15_OZ-X400 UserMan

FCC ID: 2AL7B-X400

Users Manual

Download: PDF
FCCID_4006628

Product Name: Bluetooth Speaker Model No.: OZ-X400 FCC ID: 2AL7B-X400 450.0 mm 90.0 mm SAFETY INSTRUCTIONS THE SPEAKER’S BATTERY PLAY MUSIC USING MICROSD CARD HANDS-FREE FUNCTIONALITY Read all instructions A built-in rechargeable battery powers the speaker. Connect a microSD card and power on the speaker. 1. Connect your phone via Bluetooth, the speaker will play ringtones while a call coming. Only charge with devices rated and marked with 5V to avoid damage to the speaker. 2. Short press the multifunction key to answer the call on the speaker, you can talk to each other through Do not open up the speaker, it voids the warranty and may damage the product. CHARGING AUDIO CABLE CONNECTION the microphone hole, after call ended, it will continue to play music. Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles Connect the supplied charging cable to the charge input and to a USB port on your computer or a USB Power the speaker on. 3. Long press the multifunction key on the speaker to reject an incoming call. varies by use and settings. charger. The charging LED is lit red during charging. The LED turns off when fully charged.It is recommended Connect a 3.5 mm audio cable to the speaker and your device. 4. When you connect your phone, press twice in rapid multifunction key to call back the last call by Bluetooth Speaker Never place the speaker close to high temperature heat sources. To keep the warranty valid, never try to repair the product yourself. to charge 10 minutes before power on if you 7 days unused, then you can continue to use while charging. POWER ON/OFF The speaker is now connected to your device. THE MF BUTTON’S FUNCTIONALITY telephone. TECHNICAL PARAMTERS PARTSAND FUNCTIONS Power on: Long press power on the speaker, then the Bluetooth indicator light is on and you can connect Play / pause / answer incoming call / end call = short press on the MF-button. User Manual 60.0 mm ● Model: OZ-X400 1. Leather Lanyard Bluetooth devices. ● Bluetooth: 4.2+EDR compliant 2. power button: Long press to power on/off, short press to Power off: Long press power on the speaker, and then Bluetooth indicator will turn off. CHANGE VOLUME AND SONG ● Speaker: Ø40mm 4Ω 5W*2 transfer the playing mode. When listening to music ● Built-in rechargeable battery: Li-on, 3.7V, 2200mAh 3. +: The multi-function buttons: Long press to next song, CONNECT THE SPEAKER Increase volume: Short press on the “+” button. ● Charging time: 2.5 hours short press to increase the volume. On your device search for Bluetooth devices. Select the speaker from the list. Decrease volume: Short press on the “- “ button. ● Playing time: 18 hours 4. -: The multi-function buttons: Long press to previous song, The speaker will give an indication sound when the connection is successful. Previous song: Long press on the “-” button. ● Input: 5.0V 1.0A short press to decrease the volume. Only one Bluetooth device can be connected at the same time. Next song: Long press on the “+” button. ● Product Size: 73*73*182mm 5. The multi-function buttons:play/pause/answer call If you want to connect another device to the speaker, then first disconnect the current one. ● Product Weight: 432g WATER 6. Interconnect button, Please refer to the following DURING A CALL ● Range: Up to 10m RESISTANT T instructions for operation DISCONNECT THE SPEAKER Increase volume: Long press on the “+” button. IP67 IP67 7.TF card slot On your device, disconnect the Bluetooth connection with the speaker. Decrease volume: Long press on the “- “ button. 8.AUX IN cable connection interface PACKAGE INCLUDING OZ-X400 9.USB charging hole RECONNECT THE SPEAKER ● 1pcs* X400 wireless speaker ● 1pcs* Product manual 10.Charge indicator Some Bluetooth devices support automatic reconnection, with those devices the speaker will automatically ● 1pcs* Micro USB cable RATING 11.Microphone hole reconnect. 12.Bluetooth indicator The speaker will not automatically reconnect on devices that does not support automatic reconnection. 13.Charge indicator TWS CONNECTION FAULT AND MAINTENANCE FCC STATEMENT: Cannot connect the device with the speaker? 1: Turn on both speakers First fault: connection failed. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: RF warning statement: Disconnect other connected devices and then try again. 2: Press and hold the Play/Pause-button on one of the speakers for about 2 seconds until you hear a Solution: (1) This device may not cause harmful interference, and You can force a disconnection by moving out of “beep”sound. (1) Please check whether the multifunction indicator light flashes blue. Please power on your speakers if (2) This device must accept any interference received, including interference that may cause undesired The device has been evaluated to meet general RF exposure Bluetooth range (10 m). 3: Release Play/Pause button. It can take a few more seconds before speakers connect to each other. the light isn’t on. Please charge the speaker if the light is still not on. operation. requirement. The device can be used in portable exposure condition 4: Go into the Bluetooth menu on your smartphone and pair the speakers with your phone by selecting the (2) Please turn off the other Bluetooth devices, if there are many Bluetooth devices surrounding. This may without restriction. speaker model number . (it will only display 1 number which is both combined in to one) result in search difficulties. (3) Restart wireless speaker on devices for Bluetooth search function. WARNING: TROUBLESHOOTING TWS DISCONNECTION Second problem: The music player appears sound breaks. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The speaker does not turn on ? 1. Press and hold the Play/Pause-button on one of the speakers for about 2 seconds until you hear Solution: (1) View the distance between the player and the speaker has not been exceeded offective Bluetooth Recharge your speaker. a “beep”sound connection distance 8-12meters. NOTE (2) Ensure there is not any obstacle between the play device and speakers. NOTE (3) Check the playback device or whether the speaker is in a low power state. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant The speaker does not turn off or does not respond ? When speakers are previously paired with each other: If they do not automatically pair with each other to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Reset your speaker. when you turn them on, press and hold the Play/Pause button on one of the speakers for about 2 seconds. interference in a residential installation. This equipment generates uses and can radiate radio frequency It can take a few more seconds before the speakers connect to each other. NOTES BEFORE USE energy and, if not installed and used in accordance with the in structions, may cause harmful interference If you are connected to both speakers without the TWS connection between them, then you have to This product is designed with full attention for safety performance. To ensure safe operation, please follow to radio communications. There is no sound? disconnect from one of the speakers. the following rules: However, there is no guarantee that interference will not occur in a particular installation. If this equipment Adjust the volume. 1. Place the speakers in a stable position avoid fall and cause damage or personal injury. does cause harmful interference to radio or television reception, which can be determined by turning the Make sure that your Bluetooth device is within range. 2. Do not drop, disassemble, open, crush, bend, puncture, burn speaker. equipment off and on, the user is encouraged to try to correct the interference by one or more of the Ensure there is no obstacles in the way that can block/disturb the signal. EXPLANATION 3. Do not close to any heat source (such as radiators, heating equipment, stoves, or other heat-generating following measures: Check via the device’s Bluetooth connection if the speaker is connected with the device. 1. the symbol indicates: The product is only suitable for the safe non-tropical climates. equipment) where the use of speakers. Reorient or relocate the receiving an tenna. 2. Note: Please use the same type or equivalent type of battery to replace if the battery is scrapped. 4. Please send professional maintenance staff to repair for any reason damage. Increase the separation between the equipment and receiver. Otherwise maybe explosion occurs. 5. Before wiping with a dry cloth to clean the speakers, set the power switch to the off position and unplug Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. There is poor sound quality? 3. The lithium battery may be exposed such as fire or excessive heat. the power cord from the power outlet. Consult the dealer or an experienced radio/TV technician for help. Move the device closer to the speaker or try removing 6. Health considerations, please adjust the sound to a suitable level. obstacles between them.


Document Created: 2018-06-21 10:45:35
Document Modified: 2018-06-21 10:45:35
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC