Modular Approval Request

FCC ID: 2AL3B-ESPF1

Cover Letter(s)

Download: PDF
FCCID_4238860

ShenZhen Doctors of Intelligence & Technology Co.,Ltd. Modular Transmitter Approval Request Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Company name: ShenZhen Doctors of Intelligence & Technology Co.,Ltd. FCC ID: 2AL3B-ESPF1 Gentlemen, In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Certification Guide v01r04’. FCC ID 2AL3B-ESPF1 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee ‘Modular Certification Guide v01r04 (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry Yes, the product has its own RF shielding, shielded. Physical components and tuning capacitor(s) may be only shield the RF circuit. Physical located external to the shield, but must be on the module components and tuning capacitor(s) are on assembly the module assembly. The module must have buffered modulation/data inputs to ensure Yes, the module has buffered that the device will comply with Part 15 requirements with any modulation/data inputs. type of input signal Yes, the modular transmitter has its own The module must contain power supply regulation on the module power supply regulation. The module must contain a permanently attached antenna, or Yes, Contains a unique antenna connector contain a unique antenna connector, and be marketed and and a unique antenna. operated only with specific antenna(s), per Sections 15.203, See the following figure 1 15.204(b), 15.204(c), 15.212(a), 2.929(b) Yes, the module demonstrates compliance The module must demonstrate compliance in a stand-alone in a stand-alone configuration. configuration The module must be labelled with its permanently affixed FCC ID Yes, the module has its permanently affixed label, or use an electronic display (See KDB Publication 784748 FCC ID label and is laser engraved on the about labelling requirements) shield. The module must comply with all specific rules applicable to the Yes, the module complies with all specific transmitter including all the conditions provided in the integration rules applicable to the transmitter. instructions by the grantee Yes, the MPE report shows the module The module must comply with RF exposure requirements complies with RF exposure requirements. FCC – Modular Approval Request Rev 2.0

ShenZhen Doctors of Intelligence & Technology Co.,Ltd. figure 1 Name: Shang Liuji Date: 2019/4/9 Title: Manager Signature of applicant FCC – Modular Approval Request Rev 2.0


Document Created: 2019-04-12 09:37:06
Document Modified: 2019-04-12 09:37:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC