User manual

FCC ID: 2AKU5510

Users Manual

Download: PDF
FCCID_4084313

SERIES SERIES A video output port is provided next to the USB interface at the bottom of the thermal imager, and will output the image of the thermal imager to an external monitor for display through the supplied the video cable. Simultaneously press "Image Mode Button + Zoom Button" to turn on the video output; in the video output status, there is a video output icon. Cursor switch Simultaneously press the “Image Mode Button + Brightness Button” to switch on/off the cursor. Thermal imagers shall not be pointed to high- strength energy sources (including the Sun, laser transmitting equipments and their reflection sources), which otherwise will have a negative influence on its accuracy and damage or permanently damage infrared detector of it. When the thermal imager will be not used for a long time, charge the thermal imager at least 2.5 hours every two months during the storage, and store the thermal imager in a dry and well- ventilated environment. Human eyes shall not be irradiated by the laser designator of the thermal imager. Do not charge the battery in an environment over 40℃. Our company shall not bear any legal responsibility for any mistake and accident caused by own reasons or reasons of Statement： any third party in the course of using this product by the user This guide is applicable to the IR510 Nano series products, including the following four models. The differences are as follows,please or property loss and personal injury caused by misjudgment carefully read this guide before using the thermal imager. against images. We prepare this guide with the purpose of facilitating users to Lens Function use and understand our products. We will try our best to Model 25mm (supports Image ensure the accuracy of contents of this guide, but we still 19mm expansion lens) Wifi(APP) Freeze enhance cannot ensure the completeness of contents of it. Since we IR510 N1 √ × × √ × have been continuously updating and upgrading our products, IR510 N1 WIFI √ × √ × √ we reserve the right to modify this guide at any time without IR510 N2 × √ × √ × prior notice. IR510 N2 WIFI × √ √ × √ http://www.guideir.com WUHAN GUIDE SENSMART TECH CO.,LTD.

SERIES SERIES The thermal imager has three power states: Power On, Standby and Power Off； Click this button to switch the white hot mode, black hot mode and red hot mode; Power On: Press and hold the power button for 2 seconds, so that the thermal imager is turned on, and the startup White Hot Mode The object with higher temperature screen appears on the eyepiece; shows in white or light gray; Standby: Black Hot Mode The object with higher temperature Manual standby: Press the power button to enter the shows in black or dark gray; standby mode in the power-on status; Red Hot Mode The object with higher temperature Automatic standby: In the power-on status, if there is no shows in red; button operation within five minutes, the automatic standby WIFI switch Press and hold the “Image Mode Button” prompt will pop up; The automatic standby will be cancelled to switch on/off WIFI. by any button operation during the standby prompt display; Cancel Standby: In the standby mode, press any button to WiFi Connection cancel standby. The thermal imager can be connected by WIFI and mobile phone, and most all functions（except Startup and Power Off: Shutdown）of its buttons being controlled remotely by Manual power off: Press and hold the power button for 2 APP on mobile phone. seconds so that the thermal imager is powered off; Users need to search and download “Thermal Viewer” Auto power off: In the standby state, if there is no button APP from a mobile phone application market, then open operation within 30 minutes (default), the thermal imager will the APP, find the WIFI “Handheld-TI” and enter the automatically shut down. password "12345678". Once the connection is successful, users can operate the thermal imager remotely. Click to set five brightness levels of the image; Light/laser Press and hold the button to switch indicator on/off the light/laser indicator. Before using the thermal imager for the first time, be sure to Notice:This model is equipped with a 25mm extended charge the thermal imager for at least three hours with the lens which can block the laser emission. matched USB charger. During charging, please pull out the USB cover at the bottom of the thermal imager, insert the supplied USB charging Zoom button cable, and engage the power to charge the battery. (Charging voltage is 5V) Click this button to enlarge the image by 2x and 4x in During normal charging, the charge indication light will turn turns red; Freeze: Press and hold the button to freeze the current screen with the Frz icon appearing at the left upper corner When the charging is completed, the charge indication light of the screen. Press any button to retrieve the real-time will turn green. screen. Image enhance: Press and hold the button to set 5 enhancement levels of image. When the thermal imager is turned on, the battery power Diopter adjustment identification is shown at the lower left corner of the screen. The lighted battery power identification shows the remaining The diopter adjustment knob is used to adjust the battery power. eyepiece diopter in order to suit users of different- level myopia. http://www.guideir.com WUHAN GUIDE SENSMART TECH CO.,LTD.

FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.


Document Created: 2018-11-26 14:46:59
Document Modified: 2018-11-26 14:46:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC