100 88-216 3 43.5 150 216-960 3 46.0 200 Above 960 3 54.0 500 TEST CONFIGURATION (A) Radiated Emission Test Set-Up, Frequency Below 30MHz (B) Radiated Emission Test Set-Up, Frequency below 1000MHz

V1.0 Page 15 of 54 Report No.: CTL1703037071-WF (C) Radiated Emission Test Set-Up, Frequency above 1000MHz Test Procedure 1. Below 1GHz measurement the EUT is placed on a turntable which is 0.8m above ground plane, and above 1GHz measurement EUT was placed on a low permittivity and low loss tangent turn table which is 1.5m above ground plane. 2. Maximum procedure was performed by raising the receiving antenna from 1m to 4m and rotating the turn table from 0℃ to 360℃ to acquire the highest emissions from EUT 3. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 4. Repeat above procedures until all frequency measurements have been completed. TEST RESULTS Remark: 1. We tested three channels (lowest/middle/highest) of each mode and recorded worst case at 802.11b low channel for measurement below 1GHz. 2. We tested three channels (lowest/middle/highest) of each mode and recorded worst case at 802.11b mode above 1GHz. 3. Radiated emission test from 9 KHz to 10th harmonic of fundamental was verified, and no emission found except system noise floor in 9 KHz to 30MHz and not recorded in this report.

V1.0 Page 16 of 54 Report No.: CTL1703037071-WF For 30MHz-1GHz Horizontal Vertical

V1.0 Page 17 of 54 Report No.: CTL1703037071-WF For 1GHz to 25GHz 802.11b Mode (above 1GHz) Frequency(MHz): 2412 Polarity: HORIZONTAL Pre- Frequency Emission Limit Margin Raw Antenna Cable Correction amplifier (MHz) Level (dBuV/m) (dB) Value Factor Factor (dB) Factor (dBuV/m) (dBuV) (dB/m) (dB) (dB/m) 4824.00 58.43 PK 74 15.57 53.88 33.52 6.92 35.89 4.55 4824.00 51.02 AV 54 2.98 46.47 33.52 6.92 35.89 4.55 5128.15 50.36 PK 74 23.64 43.16 34.38 7.10 34.28 7.20 5128.15 -- AV 54 -- -- -- -- -- -- 7236.00 48.79 PK 74 25.21 37.52 37.1 9.19 35.02 11.27 7236.00 -- AV 54 -- -- -- -- -- -- Frequency(MHz): 2412 Polarity: VERTICAL Pre- Frequency Emission Limit Margin Raw Antenna Cable Correction amplifier (MHz) Level (dBuV/m) (dB) Value Factor Factor (dB) Factor (dBuV/m) (dBuV) (dB/m) (dB) (dB/m) 4824.00 60.04 PK 74 13.96 55.49 33.52 6.92 35.89 4.55 4824.00 52.81 AV 54 1.19 48.26 33.52 6.92 35.89 4.55 5128.15 51.83 PK 74 22.17 44.63 34.38 7.10 34.28 7.20 5128.15 -- AV 54 -- -- -- -- -- -- 7236.00 49.48 PK 74 24.52 38.21 37.1 9.19 35.02 11.27 7236.00 -- AV 54 -- -- -- -- -- -- Frequency(MHz): 2437 Polarity: HORIZONTAL Pre- Frequency Emission Limit Margin Raw Antenna Cable Correction amplifier (MHz) Level (dBuV/m) (dB) Value Factor Factor (dB) Factor (dBuV/m) (dBuV) (dB/m) (dB) (dB/m) 4874.00 59.46 PK 74 14.54 53.22 33.59 6.95 34.3 6.24 4874.00 51.21 AV 54 2.79 44.97 33.59 6.95 34.3 6.24 5215.50 48.36 PK 74 25.64 40.76 34.56 7.15 34.11 7.60 5215.50 -- AV 54 -- -- -- -- -- -- 7311.00 48.53 PK 74 25.47 36.87 37.44 9.22 35 11.66 7311.00 -- AV 54 -- -- -- -- -- -- Frequency(MHz): 2437 Polarity: VERTICAL Pre- Frequency Emission Limit Margin Raw Antenna Cable Correction amplifier (MHz) Level (dBuV/m) (dB) Value Factor Factor (dB) Factor (dBuV/m) (dBuV) (dB/m) (dB) (dB/m) 4874.00 59.73 PK 74 14.27 53.39 33.59 6.95 34.2 6.34 4874.00 52.01 AV 54 1.99 45.67 33.59 6.95 34.2 6.34 5215.50 48.86 PK 74 25.14 41.96 34.07 7.05 34.22 6.90 5215.50 -- AV 54 -- -- -- -- -- -- 7311.00 49.95 PK 74 24.05 38.29 37.44 9.22 35 11.66 7311.00 -- AV 54 -- -- -- -- -- --

V1.0 Page 18 of 54 Report No.: CTL1703037071-WF Frequency(MHz): 2462 Polarity: HORIZONTAL Pre- Frequency Emission Limit Margin Raw Antenna Cable Correction amplifier (MHz) Level (dBuV/m) (dB) Value Factor Factor (dB) Factor (dBuV/m) (dBuV) (dB/m) (dB) (dB/m) 4924.00 59.39 PK 74 14.61 53.55 33.71 6.98 35.91 4.78 4924.00 49.45 AV 54 4.55 43.73 33.71 6.98 35.91 4.78 5235.50 51.08 PK 74 22.92 41.24 34.34 7.09 34.27 7.17 5235.50 -- AV 54 -- -- -- -- -- -- 7386.00 48.24 PK 74 25.76 37.4 37.61 9.25 34.98 11.88 7386.00 -- AV 54 -- -- -- -- -- -- Frequency(MHz): 2462 Polarity: VERTICAL Pre- Frequency Emission Limit Margin Raw Antenna Cable Correction amplifier (MHz) Level (dBuV/m) (dB) Value Factor Factor (dB) Factor (dBuV/m) (dBuV) (dB/m) (dB) (dB/m) 4924.00 60.19 PK 74 13.81 55.41 33.71 6.98 35.91 4.78 4924.00 51.66 AV 54 2.34 46.88 33.71 6.98 35.91 4.78 5235.50 48.47 PK 74 25.53 41.3 34.34 7.09 34.27 7.17 5235.50 -- AV 54 -- -- -- -- -- -- 7386.00 48.92 PK 74 25.08 37.04 37.61 9.25 34.98 11.88 7386.00 -- AV 54 -- -- -- -- -- -- REMARKS: 1. Emission level (dBuV/m) =Raw Value (dBuV)+Correction Factor (dB/m) 2. Correction Factor (dB/m) = Antenna Factor (dB/m)+Cable Factor (dB)-Pre-amplifier Factor 3. Margin value = Limit value- Emission level. 4. -- Mean the PK detector measured value is below average limit. 5. The other emission levels were very low against the limit. 6. RBW1MHz VBW3MHz Peak detector is for PK value; RMS detector is for AV value. Note： 802.11b/802.11g Ant 1 Ant 2 SISO mode and 802.11n H20 &H40 MIMO mode all have been tested, only worse case 802.11b Ant 1 is reported

V1.0 Page 19 of 54 Report No.: CTL1703037071-WF Results of Band Edges Test (Radiated) Frequency(MHz): 2412 Polarity: HORIZONTAL Pre- Frequency Emission Limit Margin Raw Antenna Cable Correction amplifier (MHz) Level (dBuV/m) (dB) Value Factor Factor (dB) Factor (dBuV/m) (dBuV) (dB/m) (dB) (dB/m) 2412.00 113.49 PK -- -- 80.1 28.78 4.61 0 33.39 2412.00 107.04 AV -- -- 73.65 28.78 4.61 0 33.39 2361.75 42.18 PK 74 31.82 9.1 28.52 4.56 0 33.08 2361.75 -- AV 54 -- -- -- -- -- -- 2390.00 60.07 PK 74 13.93 26.75 28.72 4.60 0 33.32 2390.00 52.36 AV 54 1.64 19.04 28.72 4.60 0 33.32 2400.00 61.12 PK 74 12.88 27.73 28.78 4.61 0 33.39 2400.00 52.96 AV 54 1.04 19.57 28.78 4.61 0 33.39 Frequency(MHz): 2412 Polarity: VERTICAL Pre- Frequency Emission Limit Margin Raw Antenna Cable Correction amplifier (MHz) Level (dBuV/m) (dB) Value Factor Factor (dB) Factor (dBuV/m) (dBuV) (dB/m) (dB) (dB/m) 2412.00 114.05 PK -- -- 80.66 28.78 4.61 0 33.39 2412.00 106.36 AV -- -- 72.97 28.78 4.61 0 33.39 2361.75 43.02 PK 74 30.98 9.94 28.52 4.56 0 33.08 2361.75 -- AV 54 -- -- -- -- -- -- 2390.00 60.94 PK 74 13.06 27.62 28.72 4.60 0 33.32 2390.00 51.18 AV 54 2.82 17.86 28.72 4.60 0 33.32 2400.00 62.32 PK 74 11.68 28.93 28.78 4.61 0 33.39 2400.00 52.91 AV 54 1.09 19.52 28.78 4.61 0 33.39 Frequency(MHz): 2462 Polarity: HORIZONTAL Pre- Frequency Emission Limit Margin Raw Antenna Cable Correction amplifier (MHz) Level (dBuV/m) (dB) Value Factor Factor (dB) Factor (dBuV/m) (dBuV) (dB/m) (dB) (dB/m) 2462.00 114.06 PK -- -- 80.44 28.92 4.7 0 33.62 2462.00 108.91 AV -- -- 75.29 28.92 4.7 0 33.62 2483.50 43.14 PK 74 30.86 9.51 28.93 4.7 0 33.63 2483.50 -- AV 54 -- -- -- -- -- -- 2486.75 42.38 PK 74 31.62 8.74 28.94 4.71 0 33.64 2486.75 -- AV 54 -- -- -- -- -- -- 2500.00 43.55 PK 74 30.45 9.87 28.96 4.72 0 33.68 2500.00 -- AV 54 -- -- -- -- -- --

V1.0 Page 20 of 54 Report No.: CTL1703037071-WF Frequency(MHz): 2462 Polarity: VERTICAL Pre- Frequency Emission Limit Margin Raw Antenna Cable Correction amplifier (MHz) Level (dBuV/m) (dB) Value Factor Factor (dB) Factor (dBuV/m) (dBuV) (dB/m) (dB) (dB/m) 2462.00 113.18 PK -- -- 79.56 28.92 4.7 0 33.62 2462.00 107.25 AV -- -- 73.63 28.92 4.7 0 33.62 2483.50 43.04 PK 74 30.96 9.41 28.93 4.7 0 33.63 2483.50 -- AV 54 -- -- -- -- -- -- 2486.75 44.18 PK 74 29.82 10.54 28.94 4.71 0 33.64 2486.75 -- AV 54 -- -- -- -- -- -- 2500.00 43.67 PK 74 30.33 9.99 28.96 4.72 0 33.68 2500.00 -- AV 54 -- -- -- -- -- -- REMARKS: 1. Emission level (dBuV/m) =Raw Value (dBuV)+Correction Factor (dB/m) 2. Correction Factor (dB/m) = Antenna Factor (dB/m)+Cable Factor (dB)-Pre-amplifier Factor 3. Margin value = Limit value- Emission level. 4. -- Mean the PK detector measured value is below average limit. 5. The other emission levels were very low against the limit. 6. RBW1MHz VBW3MHz Peak detector is for PK value; RMS detector is for AV value. Note： 802.11b/802.11g Ant 1 Ant 2 SISO mode and 802.11n H20 &H40 MIMO mode all have been tested, only worse case 802.11b Ant 1 is reported

V1.0 Page 21 of 54 Report No.: CTL1703037071-WF 3.3. Maximum Conducted Output Power Limit The Maximum Peak Output Power Measurement is 30dBm. Test Procedure Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the power sensor. Test Configuration EUT Power Sensor Power Meter Test Results WIFI Output PK Output PK Output power Limit Type Channel power Ant1 power Ant2 Total Result (dBm) (dBm) (dBm) (dBm) 01 16.04 16.39 / 802.11b 06 16.11 16.44 / 30.00 Pass 11 16.32 16.48 / 01 14.99 14.12 / 802.11g 06 14.96 14.10 / 30.00 Pass 11 14.17 14.19 / 01 13.70 13.09 16.42 802.11n(HT20) 06 13.74 12.98 16.39 30.00 Pass MIMO 11 13.92 13.12 16.55 03 12.76 12.99 15.89 802.11n(HT40) 06 12.98 12.98 15.99 30.00 Pass MIMO 09 12.79 12.07 15.46 Note: 1.The test results including the cable lose.

V1.0 Page 22 of 54 Report No.: CTL1703037071-WF 3.4. Power Spectral Density Limit For digitally modulated systems, the power spectral density conducted from the intentional radiator to the antenna shall not be greater than 8 dBm in any 3 kHz band during any time interval of continuous transmission. Test Procedure 1. Use this procedure when the maximum peak conducted output power in the fundamental emission is used to demonstrate compliance. 2. Set the RBW ≥ 3 kHz. 3. Set the VBW ≥ 3× RBW. 4. Set the span to 1.5 times the DTS channel bandwidth. 5. Detector = peak. 6. Sweep time = auto couple. 7. Trace mode = max hold. 8. Allow trace to fully stabilize. 9. Use the peak marker function to determine the maximum power level. 10. If measured value exceeds limit, reduce RBW (no less than 3 kHz) and repeat. 11. The resulting peak PSD level must be 8dBm. Test Configuration EUT SPECTRUM ANALYZER Test Results WIFI Power Power Power Spectral Spectral Spectral Limit Type Channel Result Density Ant1 Density Ant2 Density Total (dBm/3KHz) (dBm/3KHz) (dBm/3KHz) (dBm/3KHz) 01 -5.866 -5.494 / 802.11b 06 -5.864 -5.753 / 8.00 Pass 11 -5.788 -5.424 / 01 -11.896 -11.540 / 802.11g 06 -11.294 -10.818 / 8.00 Pass 11 -11.647 -11.462 / 01 -11.371 -11.066 -8.21 802.11n(HT20) 06 -10.178 -11.110 -7.61 8.00 Pass MIMO 11 -9.800 -11.039 -7.37 03 -14.874 -14.573 -11.71 802.11n(HT40) 06 -15.497 -14.541 -11.98 8.00 Pass MIMO 09 -15.752 -13.664 -11.57 Test plot as follows:

V1.0 Page 23 of 54 Report No.: CTL1703037071-WF Ant1 802.11b 802.11g CH01 CH01 CH06 CH06 CH11 CH11

V1.0 Page 24 of 54 Report No.: CTL1703037071-WF 802.11n(HT20) 802.11n(HT40) CH01 CH03 CH06 CH06 CH11 CH09

V1.0 Page 25 of 54 Report No.: CTL1703037071-WF Ant 2 802.11b 802.11g CH01 CH01 CH06 CH06 CH11 CH11

V1.0 Page 26 of 54 Report No.: CTL1703037071-WF 802.11n(HT20) 802.11n(HT40) CH01 CH03 CH06 CH06 CH11 CH09

V1.0 Page 27 of 54 Report No.: CTL1703037071-WF 3.5. 6dB Bandwidth Limit For digital modulation systems, the minimum 6 dB bandwidth shall be at least 500 kHz Test Procedure The transmitter output was connected to the spectrum analyzer through an attenuator. The bandwidth of the fundamental frequency was measured by spectrum analyzer with 100 KHz RBW and 300 KHz VBW. The 6dB bandwidth is defined as the total spectrum the power of which is higher than peak power minus 6dB. Test Configuration EUT SPECTRUM ANALYZER Test Results WIFI 6dB 6dB Limit Type Channel Bandwidth Ant1 Bandwidth Ant2 Result (KHz) (MHz) (MHz) 01 8.318 8.332 802.11b 06 9.072 8.333 ≥500 Pass 11 7.910 7.707 01 15.11 15.11 802.11g 06 15.11 15.12 ≥500 Pass 11 15.12 15.11 01 15.10 15.11 802.11n(HT20) 06 15.11 16.00 ≥500 Pass 11 15.11 16.02 03 35.07 35.09 802.11n(HT40) 06 35.08 35.10 ≥500 Pass 09 35.09 35.08 Test plot as follows:

V1.0 Page 28 of 54 Report No.: CTL1703037071-WF Ant 1 802.11b 802.11g CH01 CH01 CH06 CH06 CH11 CH11

V1.0 Page 29 of 54 Report No.: CTL1703037071-WF 802.11n(HT20) 802.11n(HT40) CH01 CH03 CH06 CH06 CH11 CH09

V1.0 Page 30 of 54 Report No.: CTL1703037071-WF Ant 2 802.11b 802.11g CH01 CH01 CH06 CH06 CH11 CH11


Document Created: 2017-06-07 17:27:42
Document Modified: 2017-06-07 17:27:42
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC